ID
1323258
1-2 weeks delivery time
Our managers will contact you and clarify the terms of the order
The Jabsco 23870-1200 self-priming diesel transfer pump delivers light-duty refuelling performance with up to 35 litres per minute capacity on 12V DC power. Its aluminium body with a cast iron pump head supports reliable operation in harsh conditions, self-priming up to 2.8 meters and handling up to 6 meters maximum head. Supplied with a fused switch and hose adapters, it is designed for 19 mm (3/4 inch) bore hose connections and is suitable for diesel fuel, kerosene, paraffin, hydraulic oils, and oils up to 150 cSt viscosity.
- Description
- Ask a Question
-
Jabsco 23870-1200 Diesel Refuelling Transfer Pump Unit
The Jabsco 23870-1200 is a self-priming sliding vane pump and motor unit built for light-duty diesel refuelling and transfer tasks. With a rugged aluminium construction and practical installation accessories, it supports dependable fuel handling in marine and equipment service environments where quick, controlled transfer is essential.
Application
- Refuelling diesel-powered vehicles with tank sizes up to 200 litres (typical)
- Marine use
- