Vetus parts offer high-quality components designed for marine applications, including engine systems, bow thrusters, and water systems. Vetus bow thrusters provide enhanced maneuverability for vessels, making it easier to steer and navigate in tight spaces. These systems feature reliable propellers, control panels, and tanks, all essential for efficient operation in the engine room. Vetus replacement parts are specifically engineered for durability and performance in demanding maritime environments.
|
1-2 weeks delivery time The Vetus SETZKB205 mounting hardware kit is a complete installation set intended for secure mounting of the Filter 1900 series. Supplied as a comprehensive set of components for straightforward installation, this kit is specified as suitable for marine and industrial environments and is intended for both new installations and replacement work.
|
$ 45.85
-
+
| ||
|
1-2 weeks delivery time The Vetus WF09 sealing and cover set is a spare parts kit for the Vetus Type 150 raw water filter (FILTER150), supplied with a clear cover and both large and small O-rings to maintain a secure lid seal during operation. The set also includes a large white lid O-ring and a wing nut flat washer as listed for this kit.
|
$ 30.28
-
+
| ||
|
1-2 weeks delivery time The Vetus WF10 O-ring gasket set is a sealing component kit intended for the FILTER150 marine filtration system (waterfilter 150/325), supplied as a set of large and small O-rings (5x). It is specified for securing a proper fit to support leak prevention and maintain filtration system efficiency in Vetus water filtration installations.
|
$ 43.07
-
+
| ||
|
1-2 weeks delivery time The Vetus WF12 sieve strainer is a purpose-built filtration accessory intended for use with the Water Filter 150 (Type FTR150) in marine water systems. It is designed to filter debris and impurities from the water to support reliable operation of the onboard water filtration arrangement and is supplied as a Vetus spare part.
|
$ 16.75
-
+
| ||
|
1-2 weeks delivery time The Vetus WF14S washer set is a replacement hardware kit comprising five wing nut flat washers intended for the Vetus Type 150 raw water filter (water strainer). Supplied as a set for routine maintenance, it supports continued serviceability of the filter assembly as part of Vetus spare parts.
|
$ 22.01
-
+
| ||
|
1-2 weeks delivery time The Vetus WF25 cover component is a protective and containment cover engineered for the Vetus FTR525 water strainer in marine applications. It shields the FTR525 water strainer to support efficient operation and is supplied as a Vetus spare part accessory intended to help extend strainer service life.
|
$ 52.64
-
+
| ||
|
1-2 weeks delivery time The Vetus WF27 gasket set is a sealing kit comprising an upper lid seal and a lower gasket for the Vetus Filter 525 stainless steel raw water filter. Supplied as spare parts for product FTR525, this set is intended to restore sealing integrity for reliable filtration in the vessel’s water system.
|
$ 29.04
-
+
| ||
|
1-2 weeks delivery time The Vetus WF525 stainless basket component is designed specifically for the FTR525 water strainer and functions as the filtration element that helps prevent debris from entering the strainer body. Manufactured from stainless steel for durability, this spare part supports efficient water filtration within the FTR525 system to help maintain strainer performance.
|
$ 172.30
-
+
| ||
|
1-2 weeks delivery time The Vetus CT50065 intermediate flange assembly is specified as an interface component for ZF63 applications on BULFL32 and is referenced as an intermediate flange for HSW630/BULFL32. It is intended to provide a precise and reliable connection when adapting, extending, or upgrading a marine propulsion system, and is listed under spare parts for Vetus stern gear systems.
|
$ 737.04
-
+
| ||
|
1-2 weeks delivery time The Vetus CT50067 adaptor/intermediate flange assembly is specified as an intermediate flange for BULFL12 applications on PRM750 and also described as an adaptor flange from Bulflex32 to gearbox PRM402. It is intended to provide a precise, reliable mechanical interface within Vetus stern gear propulsion system installations.
|
$ 363.74
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS002 silicone grease tube is a 15 gram lubricant formulated for use with ZWB and ZWBH propeller shaft bearings and seals in Vetus stern gear systems. It provides lubrication and is specified to protect against wear and corrosion to support component condition within the propulsion system.
