Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus BP1068 spacer component is a precision-engineered accessory for Vetus BOW220 marine thruster systems, specified with a diameter of 300 mm. It is intended to optimize equipment fit and operational alignment within the BOW220 setup and is supplied as a spare part for Vetus marine thruster installations.
|
$ 13.40
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1069 sealing gasket is a tail piece gasket specified for the lower part of Vetus BOW310 and BOW28548 bow thruster assemblies and is suitable for BOW220 kgf bow thruster applications. It is supplied as a spare part for Vetus marine thruster systems to provide a secure seal in the lower section and support correct thruster operation.
|
$ 11.49
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1070 flange gasket is a sealing component specified for the flange interface on Bow220 bow thruster installations, intended to provide a secure, leak-free connection. Supplied as a spare part for Vetus marine thruster systems, it is described as durable and wear-resistant and is intended for straightforward replacement on Bow220 bow thrusters.
|
$ 13.40
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1074 flexible coupling component is intended for Vetus bow thruster systems and is specified for compatibility with the BOW22024 and BOW28548 models. It provides a flexible, durable connection between mating components to support smooth and efficient bow thruster operation and is supplied as a spare part for Vetus marine thruster installations.
|
$ 268.01
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1076B intermediate flange component is a precision-engineered connection interface for Vetus BOW thrusters from BOW220 to BOW310. It is specified as AISI12 with a black RAL9005 finish described as aluminum black, and is supplied as a spare part for Vetus marine thruster systems to provide a stable intermediate connection point in the thruster assembly.
|
$ 229.73
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1079 relay cover cap is a protective solenoid/relay cover component intended exclusively for the Vetus BOW220 bow thruster system. Supplied as a spare part for Vetus marine thruster systems, it is specified with a 300 mm tube and is used to safeguard the relay against environmental exposure and damage.
|
$ 13.40
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1085 sealing ring is an O-ring specified at 44.17 x 1.78mm for tailpieces sized 50/80 in Vetus marine thruster systems. Manufactured from high-quality rubber, it is intended to provide a secure seal to prevent leakage and maintain efficient operation, with stated resistance to water, oils, and fuels.
|
$ 3.83
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1119 nylon spacer fitting is a bow thruster sealing component intended to provide a watertight connection in Vetus thruster installations. Manufactured from nylon, it is specified for use with BOW60, BOW75, BOW80, and BOW95 bow thruster models and is supplied as a spare part for Vetus marine thruster systems.
|
$ 9.58
-
+
| ||
|
1-2 weeks delivery time The Vetus BP112 strip set is a collection of multiple precision-crafted strips intended for marine and boating applications, including sealing, insulation, and reinforcement tasks. Supplied as a spare part for Vetus marine thruster systems, this set is specified as durable and designed to support installations and repairs where strip materials are required.
|
$ 7.66
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1125 mounting material kit is an all-inclusive installation hardware set for the BOW 55 kgf bow thruster, specified for both 12V and 24V electrical systems. It is supplied as a spare-part set for Vetus marine thruster installations and includes mounting brackets, fasteners, and installation hardware to support secure thruster mounting.
|
$ 23.93
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1129 drive pin set is a replacement pin kit for Vetus bow thruster systems, specified for BOW35 and BOW55 units rated at 35 kgf and 55 kgf. The set contains 5 drive pins with a stated size of 5 x 45.5 mm for thruster servicing and maintenance within Vetus marine thruster installations.
|
$ 34.37
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1130 shear-pin set is a replacement fastener set for Vetus BOW5512/24A bow thruster installations rated at 55 Kgf, configured with a solid tunnel flange and two hex bolt motor attachment. Supplied as a set of 5 shear pins, each pin measures 25.6 mm x 4 mm and is intended to protect the thruster motor by shearing under excessive load in the drive system.
|
$ 45.62
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1138 mounting and installation kit set is intended for the Bow 35 KGF thruster (12V) and is supplied as an installation material package for Vetus marine thruster systems. The kit includes a holder with cover, a main 160 A slow-blow fuse, and an operation manual providing installation instructions; it is listed as New/Old Stock and sold exactly as pictured.
|
$ 28.71
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1140 isolation bolt is an insulated fastening component specified as M6 x 210 mm for the BOW 55 engine (bow propmotor 55 kgf). Intended for Vetus marine thruster system service, it functions as an insulation-related bolt to support secure operation in the designated application.
|
$ 5.27
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1148 intermediate flange component is intended for Vetus bow thruster installations and is specified for integration with BOW2512 systems. Supplied as a spare part for Vetus marine thruster systems, it supports fit-up between mating components within the bow thruster assembly.
|
$ 38.29
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1148B intermediate flange component is a replacement part intended for the BOW25 manoeuvring system. Manufactured in aluminum and specified in black (RAL9005), this intermediate flange supports correct assembly and operational reliability of the BOW25 unit within Vetus marine thruster systems.
|
$ 47.86
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1168 drive pin component is a propeller drive pin specified for the BOW2512 bow thruster, providing power transmission to the propeller for reliable thruster operation. Size is stated as D 4 x 31 mm, and it is supplied as a genuine Vetus replacement spare for Vetus marine thruster systems.
|
$ 5.80
-
+
| ||
|
1-2 weeks delivery time The Vetus BP117 flexible coupling assembly is a replacement driveline component for Vetus bow thruster systems, specified for BOW110, BOW125, BOW130, and BOW16024 units. It is used to support power transmission within the thruster system as part of maintaining overall propulsion mechanism efficiency and operational reliability.
|
$ 229.73
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1170 tailpiece sealing gasket is a replacement element for Vetus bow thruster manoeuvring systems, specified for the BOW2512 model. It functions as a sealing component for the tailpiece to ensure a tight, reliable fit and maintain the integrity of the thruster installation as part of the marine manoeuvring system.
|
$ 8.62
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1173 sleeve/disc/bolt component set is a spare parts kit for Vetus BOW80 bow thruster installations. Supplied as a set consisting of a sleeve, disc, and bolt, it provides the required hardware elements supporting smooth and reliable operation of the BOW80 thruster system.
|
$ 38.29
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.