Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus P12436 gearbox unit is engineered for the Maxwell HWC 1500 windlass series and is specified with a 56:1 gear ratio. Intended for windlass power transmission in marine anchoring applications, this gearbox supports smooth and reliable windlass system operation as a driveline component within the HWC 1500 setup.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P12487 Maxwell engine bolt component is intended to secure a boat’s marine engine by providing a stable fastening point within the propulsion installation. The input specifies precision engineering and construction from high-quality materials, supporting a secure and stable engine connection during maintenance or propulsion system upgrades.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P14077 hydraulic bow thruster unit (Maxwell 3500 VWC series) is specified with a thrust power of 100 and uses HYD (hydraulic) drive. It incorporates ACW (Anti-Cavitation Propeller) technology to reduce cavitation during operation and is supplied with CR (Remote Control) functionality for vessel maneuvering in marine applications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P14099 hydraulic anchor winch unit is the Maxwell VW2200 model intended for hydraulic operation on marine vessels. Identified by item number P14099, it is specified as an anchor-handling winch designed for use in marine environments.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P14180 upper clutch disc component is intended for clutch engagement within VWC5000-6000 windlass systems. Identified as the upper disc in the clutch stack, it supports smooth operation by enabling precise and efficient clutch engagement in the windlass assembly.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P14295 Maxwell HWC3500 hydraulic windlass unit is part of the Maxwell HWC Series and is intended for automatic horizontal handling of chain-only anchor rods. It incorporates a hydraulic motor with fully automatic chainring operation in one or two directions, plus an independent stainless steel warp drum for front and rear rope pulling. The cone-shaped clutch/brake mechanism supports manual anchoring in “free fall” with smooth, progressive engagement, and the chain ring and warping drum are chrome-plated over marine bronze within a seawater-resistant alloy housing that is pre-treated, powder-coated, and finished in white two-component polyurethane paint for marine service.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P14368 hydraulic motor unit is a Maxwell hydraulic motor intended for marine hydraulic system service, including propulsion-related duties and other onboard hydraulic functions. It is described as precision engineered with durable construction to support reliable operation across varied marine applications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P19221 up/down remote control unit is a Maxwell control interface intended for installation on a 24V instrument board. It provides up/down actuation control from the instrument board as part of onboard system operation.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P20040 clutch nut handle control lever is an accessory intended for Maxwell windlasses in the HRC series. Identified by product code P20040, it is used to adjust the windlass clutch nut for controlled operation and servicing of the windlass system.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus P20044 lever-handle assembly in Maxwell style is a marine fixture component intended to provide functional operation with an ergonomic form factor. It is described as having high-quality construction for durability, is specified as easy to install, and is stated to be compatible with various boat models.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus PM111B PM111 porthole assembly is a Category 1 hull-side opening unit with a black satin anodized aluminum frame and a “smoke” colored opening pane. It is specified with a clamp fixing mechanism to provide a flush external appearance with no visible fasteners, and the opening pane is described as providing UV protection.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus PZ651P porthole assembly is an aluminum portlight in the PZ651 series, supplied with a powder-painted black finish and an integrated mosquito net. It is specified as Type PZ651, rated Class A1, and has overall dimensions of 375x166mm for marine or architectural installations requiring ventilation with insect protection.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus RCBP radio-control kit is a single-station thruster control solution for bow or stern thrusters, using a radio connection to eliminate cable installation between the thruster and the control panel. It is specified as compatible with both 12 Volt and 24 Volt electrical systems and is intended to simplify thruster operation in marine vessels and other applications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus RCMBP2 double-station wireless remote control installation kit is an accessory for bow and stern thruster systems, providing a radio control interface without a connecting cable between the thruster and the control panel. The assembly set includes a transmitter and receiver with a recommended operating distance of up to 15 meters, is suitable for 12 V or 24 V DC installations, and is rated for 25 A; delivery includes a connector plug.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus RCMRX2 auxiliary 2-channel receiver module is intended for use with the Vetus RCM2 radio remote control system and supports 12 V and 24 V electrical installations. It operates at 433.92 MHz, provides a maximum switching current of 3 A (12/24 V), and can be paired with up to 5 remote controls per receiver; the unit is FCC and CE/EMC approved and is supplied without a handheld power supply.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus RCMRX4 receiver module is a 4-channel unit intended for 12/24V electrical systems and supplied as an extra receiver for use with the Vetus Rcm4 radio remote control. It is specified for marine equipment control applications where an additional 4-channel receiver is required within the Rcm4 remote control setup.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus RPI1810B rudder angle indication instrument is a black-faced rudder position indicator intended to display rudder position on marine vessels and supports both 12V and 24V electrical systems. It is specified with a 100 mm panel cutout diameter and a 114 mm outer diameter, and uses a translucent dial illuminated from behind for readability. The unit is described as double glazed for durability and protection against moisture and corrosion.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus RPI1810W rudder position indicator instrument is an ENGINE INSTRUMENTS gauge with a cream finish, intended for dashboard installation with a Ø 107 mm hole size. It uses a backlit scale to improve readability of rudder position in varying lighting conditions and is suitable for both 12 V and 24 V marine electrical systems.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus S.PT112A Prometech acoustic insulation panel is a sound insulation sheet intended for compact installations, including generator enclosures, using high-performance acoustic polyurethane foam with a polymeric barrier and a single 12mm aluminium face. Supplied in 1000 x 600mm sheets, it has a density of 94.7kg/m³, thermal conductivity of 0.036 W/m.k, and an operating temperature range from -30º C to 110º C, with listed self-extinguishing and fire test classifications including BS4735, FMVSS 302, ASTM D1692, UL94-HF1 & VO, and BS476 Part 7 Class 1 plus Part 6 & 7 Class 0.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Vetus S.PT145W Prometech Single sound insulation sample is a Prometech foam acoustic insulation sheet with a single damping layer, supplied in 600 x 1000 mm format and 45 mm total thickness. It is rated BS476 Class 0 fire resistant and is finished with a white glass cloth facing plus a self-adhesive backing for installation. Stated weight is 5.4 kg.
|
Our managers will contact you and clarify the terms of the order
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.