ID
1127063
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Jabsco 37245-0092 Quiet Flush electric toilet is a compact 12-volt DC marine sanitation unit engineered for quiet operation and efficient flushing with either salt or fresh water. It uses a low-noise waste discharge pump and includes a PAR-MAX 4 flush pump for remote mounting to supply rinse water, with 19 mm inlet and 25 mm discharge hose connections. User-friendly controls support both simple single-button flushing and independent control of rinse and discharge to adjust bowl water level and help minimize water use. It can be installed up to 1 meter below the waterline and specifies a 25 amp fuse, with toilet dimensions of 350 mm high x 350 mm wide x 450 mm deep and an approximate weight of 15.50 kg.
- Description
- Ask a Question
-
Jabsco 37245-0092 Quiet Flush 12 Volt Electric Marine Toilet
The Jabsco 37245-0092 Quiet Flush electric toilet is a compact bowl sanitation solution built for marine, sea, and river use. Designed to deliver a very quiet flush cycle while giving the user control over bowl water level, it supports both saltwater and freshwater flushing and includes dedicated pumping equipment for reliable rinse water delivery.
Application
- Marine toilet for sea and river use
- Flush compatibility: salt water and fresh water
- Rinse water supply can be sea water or lake water (via included pump)
- Mounting: can be installed up to 1 meter below the waterline
- Status: not available anymore
- Alternate to Jabsco 37245-3092
Technical Specifications
Brand Jabsco Catalog Number 37245-0092 Voltage 12 Volt DC Motor 12 Volt DC EMC Motor Bowl Size Compact Flush Volume 1–2 Quarts per Flush Inlet Connection 19 mm (3/4 in) bore inlet hose Discharge Connection 25 mm (1 in) bore discharge hose Fuse Size 25 Amp Toilet Dimensions 350 mm High x 350 mm Wide x 450 mm Deep Product Weight (Approx.) 15.50 kg Packed Weight (Approx.) 17.50 kg Shipping Weight 16.40 kg Packaged Dimensions 45.00 cm (L) x 43.00 cm (H) x 57.00 cm (W)
Product Details
- Included: PAR-MAX 4 self-priming flush pump for remote mounting to provide rinse water to the toilet bowl
- Discharge System: low-noise waste discharge pump with high-capacity waste macerator and bowl discharge pump
- Control: single large push-button switch for simple flush mode (activates rinse supply and macerator discharge pump simultaneously)
- Control: additional rocker switch for independent control of rinse water supply and discharge pump to raise or lower bowl water level
- Water Management: supports minimizing water use and enables complete evacuation of bowl water while underway in rough sea conditions
- Installation Note: the rinse water pump may be located above the vessel waterline because it is self-priming
- Installation Note: install a Pumpgard strainer in the inlet plumbing to the pump
- Installation Note: multifunction flush control should be mounted on a bulkhead location convenient to the toilet with access for wiring to the power source and to both pumps
- Spare Parts: available
- Category Reference: Toilet diaphragm pumps
Features
- Very quiet flush cycle
- Single-button flush actuator with dual-function water level control switch
- Compatible with both salt and fresh water flushes
- Supplied with PAR-MAX 4 self-priming pump for sea water or lake water rinse supply
- Baked enamel seat and cover
- High-capacity waste macerator and bowl discharge pump
-
Popular products
-
-
-
1-2 weeks delivery time -
-
-
-
-
-
-
