Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 00130-BS150 main PTO bracket is a robust mounting component for the main bracket arrangement on BUKH S270J marine diesel engines. It supports secure positioning of PTO-related hardware, helping maintain correct alignment and dependable power take-off operation in demanding onboard environments. |
$ 4,856.36
-
+
|
|
1-2 weeks delivery time The Bukh 00130-BS155 shift cable support bracket secures and supports the shift cable routing in the BUKH S270J power steering assembly. By keeping the cable properly positioned, it helps maintain smooth, predictable control operation and reduces unwanted cable movement in a marine engine installation. |
$ 326.80
-
+
|
|
1-2 weeks delivery time The Bukh 00130-BS157 upper ECU box support bracket secures the ECU box in the power steering installation on BUKH S270J marine engines. Designed to provide stable mounting for the shaft-related arrangement, it helps keep the control unit supported and protected against vibration in marine operation. |
$ 105.11
-
+
|
|
1-2 weeks delivery time The Bukh 00200-0T001 engine mount tool is a dedicated service tool used in the special tool kit for BUKH R210J and BUKH S270J marine engines. Designed to support accurate engine mount handling during maintenance, it helps technicians position and work on the mounting arrangement more efficiently for dependable alignment and installation work. |
$ 5,257.33
-
+
|
|
1-2 weeks delivery time The Bukh 00200-0T002 engine alignment tool is a dedicated service tool supplied for the Special Tool Kit used on BUKH R210J and BUKH S270J marine diesel engines. It helps technicians position and align the engine correctly during installation or service work, supporting accurate coupling alignment and reducing the risk of vibration and drivetrain wear. |
$ 994.15
-
+
|
|
1-2 weeks delivery time The Bukh 00200-0T003 transom fixture tool is a dedicated service tool used within the special tool kit for BUKH R210J and S270J marine engines. It supports accurate positioning and secure handling when working around the transom-related installation and service tasks, helping technicians complete maintenance work efficiently and consistently. |
$ 5,105.10
-
+
|
|
1-2 weeks delivery time The Bukh 00263-5S090 engine oil filter service kit supports clean, consistent lubrication for BUKH S270J marine diesel engines in the engine oil pump system. Designed for routine maintenance, it helps protect oil-fed components by keeping contaminants under control, promoting dependable oil flow and long service life in marine operation. |
$ 73.41
-
+
|
|
1-2 weeks delivery time The Bukh 00300-1A004 marine diesel engine oil (4 L) is formulated for routine service on BUKH R210J and BUKH S270J engines. It supports dependable lubrication of internal engine components, helping protect against wear and maintaining smooth operation in marine duty cycles. |
$ 147.85
-
+
|
|
1-2 weeks delivery time The Bukh 00320-1U100 oil cooler assembly supports stable lubrication performance on BUKH R210J marine diesel engines by reducing oil temperature within the engine’s oil cooling system. By helping control heat buildup in the lubricant circuit, it promotes consistent oil viscosity and dependable protection of internal engine components in marine duty. |
$ 1,409.65
-
+
|
|
1-2 weeks delivery time The Bukh 00320-1U131 seawater inlet hose is designed for the oil cooler assembly on BUKH R210J marine diesel engines. It routes incoming seawater into the oil cooler, supporting stable oil temperatures and dependable lubrication performance under continuous marine operation. |
$ 95.75
-
+
|
|
1-2 weeks delivery time The Bukh 00320-1U132 seawater outlet hose is a dedicated cooling-water line for the oil cooler on BUKH R210J marine diesel engines. It routes seawater away from the oil cooler outlet to keep flow steady through the cooling circuit, supporting reliable temperature control during continuous operation. |
$ 150.72
-
+
|
|
1-2 weeks delivery time The Bukh 00320-2R134 oil inlet hose is a dedicated hose for the oil cooler circuit on BUKH R210J marine engines. It routes incoming oil flow to the oil cooler, supporting stable oil temperature control and dependable lubrication performance under continuous marine operating conditions. |
$ 240.30
-
+
|
|
1-2 weeks delivery time The Bukh 00320-2R135 TM oil outlet hose is a dedicated outlet line for the oil cooler circuit on BUKH R210J marine diesel engines. Designed to route cooled oil reliably from the cooler outlet, it supports stable lubrication flow and helps protect the engine under continuous marine operating loads. |
$ 96.53
-
+
|
|
1-2 weeks delivery time The Bukh 00320-5S150 oil cooler bracket is a dedicated mounting component for the oil cooler on BUKH S270J marine diesel engines. It supports secure positioning of the oil cooler in the engine installation, helping maintain correct alignment and reducing movement and vibration in the oil cooling assembly. |
$ 210.13
-
+
|
|
1-2 weeks delivery time The Bukh 00320-5S151 steel band is a securing component for the oil cooler installation on BUKH S270J marine diesel engines. Designed to hold the cooler assembly firmly in place, it supports reliable mounting under vibration and helps maintain stable oil cooling performance in marine service. |
$ 74.71
-
+
|
|
1-2 weeks delivery time The Bukh 00320-5S160 oil cooler assembly is a dedicated cooling unit for the oil cooler system on BUKH S270J marine diesel engines. It helps regulate oil temperature during operation, supporting consistent lubrication performance and protecting critical engine components under sustained marine loads. |
$ 3,292.08
-
+
|
|
1-2 weeks delivery time The Bukh 00320-5S191 rubber band secures and supports the oil cooler installation on BUKH S270J marine diesel engines. Designed for the oil cooler assembly, it helps keep the cooler positioned correctly to reduce movement from vibration and maintain a tidy, reliable engine-room layout. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 00340-2R131 inlet hose is a dedicated oil-line component for the oil extraction pump system on BUKH R210J marine diesel engines. Installed in the oil pan assembly, it supports clean, controlled oil pickup to the extraction pump, helping make routine oil removal faster and more dependable onboard. |
$ 87.22
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.