|
$ 11.49
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS25005 outer bearing flange assembly is a bronze mounting flange with an outer bearing, specified for a 25 mm diameter, intended for stern gear systems. It is supplied as a spare part for Vetus stern gear installations where secure mounting and durable performance in marine environments are required.
|
$ 86.15
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS25009 rubber gaiter hose assembly is a replacement connection hose for the Vetus ZWB25 self aligning dual lip seal shaft bearing, specified with a 25 mm hose diameter. Supplied as a spare part for Vetus stern gear systems, it is used to provide a tight seal interface for the ZWB25 bearing installation.
|
$ 36.37
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS30005 bronze mounting flange outer bearing unit is specified with a 30 mm diameter and is intended to provide structural support within stern gear systems. Manufactured in bronze for marine service, it is described as offering high resistance to corrosion and wear in demanding operating conditions.
|
$ 90.93
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS30006 sealing ring is an O-ring specified as 48x3 mm with a shore hardness of 70 gr (Shore A), intended for use with an outer bearing 30 mm. Manufactured from high-quality elastomer, it is used to maintain leak-tight seals in marine and industrial installations, including engines, hydraulic systems, and pumps, and is listed under spare parts for Vetus stern gear systems.
|
$ 4.31
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS30009 hose component is a connection hose intended for the Vetus ZWB30 bearing, specified for D 30 mm. It is used within Vetus stern gear systems to provide a sealed hose connection supporting the integrity of the ZWB30 installation.
|
$ 40.21
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS35005 outer bearing unit is a stern gear spare part specified with a 35 mm diameter and described as a bronze mounting-flange outer bearing for marine applications. It is intended for maintenance or replacement within Vetus stern gear systems where a 35 mm outer bearing is required.
|
$ 110.08
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS35009 rubber gaiter hose is a replacement sealing hose intended for the Vetus ZWB35 self aligning dual lip seal shaft bearing (35 mm). It is used as part of the stern gear sealing arrangement to provide a secure and efficient seal for the ZWB35 system and is supplied as a spare part for Vetus stern gear systems.
|
$ 54.56
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS40005 flange-and-bearing assembly is a mounting flange fitted with a bronze outer bearing with an outer diameter of 40 mm. Intended as a spare part for Vetus stern gear systems, it provides bearing support for rotating shafts to promote smooth operation and reduced friction in marine and industrial machinery where corrosion resistance and durable construction are required.
|
$ 124.44
-
+
| ||
|
1-2 weeks delivery time The Vetus DLS40009 rubber gaiter hose is a replacement connection hose for the Vetus ZWB40 self aligning dual lip seal shaft bearing, specified for D 40mm. It is used to provide a secure sealing connection as part of Vetus stern gear system service and maintenance.
|
$ 60.30
-
+
| ||
What are the key benefits of using Vetus bow thrusters for improved vessel maneuverability?
Vetus bow thrusters significantly improve vessel maneuverability by providing precise control over the boat's movement, especially in tight spaces. Their reliable performance, supported by a wide range of Vetus marine products and spare parts, ensures that both recreational and commercial vessels can easily navigate in challenging conditions. With high-quality thruster service parts and the option to order online in our shop, Vetus makes boating more enjoyable and efficient for craft and small commercial vessels.
What types of water systems does Vetus offer for marine vessels and what benefits do they provide?
Vetus offers a range of water systems for marine vessels, including freshwater, wastewater, and bilge systems. These systems are designed to ensure reliable supply and efficient management of water on board, making boating enjoyable and trouble-free. With high-quality marine parts and innovative components, such as pumps and valves, Vetus water systems provide long-lasting performance, making them an essential part of any vessel’s infrastructure.
How do Vetus engine control panels contribute to smoother operation and maintenance in marine vessels?
Vetus engine control panels streamline the operation of marine vessels by providing clear and intuitive control over engine functions, ensuring smooth performance. These panels offer easy monitoring of critical systems, such as fuel and power levels, and are designed for efficient troubleshooting and maintenance. When combined with Vetus bow thruster propellers, they enhance maneuverability, while the well-designed hatch ensures easy access for service and upkeep.