Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus WCS001 toilet seat and cover assembly (Type WCS) is an accessory intended for marine sanitation installations and designed to complement Vetus marine toilets. Manufactured from quality materials for durability and resilience in maritime conditions, this seat-and-cover set is supplied within the spare parts range for Vetus marine waste water systems.
|
$ 172.30
-
+
| ||
|
1-2 weeks delivery time The Vetus WW03 inspection cover assembly is a replacement male threaded inspection lid with moulded thread and an O-ring, intended for service access on Vetus waste tank installations. It is specified as a spare part for Vetus WWS “ready to go” waste tanks, WW60 and WW80 bulkhead mounted waste tanks, and the BTANK#C waste tank range to support inspection and maintenance activities.
|
$ 30.44
-
+
| ||
|
1-2 weeks delivery time The Vetus WW06 Skintop cable gland is a threaded cable entry component with M20 x 1.5 thread form, intended to provide a secure pass-through and sealing interface for cables. It is specified to seal against environmental ingress such as dust and water and is listed as a spare part for Vetus marine waste water systems, including FTANK and WTANK applications.
|
$ 16.09
-
+
| ||
|
1-2 weeks delivery time The Vetus WW07 counter nut set is manufactured from nickel-plated brass and intended for use with pipe/cable glands, matching the M20x1.5 thread used on the Vetus WW06 cable gland. These nuts provide a secure, tight retention point for cable entries and are listed as spare parts for Vetus marine waste water systems, including FTANK and WTANK installations.
|
$ 7.56
-
+
| ||
|
1-2 weeks delivery time The Vetus WW09 tank inspection cover assembly is specified for tanks with a moulded thread to S8-01 and provides an access point for inspection, maintenance, and cleaning. It is described as a durable, tightly securing cover intended to help prevent leaks or spills and is supplied as a spare part for Vetus marine waste water systems.
|
$ 13.21
-
+
| ||
|
1-2 weeks delivery time The Vetus BP05 gasket element is a 2 mm-thick sealing component supplied for Vetus marine thruster system applications, specified for BOW5012 and BOW5024. It is intended to provide a reliable seal and protection against leaks where fitted within the relevant thruster equipment.
|
$ 4.89
-
+
| ||
|
1-2 weeks delivery time The Vetus BP051 gasket component is a 1 mm thick sealing element intended for bow thruster and other marine sealing applications. It is specified as a spare part for Vetus marine thruster systems and is used to help prevent leaks by providing a tight sealing interface.
|
$ 4.15
-
+
| ||
|
1-2 weeks delivery time The Vetus BP09 bearing component is an SKF16002 ball-bearing specified for bow-propeller (bow thruster) applications in Vetus marine thruster systems. This precision-engineered spare part is intended to support smooth operation within the bow-propeller propulsion arrangement and is supplied under the Vetus BP09 designation.
|
$ 22.97
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1002 tail piece cap component is a replacement cap for the BP1103 tail piece used on Vetus BOW3512, BOW5512, and BOW5524 bow thrusters. It is described as a durable construction intended to provide a secure fit and protective coverage for the tail piece, with an installation designed to integrate easily into the existing bow thruster system.
|
$ 28.71
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1010SET brush-and-spring service kit supplies replacement brushes and springs intended for BP1010 applications and referenced for BOW220. The kit is used to maintain electrical conductivity and reliable contact as part of Vetus marine thruster system maintenance.
|
$ 354.16
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1012 sealing spacer / nylon filler plate is a bow thruster sealing component intended to enhance sealing capability on Vetus BOW thruster installations. It is specified as compatible with BOW35, BOW45, BOW55, BOW55A, and BOW55HM models and is supplied as a spare part for Vetus marine thruster systems.
|
$ 13.88
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1022 aluminum intermediate flange assembly is a purpose-built connection component intended exclusively for the Vetus BOW55 bow thruster. Supplied as a spare part for Vetus marine thruster systems, it is specified as an aluminum flange used to establish a secure and reliable connection within the bow thruster installation.
|
$ 57.44
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1023 shear-pin coupling assembly is a steel safety pin coupling engineered to secure the connection between the motor and tailpiece on the BOW55 bow thruster. Supplied as a spare part for Vetus marine thruster systems, it is specified as a robust steel coupling intended to support system integrity and safety in maritime applications.
|
$ 33.51
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1025 stainless steel snap ring is a fastening component used to securely retain parts in place in marine applications, specified as a spare part for Vetus marine thruster systems. It is manufactured from stainless steel for corrosion resistance in marine environments and is intended to be easy to install and remove during service and maintenance.
|
$ 3.83
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1030 floating fuse-holder assembly is supplied with a 5A glass fuse and is intended to safeguard onboard electrical circuits. Its floating design is specified to maintain visibility and accessibility in marine conditions, and it is listed under spare parts for Vetus marine thruster systems.
|
$ 9.58
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1034B intermediate flange component is an aluminium (Alu) flange intended for tunnel mounting in BOW35 thruster installations, specified for use with the BOW3512. It is supplied with a black RAL9005 finish and is categorized as a spare part for Vetus marine thruster systems.
|
$ 38.29
-
+
| ||
|
1-2 weeks delivery time The Vetus BP10361 adapter bus accessory (also referenced as an adaptor sleeve) is designed for Vetus BOW25DI marine equipment to support compatibility and connectivity. Supplied as a spare part for Vetus marine thruster systems, it is intended to provide seamless integration and is described as straightforward to install for quick integration with existing equipment.
|
$ 40.21
-
+
| ||
|
1-2 weeks delivery time The Vetus BP105 front foil panel sticker is a designated marking and appearance panel decal for bow propeller installations, specified for the front foil panel (panbs3). Identified as model BP105, it is described as durable and visible and is supplied as a spare part for Vetus marine thruster systems.
|
$ 28.71
-
+
| ||
|
1-2 weeks delivery time The Vetus BP1055 V30-A V-ring sealing component is a rubber seal specified for the outgoing shaft tailpiece and supplied as a spare part for Vetus marine thruster systems. Identified as type V-ring V30-A and manufactured from high-quality rubber, it is intended to provide sealing to prevent water ingress and protect associated mechanical systems, with application references including SET0171, BOW220, and BOW230HM.
|
$ 12.92
-
+
| ||
|
1-2 weeks delivery time The Vetus BP105O frontfoil panel assembly is a bow thruster system component for Bowprop 2 (PANBS2) installations. Identified by product code BP105O, it is intended to support precise control and maneuverability of the vessel when operating the bow thruster system and is supplied as a spare part for Vetus marine thruster systems.
|
$ 23.93
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.