Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh fuse box with cover is designed for V8 LML marine engine electrical protection applications. |
$ 186.69
-
+
|
|
1-2 weeks delivery time The Bukh turbocharger assembly supports marine diesel engine performance and air intake system applications. |
$ 17,390.76
-
+
|
|
1-2 weeks delivery time The Bukh lower crankshaft bearing kit is intended for marine diesel engine crankshaft service applications. |
$ 1,565.03
-
+
|
|
1-2 weeks delivery time The Bukh connecting rod bearing set is designed for V8 marine diesel crankshaft and rod service applications. |
$ 425
-
+
|
|
1-2 weeks delivery time The Bukh camshaft bearing is intended for marine diesel camshaft support and engine rebuild applications. |
$ 1,221.02
-
+
|
|
1-2 weeks delivery time The Bukh connecting rod bearing set is intended for marine diesel engine overhaul and bearing replacement applications. |
$ 425
-
+
|
|
1-2 weeks delivery time The Bukh connector housing is designed for V8 marine engine electrical connection applications. |
$ 158.77
-
+
|
|
1-2 weeks delivery time The Bukh 12V 40A relay is designed for marine engine electrical switching and control applications. |
$ 43.93
-
+
|
|
1-2 weeks delivery time The Bukh voltmeter is designed for marine engine electrical voltage monitoring applications. |
$ 245.22
-
+
|
|
1-2 weeks delivery time The Bukh 201-02318 tapped sump drain plug is a 1/4 BSP threaded plug used in the fuel connections arrangement on BUKH EPA36 engines. It provides a secure, service-friendly drain point to support routine maintenance and controlled draining from the sump area. |
$ 124.46
-
+
|
|
1-2 weeks delivery time The Bukh S3 manifold stud is designed for marine engine manifold fastening applications. |
$ 35.13
-
+
|
|
1-2 weeks delivery time The Bukh 90-degree quick connector is designed for marine engine fluid line connection applications. |
$ 58.37
-
+
|
|
1-2 weeks delivery time The Bukh flywheel inertia and adaptor ring is designed for marine drivetrain and engine installation applications. |
$ 1,037.22
-
+
|
|
1-2 weeks delivery time The Bukh extended speed control lever is designed for Super5 marine engine throttle control applications. |
$ 76.06
-
+
|
|
1-2 weeks delivery time The Bukh tank gasket is designed for marine tank sealing and service applications. |
$ 59.27
-
+
|
|
1-2 weeks delivery time The Bukh 202-09168 sealing plate is a precision sealing component used to close and seal a mating surface in Bukh marine engine assemblies. It helps maintain a tight joint between adjoining parts, supporting leak prevention and dependable operation in marine service environments. |
$ 108.10
-
+
|
|
1-2 weeks delivery time The Bukh fuel overflow pipe is designed for marine diesel fuel return and overflow system applications. |
$ 250.02
-
+
|
|
1-2 weeks delivery time The Bukh 135-degree quick connector is intended for marine engine fluid line connection applications. |
$ 58.37
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.