Parker Hannifin is a renowned company specializing in a wide range of industrial and marine products. Their offerings include components and systems used in various yacht and boat applications, ensuring reliability and efficiency on board.
|
1-2 weeks delivery time The Parker H593001001A is a pH neutralizer assembly identified with a supplied 10" size. The available information does not provide confirmed neutralizing media, flow rate, connection size, housing material, treatment capacity, or specific system compatibility.
|
$ 943.91
-
+
| ||
|
1-2 weeks delivery time The Parker H611000004 is a remote LCD controller assembly supplied with a 75 ft (23 m) cable. Confirmed controls and indicators include Start and Stop switches plus Power On, System On, Safe Water, and Service System lamps.
|
$ 1,314.33
-
+
| ||
|
1-2 weeks delivery time The Parker M2131-02 is an interconnector identified for a 6" element and supplied as nylon. The available information does not provide confirmed connection geometry, dimensions beyond the 6" designation, pressure rating, temperature range, or specific system compatibility.
|
$ 506.49
-
+
| ||
|
1-2 weeks delivery time The Parker M3129 is a nylon cap identified for media filter applications. The supplied information does not provide confirmed dimensions, connection type, filter model compatibility, pressure rating, or installation specifications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Parker M4353-2 is a filter lid identified for a supplied 100 SQ FT filter designation and made from Nylon 6/6. The available information does not confirm whether 100 SQ FT is an actual filtration area or a model designation, and it does not provide dimensions, connection details, pressure rating, or specific filter compatibility.
|
$ 2,122.16
-
+
| ||
|
1-2 weeks delivery time The Parker R60T is a Racor Spin-on Series replacement element with a 10 micron Aquabloc filtration rating. It is identified for use with Racor 760R, 660R, 460R, and 360RC Series fuel filters and is intended to remove water and contaminants from fuel.
|
$ 108.23
-
+
| ||
|
1-2 weeks delivery time The Parker V107010001 is a prefilter with a 5 micron filtration rating and an included gauge assembly. The available information does not provide confirmed flow rate, pressure range, connection sizes, filter dimensions, housing material, or specific system compatibility.
|
$ 730.42
-
+
| ||
|
1-2 weeks delivery time The Parker VMS-3-220V is a Village Marine ultraviolet germicidal system for post-filtration water treatment. It is rated for a maximum flow of 3 GPM, operates on 220V at 16W including ballast loss, and uses a stainless steel housing, high-purity quartz flow tube, and UV-C lamp.
|
$ 3,118.41
-
+
| ||
|
1-2 weeks delivery time The Parker 33-0058 is a Village Marine OEM sediment filter with a 20 micron filtration rating and approximately 35 sq ft of filtration media. It measures 4.5" in diameter and 19.75" in length and is designed for 20" Big Blue filter housings, including pre-treatment applications for reverse osmosis systems and Village Marine Bilgewater Membrane Separator systems.
|
$ 219.32
-
+
| ||
|
1-2 weeks delivery time The Parker FILTERELEMENT is a Racor FBO-10 replacement cartridge identified as cartridge code C10/10. It is a 10 micron water separator element for diesel, kerosene, and gas applications, with an outside diameter of 6" (15.2 cm) and a supplied height of 10" (25.4 cm).
|
$ 525.41
-
+
| ||
|
1-2 weeks delivery time The Parker 2040V10 is a Racor V Series 10 micron replacement cartridge for 900FV, 1000FV, 900VMA, and 1000VMA assemblies. It uses Aquabloc Synergy media, includes a lid gasket and T-handle O-ring, and is backward compatible with previous Racor Turbine housing models, including marine versions.
|
$ 37.88
-
+
| ||
|
1-2 weeks delivery time The Parker 690R30MTC is a Racor Spin-on Series fuel filter/water separator with a 30 micron rating, a maximum flow rate of 90 GPH (341 LPH), and M16 × 1.5 SAE ports. It is supplied with a standard clear engineering plastic bowl, no heater, and no primer pump.
