ID
1127871
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Jabsco 31600-0292 Par Max 3 automatic diaphragm pump delivers pressure-controlled water flow for boats and RVs using a 12V DC motor. Its multi-diaphragm design is self-priming (listed as up to 1.5 m vertical lift and also as 10 ft) and can run dry without damage, while a pressure switch (10 psi cut-in) helps maintain smooth, consistent flow to multiple outlets. Supplied with snap-in ports, it supports 13 mm (1/2 in) hose connections and Hep20 push-fit connectors, and includes thermal overload protection for safer operation in demanding installations.
- Description
- Ask a Question
-
Jabsco 31600-0292 Par Max 3 Automatic Water Pressure Pump
The Jabsco Par Max 3 is a pressure-controlled water system pump built for self-contained boats and RVs with multiple fixture water systems. It operates automatically: opening a fixture starts the pump to deliver a smooth, constant flow from tank to faucet, and closing the fixture stops the pump.
Application
- Boats
- RVs
- Multiple-outlet water systems (serves 3 or more outlets as stated)
Note: This part number is stated as no longer available. An alternative part number is listed as Jabsco 82400-0392.
Technical Specifications
Brand Jabsco Catalog / Part Number 31600-0292 Voltage 12 Volt DC Pump Type Diaphragm pump (multi-diaphragm; also described as four piston diaphragm pump) Self-Priming Up to 1.5 m vertical lift (also listed as self-priming to 10 ft) Run-Dry Capability Runs dry without damage Flow Rate 13 litres/minute (2.9 gallons/minute) (also listed as 13.2 LPM and 3.5 GPM) Pressure Switch (Cut-In) 10 psi (0.7 bar) Pressure Switch (Cut-Out) 25 psi (1.7 bar) (also listed as 20 psi) Port Size / Connections 1/2 inch (13 mm) hose barb or thread; suitable for 13 mm (1/2 in) bore hose or Hep20 push-fit connectors; supplied with snap-in ports Fuse Size 10 amp Dimensions (L x W x H) 220 mm x 105 mm x 100 mm Weight Packaged weight: 2.47 kg (also stated as approximately 2.97 kg packed)
Product Details
- Construction: Polypropylene
- Diaphragm: Santoprene
- Check valves: EPDM
- Motor type: Permanent magnet
- Motor protection: Automatic thermal overload cut-out
- Mounting guidance (stated): For vertical mounting, place the motor on top to help prevent water dripping on the motor if a leak occurs
Features
- Pressure-controlled operation for smooth, constant flow
- Self-priming design for flexible installation above or below the fresh water tank (in a dry location as stated)
- Can run dry without causing damage
- Quiet operation (stated)
- Snap-in ports for convenient connection
- Meets USCG Regulation 183.410 and EN ISO 8846 Marine
- Meets EN 50081-1 electromagnetic compatibility
Important Note
- Do not pump gasoline, solvents, thinners, or other flammable liquids.
-
Popular products
