ID
1075947
$ 876.88
1-2 weeks delivery time
-
+
The Jabsco 52580-2001 bronze pump assembly is a self-priming, foot-mounted flexible impeller pump built for marine and industrial pumping duties, including engine cooling, circulation, and fluid transfer. Its 80-size design combines a bronze body with 25 mm (1 inch) BSP threaded ports for straightforward system integration, while the mechanical shaft seal and included neoprene impeller support reliable operation. With a nominal output of 80 litres/min (17.8 gallons/min) at 1500 rpm, this bare-shaft pedestal pump end is designed for commercial-duty service and easy maintenance with ordinary hand tools.
- Description
- Ask a Question
-
Jabsco 52580-2001 Bronze Self-Priming Pump With 1 Inch BSP Ports
The Jabsco 52580-2001 is a size 80, foot-mounted bronze flexible impeller pump designed for demanding marine and industrial pumping tasks. Supplied as a bare-shaft pedestal pump end only (without a motor), it is intended for easy integration into a wide range of installations using its BSP threaded connections and commercial-duty construction.
Application
- Engine cooling
- Washdown
- Circulation
- Bilge pumping
- Deck flooding
- Ballast transfer
- General purpose pumping
- Fire fighting
- Sump drainage
- Cellar drainage
- Emergency pumping
- Waste water removal
- Shallow well pumping
- Ditch drainage
- Circulation and transfer of water
Technical Specifications
Brand Jabsco Catalog Number 52580-2001 Pump Type Flexible impeller pump (bare-shaft pedestal pump end only, without a motor) Size 80 (BG 080) Mounting Type Foot mounting Body Material Bronze Impeller Material Neoprene (included) Shaft Seal Mechanical seal (carbon/ceramic) Connections 25 mm (1 inch) BSP threaded ports Connection (Stated) 1 inch BSP Nominal Flow Rate 80 litres/min (17.8 gallons/min) at 1500 rpm Flow (Stated) 17.8 GPM at 10 foot head and 1500 rpm Self-Priming Self-priming up to 15 feet vertical lift Vertical Dry Suction Lift (Stated) 10 feet; minimum 800 rpm required Suction Lift When Wetted (Stated) Up to 22 feet (6.7 m) Impeller Temperature Limits (Neoprene) 45°F to 180°F (7°C to 82°C) Shaft Diameter (Stated) 16 mm Drive / Shaft End Key drive Drive Details (Stated) 16 mm / 18 mm, key 5.1 mm Impeller Hub Spline drive Shipping Weight 4.20 kg Product Portfolio (Stated) Impeller pumps; cooling water pumps
Product Details
- Port configuration: BSP threaded ports are designed for easy connection into existing pipework and fittings.
- Priming and installation flexibility: Primes at low or high speeds and may be mounted in any position (stated).
- Bidirectional operation: Can pump in either direction; shaft rotation determines intake and discharge port location (stated).
- Maintenance: Designed to be maintained using ordinary hand tools (stated).
- Operating note: Do not run dry for more than 30 seconds; lack of liquid can damage the impeller and pump components (stated).
Features
- Self-priming size 80 engine cooling pump (stated)
- Foot-mounted bronze body
- Neoprene impeller included
- Mechanical shaft seal
- Handles hard and soft solids without clogging (stated)
- Will tolerate abrasive wear (stated)
- Will not airlock (stated)
- Easy to service and maintain (stated)
-
Popular products
-
1-2 weeks delivery time$ 876.88 -
1-2 weeks delivery time$ 1,116.07 -
1-2 weeks delivery time$ 1,116.07 -
-
1-2 weeks delivery time$ 2,462.79 -
1-2 weeks delivery time$ 2,027.89 -
1-2 weeks delivery time$ 1,654.04 -
1-2 weeks delivery time$ 2,108.31 -
-
