Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh DBI plug is designed for marine engine sealing or service applications. |
$ 2.94
-
+
|
|
1-2 weeks delivery time The Bukh DBI plug is intended for marine engine sealing or service applications. |
$ 2.94
-
+
|
|
1-2 weeks delivery time The Bukh 541A0523 R&D flexible coupling is a drivetrain coupling element designed to connect the engine side to the transmission or shaft line while helping smooth out torsional vibration and minor misalignment. Built for marine propulsion duty, it supports quieter, more stable power transfer and helps protect connected components from shock loads. |
$ 821.42
-
+
|
|
1-2 weeks delivery time The Bukh ball joint is intended for marine engine control linkage and mechanical connection applications. |
$ 80.35
-
+
|
|
1-2 weeks delivery time The Bukh 541A2002 ball joint is a precision linkage component for BUKH DV10LME marine diesel engines, designed to provide smooth, controlled articulation where a jointed connection is required. It helps maintain accurate movement transfer in the engine’s mechanical linkage system while supporting reliable operation in marine service. |
$ 80.35
-
+
|
|
1-2 weeks delivery time The Bukh ball joint is intended for marine engine control linkage applications. |
$ 46.31
-
+
|
|
1-2 weeks delivery time The Bukh 542A0620 V-belt is a drive belt for the dynastart system on BUKH DV10 and DV20 marine diesel engines. Designed for dependable power transmission, it helps the dynastart maintain consistent operation by transferring rotational drive reliably in demanding marine engine-room conditions. |
$ 94.01
-
+
|
|
1-2 weeks delivery time The Bukh 544A0300 rubber-lined pipe is a marine-grade routing component designed to carry fluids while adding an internal protective lining. Built for Bukh applications, it supports clean, controlled flow through the connected system and is well-suited for service replacement where a lined pipe section is required. |
$ 6.15
-
+
|
|
1-2 weeks delivery time The Bukh 544A1055 fork with locking plate is a practical retention component designed to secure a forked connection and help keep hardware positively locked in place under vibration. Ideal for marine-duty installations, it supports dependable mechanical fastening where a locked fork arrangement is required. |
$ 38.57
-
+
|
|
1-2 weeks delivery time The Bukh 545A0002 ball bearing is a precision bearing element for Bukh sail drive assemblies, supporting smooth shaft rotation while helping control radial loads for stable, efficient power transmission. It is an OEM-style replacement choice for maintaining reliable, low-friction operation in the sail drive drivetrain. |
$ 120.53
-
+
|
|
1-2 weeks delivery time The Bukh 545A0178 bearing is a precision support component designed to keep rotating parts running smoothly and aligned in Bukh marine equipment. By reducing friction and stabilizing shaft movement, it helps protect surrounding components, supports reliable operation, and is well-suited as an OEM replacement part. |
$ 28.49
-
+
|
|
1-2 weeks delivery time The Bukh 545A0193 6203 ball bearing is a precision rolling-element component used to support rotating shafts and reduce friction in BUKH marine machinery. Designed as an OEM-grade replacement, it helps maintain smooth operation, stable alignment, and reliable service life in bearing-supported assemblies. |
$ 78.08
-
+
|
|
1-2 weeks delivery time The Bukh ball bearing is intended for marine engine mechanical support and rotating assembly service applications. |
$ 35.35
-
+
|
|
1-2 weeks delivery time The Bukh 545E1152 bearing is a precision drivetrain component for the saildrive propeller shaft, supporting smooth shaft rotation and stable alignment under load. Designed for marine saildrive service, it helps reduce friction and wear in the propeller shaft area for dependable power transfer. |
$ 257.93
-
+
|
|
1-2 weeks delivery time The Bukh steel ball is intended for marine mechanical linkage or valve system applications. |
$ 20.11
-
+
|
|
1-2 weeks delivery time The Bukh stainless steel ball is intended for marine mechanical linkage or valve system applications. |
$ 52.02
-
+
|
|
1-2 weeks delivery time The Bukh 545V0033 needle bearing is a precision rolling-element component for the saildrive propeller shaft arrangement. Designed to support smooth shaft rotation under load, it helps maintain stable alignment and dependable power transmission in Bukh saildrive installations. |
$ 49.01
-
+
|
|
1-2 weeks delivery time The Bukh 545V0049 needle bearing is a precision rolling-element bearing designed to support rotating shafts and reduce friction in Bukh marine engine assemblies. Built for smooth, stable operation under continuous load, it helps maintain accurate alignment and dependable power transmission in critical drivetrain and accessory components. |
$ 80.35
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.