Parker Hannifin is a renowned company specializing in a wide range of industrial and marine products. Their offerings include components and systems used in various yacht and boat applications, ensuring reliability and efficiency on board.
|
1-2 weeks delivery time The Parker B675800003 is a maintenance kit identified for the supplied CPFE 32.5 AW designation. The available information does not define this designation or provide confirmed kit contents, component quantities, filter ratings, materials, service interval, or detailed system compatibility.
|
$ 1,797.79
-
+
| ||
|
1-2 weeks delivery time The Parker BD7029 is a Baldwin spin-on lube filter intended for engine lubrication systems. The supplied information identifies it as an oil filtration component but does not provide confirmed micron rating, flow capacity, thread size, dimensions, bypass setting, or specific engine compatibility.
|
$ 33.88
-
+
| ||
|
1-2 weeks delivery time The Parker CMF2000 Marine Tec CMF Media Filtration System is designed for pre-filtration ahead of the micron filtration stage in reverse osmosis systems used in marine applications. Supplied specifications include a maximum flow range of 3–8 GPM (700–1800 LPH), weight of 50–90 lb (23–41 kg), and configuration-dependent dimensions.
|
$ 8,413.43
-
+
| ||
|
1-2 weeks delivery time The Parker H17835601A is an end plug with a through-hole design, identified by the supplied All Sys designation. The available information does not define the scope of All Sys or provide confirmed dimensions, material, thread or connection type, pressure rating, or specific system compatibility.
|
$ 334.86
-
+
| ||
|
1-2 weeks delivery time The Parker H17835602A is an inlet end plug. The supplied information does not provide confirmed dimensions, material, connection or thread type, pressure rating, or specific system compatibility.
|
$ 598.58
-
+
| ||
|
1-2 weeks delivery time The Parker H2008210001 is a Seafari plankton filter assembly designed to trap suspended solids larger than 100 microns before subsequent filtration stages. It uses a cleanable ultra-fine Monel mesh screen to remove suspended solids and biological growth such as plankton, and is recommended for harbor, shallow-water, fishing-ground, and other high-plankton operating areas.
|
$ 1,381.32
-
+
| ||
|
1-2 weeks delivery time The Parker H2156210002M is an HPP/motor assembly rated at 2.5 HP for 50/60 Hz, single-phase operation, with a supplied flow rate of 4.2 GPM. The final M designation is not defined in the supplied information.
|
$ 7,325.12
-
+
| ||
|
1-2 weeks delivery time The Parker H22502210001 is a complete control manifold assembly for Horizon HRO Seafari modular and self-contained watermakers rated 450–1800 GPD, manufactured from 2008 to 2014 before the Versatile series. The assembly includes gauges, a pressure switch, and a salinity probe.
|
$ 9,501.70
-
+
| ||
|
1-2 weeks delivery time The Parker H22502210003 is a control manifold assembly identified by the supplied Versatile designation. The available information does not provide confirmed included components, pressure range, sensor configuration, connection details, materials, or detailed system compatibility.
|
$ 9,438.90
-
+
| ||
|
1-2 weeks delivery time The Parker H22502210004 is an HRO control manifold assembly supplied with a transducer. The available information confirms the presence of the transducer but does not provide its measurement range, signal type, pressure rating, connection details, included manifold components, or detailed system compatibility.
|
$ 9,564.49
-
+
| ||
|
1-2 weeks delivery time The Parker H2521210001 is an activated carbon filter assembly with a supplied 3/8" configuration. It is used on the product-water side to remove chlorine, taste, odors, and chemical impurities, and is compatible with multiple Parker watermaker families including AquaMatic, Aqua Whisper, H2O ECO, LTM, PW, LWM, PRO mini, Aqua DUO, Coral Sea, Tasman Sea, Atlantic Sea, and North Sea.
|
$ 768.32
-
+
| ||
|
1-2 weeks delivery time The Parker H2600210003 is a main power enclosure identified for single-phase electrical systems. The available information does not provide confirmed voltage, current rating, enclosure dimensions, protection class, internal components, terminal configuration, or specific system compatibility.
