Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh left-hand cylinder head sub assembly is engineered for marine diesel engine repair and replacement applications. |
$ 19,245.05
-
+
|
|
1-2 weeks delivery time The Bukh gear selector arm is designed for marine gearbox shifting control applications. |
$ 134.67
-
+
|
|
1-2 weeks delivery time The Bukh right-hand cylinder head sub assembly is intended for marine diesel engine servicing and overhaul applications. |
$ 14,810.39
-
+
|
|
1-2 weeks delivery time The Bukh right-hand cylinder head sub assembly is intended for marine diesel engine servicing and overhaul applications. |
$ 19,245.05
-
+
|
|
1-2 weeks delivery time The Bukh connecting rod bolt is intended for marine diesel connecting rod assembly and overhaul applications. |
$ 73.46
-
+
|
|
1-2 weeks delivery time The Bukh alternator pulley is intended for marine engine alternator belt drive applications. |
$ 308.93
-
+
|
|
1-2 weeks delivery time The Bukh ribbed pulley is designed for V8 marine engine belt drive applications. |
$ 343.34
-
+
|
|
1-2 weeks delivery time The Bukh Sherwood cooling pump pulley is designed for marine pump drive system applications. |
$ 397.20
-
+
|
|
1-2 weeks delivery time The Bukh Sherwood pump pulley is designed for marine pump belt drive system applications. |
$ 308.83
-
+
|
|
1-2 weeks delivery time The Bukh flange bolt is intended for marine engine fastening and service applications. |
$ 4.28
-
+
|
|
1-2 weeks delivery time The Bukh 41537 washer set supports secure installation of the elastic mounting arrangement referenced as 000E1537. Designed to distribute load and help maintain correct clamping in the mounting stack-up, these washers contribute to stable alignment and reduced vibration transfer in marine engine installations. |
$ 2.50
-
+
|
|
1-2 weeks delivery time The Bukh 41591 washer is a precision support washer used in an elastic mounting arrangement, helping distribute clamping load and maintain secure alignment under vibration. Supplied as the washer for elastic mounting reference 000E1591, it supports reliable retention of mounted components in marine engine installations. |
$ 2.50
-
+
|
|
1-2 weeks delivery time The Bukh flange bolt is designed for marine engine assembly and fastening applications. |
$ 4.21
-
+
|
|
1-2 weeks delivery time The Bukh bolt is intended for marine engine assembly and fastening applications. |
$ 2.58
-
+
|
|
1-2 weeks delivery time The Bukh flange bolt is intended for marine engine assembly and service applications. |
$ 5.39
-
+
|
|
1-2 weeks delivery time The Bukh cylinder head sub assembly is intended for R210 marine diesel engine servicing and overhaul applications. |
$ 20,461.38
-
+
|
|
1-2 weeks delivery time The Bukh lower gasket set is designed for V8 marine diesel engine service and sealing applications. |
$ 2,500.39
-
+
|
|
1-2 weeks delivery time The Bukh top gasket set is designed for marine diesel engine service and sealing applications. |
$ 4,929.92
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.