Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 610B9054 injector spring supports stable injector operation on BUKH DV10 and DV20 marine diesel engines. Designed for the injector assembly, it helps maintain correct internal loading so the injector can operate consistently, promoting reliable fuel delivery and smooth engine running. |
$ 35
-
+
|
|
1-2 weeks delivery time The Bukh 610B9082 injector nozzle jet (R31092/2) is a precision fuel-injection component for BUKH marine diesel applications. Installed within the injector, it helps deliver the correct fuel spray pattern for clean, efficient combustion and dependable engine response under load. |
$ 332.11
-
+
|
|
1-2 weeks delivery time The Bukh 610B9122 injector nozzle insert is a fuel-injection component for BUKH DV24 and DV36 marine diesel engines, supporting clean, consistent fuel delivery at the injector tip. Supplied with reference number 0433 171 035, it is suited for restoration of proper injector performance during service or overhaul. |
$ 509.56
-
+
|
|
1-2 weeks delivery time The Bukh 610D0085 fuel filter (R60008) is a filtration component for the engine fuel system, designed to help keep diesel supply clean before it reaches sensitive fuel-system parts. By capturing contaminants from the fuel stream, it supports stable running, protects precision components, and helps maintain dependable performance in marine service. |
$ 89.80
-
+
|
|
1-2 weeks delivery time The Bukh 610D0210 fuel filter head is a key fuel-system component that supports secure mounting and correct routing for the fuel filter on Bukh marine engines. Designed as an OEM-style replacement, it helps maintain clean, well-managed fuel delivery by providing a stable connection point for the filtration stage in the engine’s fuel supply system. |
$ 97.14
-
+
|
|
1-2 weeks delivery time The Bukh water trap is intended for marine fluid system water separation applications. |
$ 1,391.17
-
+
|
|
1-2 weeks delivery time The Bukh 610E0500 pipe element is a two-circuit system line component designed for BUKH DV36 and DV48 marine diesel engines. Installed within the two-circuit cooling arrangement, it supports controlled coolant flow between connected sections of the system, helping maintain stable operating temperature and reliable heat management underway. |
$ 2,274.04
-
+
|
|
1-2 weeks delivery time The Bukh 610G0074 lid is a protective cover component used to close off its designated opening in a Bukh assembly, helping keep internal parts shielded from splash, dirt, and accidental contact in marine service. It is suited for replacement where an OEM-style lid is required to restore proper enclosure and secure fit. |
$ 48.21
-
+
|
|
1-2 weeks delivery time The Bukh 610G0075 shaft is a rotating drivetrain component for Bukh marine engine installations, designed to transmit torque smoothly and maintain accurate alignment in the shaft system. It is a practical replacement choice when restoring reliable power transfer and reducing wear across connected rotating parts. |
$ 152.67
-
+
|
|
1-2 weeks delivery time The Bukh 610G0092 impeller is a replacement pump rotor designed to restore reliable water flow in marine engine support systems. Supplied as the requested alternative to replacement item 09-806B-1, this Bukh impeller helps maintain consistent circulation and dependable operation when renewing worn pump internals. |
$ 69.94
-
+
|
|
1-2 weeks delivery time The Bukh 610G0104 water pump cover is a 4-hole cover plate designed to close and protect the water pump assembly on BUKH marine engines using this mounting pattern. It supports correct pump operation by securing the pump housing and helping maintain a controlled cooling-water circuit in demanding onboard conditions. |
$ 48.21
-
+
|
|
1-2 weeks delivery time The Bukh 610G0105 shaft is a precision drivetrain component (reference 01-45175) designed to transmit rotational force within a Bukh marine assembly. Ideal for service replacements, it helps restore smooth, dependable power transfer and supports stable operation of the equipment it is installed in. |
$ 236.21
-
+
|
|
1-2 weeks delivery time The Bukh 610G0106 comb is a genuine Bukh component intended for Bukh applications where a comb element is required. Supplied under the Bukh part number for dependable fit and straightforward replacement in service and maintenance contexts. |
$ 103.81
-
+
|
|
1-2 weeks delivery time The Bukh 610G0107 rifled bushing is a precision support sleeve designed to help maintain correct alignment and smooth operation where a shaft or moving component runs in a bore. Used as a wear surface in BUKH engine assemblies, it helps reduce play, supports consistent running clearances, and contributes to reliable long-term service. |
$ 126.36
-
+
|
|
1-2 weeks delivery time The Bukh 610G0109 retaining ring is a locking ring designed to secure fitted components in place and help prevent unintended movement during engine operation. Used as a dependable mechanical locking element, it supports stable assembly retention where a positive ring-type stop is required. |
$ 10.43
-
+
|
|
1-2 weeks delivery time The Bukh 610G0121 impeller is a seawater-pump pumping element designed to restore dependable raw-water flow in Bukh marine engine cooling systems. Replacing a worn impeller helps maintain steady seawater circulation through the heat exchanger circuit, supporting stable operating temperature and reducing the risk of overheating underway. |
$ 106.08
-
+
|
|
1-2 weeks delivery time The Bukh 610G0122 sealing gasket is a replacement seal intended for Bukh engine service work, helping maintain tight, leak-resistant joints between connected components. Used during maintenance and reassembly, it supports clean operation by keeping fluids and pressure where they belong in the engine system. |
$ 6.44
-
+
|
|
1-2 weeks delivery time The Bukh impeller is designed for marine engine cooling pump service applications. |
$ 82.75
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.