|
$ 529.67
-
+
| ||
|
1-2 weeks delivery time The Parker 6120R30 is a Racor Spin-On Series fuel filter/water separator for diesel and gasoline with a 30 micron element configuration. Supplied technical data includes a 3/8"-18 NPTF port size, 15 psi maximum operating pressure, 190°F (88°C) maximum fluid temperature, and compatibility with R120S, R120T, and R120P replacement elements.
|
$ 547.17
-
+
| ||
|
1-2 weeks delivery time The Parker 6120R30MTC is a Racor Diesel Spin-on 600 Metric fuel filter/water separator with a 30 micron rating, a flow rate of 120 GPH (454 LPH), and M16 × 1.5 SAE ports. It is supplied with a deep clear engineering plastic bowl and without a heater or integral primer pump.
|
$ 547.17
-
+
| ||
|
1-2 weeks delivery time The Parker R260T is a spin-on replacement filter element with a supplied 10 micron filtration rating. The available information does not provide confirmed compatible housing models, flow rate, dimensions, thread size, media type, or specific fuel-system compatibility.
|
$ 110.04
-
+
| ||
|
1-2 weeks delivery time The Parker RK22610 is a Racor replacement element kit for 812 / 7812 applications. Each kit contains one 8021 filter element, one 8022 filter element, and one lid gasket; two kits are required for 75812MA and three kits for 79812MA.
|
$ 649.09
-
+
| ||
|
1-2 weeks delivery time The Parker 49261000 is a Racor T-512 Dynacell replacement element. The available information does not provide confirmed filtration rating, dimensions, flow capacity, media specification, fluid compatibility, or specific housing compatibility.
|
$ 496.25
-
+
| ||
|
1-2 weeks delivery time The Parker 1000VMAM10 is a Racor Turbine fuel filter/water separator assembly with an all-metal bowl and a 10 micron service filter. The unit features Aquabloc Synergy media, an integrated shut-off valve, an integrated vacuum port, two inlet and two outlet ports, and a top-load drop-in filter design.
|
$ 1,531.12
-
+
| ||
|
1-2 weeks delivery time The Parker 1000VMA10 is a Racor marine Turbine fuel filter/water separator assembly with a 10 micron service filter and heat deflector. It features Aquabloc Synergy media, an integrated shut-off valve, an integrated vacuum port, and two inlet and two outlet ports.
|
$ 1,371.19
-
+
| ||
|
1-2 weeks delivery time The Parker 500MAM10 is a Racor marine fuel filter/water separator assembly. The available information does not provide confirmed micron rating, flow rate, port size, bowl type, filter media, dimensions, or specific engine compatibility.
|
$ 1,237.98
-
+
| ||
How does Parker's hydraulic control system improve the performance of a boat's transmission?
Parker's hydraulic control system significantly improves the performance of a boat's transmission by providing precision-engineered solutions that enhance motion and control. The system includes high-quality valves and actuators that ensure efficient and responsive transmission operations, leading to smoother speed adjustments and better overall output. With Parker's comprehensive customer support and access to a wide variety of applications, boat owners can rely on superior service and expert advice to maintain optimal performance and reliability.
How do Parker hydraulic filters enhance the performance of a boat's hydraulic system?
Parker hydraulic filters enhance the performance of a boat's hydraulic system by providing superior protection against contaminants, ensuring clean oil and efficient operation. These filters, designed by Parker hydraulics, help maintain the quality and performance of the system, reducing wear and tear on components and extending the lifespan of the hydraulic drive systems. For more information on the selection and mounting of these filters, please contact us or visit our site for a complete inventory and expert support.
How do Parker Hannifin fittings support various hydraulic applications today?
Parker Hannifin fittings support various hydraulic applications by ensuring reliable connections and optimal performance in both mobile and industrial settings. With a comprehensive selection available, these fittings are designed to handle everything from air and fluid systems to hydrostatic transmissions, catering to the diverse needs of the market. If you have any questions or need further assistance, please contact us for more information.
How do Parker parts integrate with other components in a marine power drive system?
Parker parts integrate seamlessly with other components in a marine power drive system by offering a comprehensive range of fittings, tubing, and accessories designed for optimal compatibility and performance. By sourcing components from Parker NA, businesses can ensure reliable and efficient operation of their marine systems.