|
$ 6,446.05
-
+
| ||
|
1-2 weeks delivery time The Parker H2606210005 is an HRO remote control assembly identified for the supplied SF/SE/170SF designation. Confirmed controls and indicators include Start and Stop switches plus Power On, System On, Safe Water, and Service System lamps; supplied sources conflict on cable length, listing both 75 ft (23 m) and 50 ft.
|
$ 1,377.12
-
+
| ||
|
1-2 weeks delivery time The Parker H30612730006 is a stainless steel insert with the supplied thread designation #8-32 × 5/16"-18. The available information does not provide confirmed insert type, overall dimensions, installation method, grade of stainless steel, or specific application compatibility.
|
$ 34.53
-
+
| ||
|
1-2 weeks delivery time The Parker H33260210200 is a gauge block identified by the supplied HP designation. The available information does not provide confirmed gauge compatibility, pressure range, port size, thread type, material, dimensions, or specific system application.
|
$ 937.64
-
+
| ||
|
1-2 weeks delivery time The Parker H33260210201 is a gauge block identified by the supplied HP R/M designation. The available information does not define R/M or provide confirmed pressure range, gauge compatibility, port size, thread type, material, dimensions, or specific system application.
|
$ 3,453.30
-
+
| ||
|
1-2 weeks delivery time The Parker H36160522400 is a plug end identified for the supplied Dual Seafari designation with a 3" size. The available information does not provide confirmed material, connection type, pressure rating, dimensions beyond the supplied 3" size, or detailed system compatibility.
|
$ 1,002.54
-
+
| ||
|
1-2 weeks delivery time The Parker H36160532401 is a plug end featuring a through-hole design. The available information does not provide confirmed dimensions, material, connection type, pressure rating, installation method, or specific system compatibility.
|
$ 784.85
-
+
| ||
|
1-2 weeks delivery time The Parker H41949002A is a membrane cleaning product identified by the supplied CC2 ACID ASS designation. The available information supports its use for membrane cleaning, but does not provide confirmed chemical composition, concentration, dosage, package size, cleaning procedure, membrane compatibility, or safety specifications.
|
$ 195.70
-
+
| ||
|
1-2 weeks delivery time The Parker H41949003A is a membrane cleaning kit identified by the supplied CC1&2 Assy designation. The available information supports its use for membrane cleaning, but does not provide a confirmed list of included components, chemical composition, dosage, package size, cleaning procedure, membrane compatibility, or safety specifications.
|
$ 410.20
-
+
| ||
How does Parker's hydraulic control system improve the performance of a boat's transmission?
Parker's hydraulic control system significantly improves the performance of a boat's transmission by providing precision-engineered solutions that enhance motion and control. The system includes high-quality valves and actuators that ensure efficient and responsive transmission operations, leading to smoother speed adjustments and better overall output. With Parker's comprehensive customer support and access to a wide variety of applications, boat owners can rely on superior service and expert advice to maintain optimal performance and reliability.
How do Parker hydraulic filters enhance the performance of a boat's hydraulic system?
Parker hydraulic filters enhance the performance of a boat's hydraulic system by providing superior protection against contaminants, ensuring clean oil and efficient operation. These filters, designed by Parker hydraulics, help maintain the quality and performance of the system, reducing wear and tear on components and extending the lifespan of the hydraulic drive systems. For more information on the selection and mounting of these filters, please contact us or visit our site for a complete inventory and expert support.
How do Parker Hannifin fittings support various hydraulic applications today?
Parker Hannifin fittings support various hydraulic applications by ensuring reliable connections and optimal performance in both mobile and industrial settings. With a comprehensive selection available, these fittings are designed to handle everything from air and fluid systems to hydrostatic transmissions, catering to the diverse needs of the market. If you have any questions or need further assistance, please contact us for more information.
How do Parker parts integrate with other components in a marine power drive system?
Parker parts integrate seamlessly with other components in a marine power drive system by offering a comprehensive range of fittings, tubing, and accessories designed for optimal compatibility and performance. By sourcing components from Parker NA, businesses can ensure reliable and efficient operation of their marine systems.