Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 008E5440 exhaust water line T-piece is a branched connector used in the exhaust water line on BUKH DV36 two-circuit marine diesel engines. It routes cooling water to the correct sections of the exhaust water circuit, supporting stable water flow management and dependable exhaust cooling in marine operation. |
$ 441.73
-
+
|
|
1-2 weeks delivery time The Bukh 008E5840 relay is a reliable switching component for Bukh sail drive systems. Designed to manage electrical control circuits, it supports dependable operation by ensuring stable engagement and control where a robust marine-grade relay is required in the sail drive electrical system. |
$ 559.59
-
+
|
|
1-2 weeks delivery time The Bukh engine base frame is intended for marine engine mounting and installation applications. |
$ 2,448.68
-
+
|
|
1-2 weeks delivery time The Bukh 008E6248 outlet pipe is a water-pump connection component that routes cooling water out of the pump and into the next section of the engine’s cooling circuit. Designed for marine use, it supports secure hose or pipework connection and steady coolant flow, making it a dependable choice when renewing a worn, corroded, or leaking outlet on the water pump assembly. |
$ 264.39
-
+
|
|
1-2 weeks delivery time The Bukh 008E6254 sea water pump unit supports dependable raw-water flow on BUKH DV36 marine diesel engines. Designed for the sea water pump position, it delivers the cooling water supply needed for stable operating temperatures and reliable running at sea. |
$ 2,830.89
-
+
|
|
1-2 weeks delivery time The Bukh 008E6365 charge-pressure hose is a flexible connection element used in the engine’s boost air circuit on BUKH marine engines. It helps route pressurized intake air through the charge pressure system while maintaining a secure, leak-resistant flow path for stable engine performance under load. |
$ 69.12
-
+
|
|
1-2 weeks delivery time The Bukh 008E6398 complete cooling water pipe is a ready-to-install line for the engine cooling water circuit, designed to route coolant securely between key cooling components. It helps maintain consistent coolant flow, supporting stable operating temperature and dependable marine engine operation. |
$ 508.66
-
+
|
|
1-2 weeks delivery time The Bukh 008E6399 manifold distribution pipe is an OEM replacement component designed to route and distribute flow through connected engine lines. Built for dependable integration in Bukh engine systems, it helps maintain orderly, secure connections between circuits for consistent operation onboard. |
$ 851.78
-
+
|
|
1-2 weeks delivery time The Bukh 008E6467 seawater-cooling bypass component supports controlled coolant flow management within the seawater cooling circuit on BUKH DV48 marine diesel engines. Designed to suit the DV48 installation, it helps maintain stable cooling system operation by providing a dedicated bypass path as part of the seawater cooling arrangement. |
$ 315.80
-
+
|
|
1-2 weeks delivery time The Bukh 008E6567 pump elbow is a formed connector designed for use on a Bukh installation with a Johnson pump. It provides a secure change of flow direction at the pump interface, helping route connected lines cleanly and supporting tidy, reliable pump plumbing in marine service. |
$ 171.94
-
+
|
|
1-2 weeks delivery time The Bukh 008E6673 distribution kit is a replacement kit for the distribution assembly on BUKH DV10LME marine diesel engines. Supplied as a complete kit for service work, it helps restore correct distribution within the relevant engine system and supports reliable, orderly operation onboard. |
$ 766.41
-
+
|
|
1-2 weeks delivery time The Bukh 008E7009 engine mounting bracket supports secure installation of BUKH DV10LSME marine diesel engines by stabilizing the engine on its foundation and helping control vibration transfer into the hull. Built for correct alignment and dependable hold-down, it is a practical OEM-grade replacement when servicing worn, damaged, or corroded mounting hardware. |
$ 895.96
-
+
|
|
1-2 weeks delivery time The Bukh pipe is designed for marine engine fluid, air, or exhaust system applications. |
$ 65.88
-
+
|
|
1-2 weeks delivery time The Bukh front engine support bracket is designed for marine engine mounting applications. |
$ 286.29
-
+
|
|
1-2 weeks delivery time The Bukh rear stern tube bearing is designed for marine shaft support and stern tube applications. |
$ 863.01
-
+
|
|
1-2 weeks delivery time The Bukh 008E7599 ignition lock is a key-operated switch unit for BUKH RME marine engine installations, designed to enable controlled power-on and secure shutoff from the helm or engine control panel. It supports reliable starting and protects against unauthorized operation by providing a dedicated ignition key point in the electrical system. |
$ 730.75
-
+
|
|
1-2 weeks delivery time The Bukh 008E7710 thermostat housing cover is a cooling-system component designed to close and protect the thermostat housing on Bukh marine engines. Fitted as part of the thermostat housing assembly, it helps keep the thermostat area securely enclosed for dependable coolant temperature control in marine operation. |
$ 349.31
-
+
|
|
1-2 weeks delivery time The Bukh 008E7894 rubber cap with an integrated drain plug is a practical sealing component designed to close off a service opening while allowing controlled draining when required. It helps keep the system tidy and protected during operation, and simplifies routine maintenance by providing a dedicated drain point. |
$ 216.14
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.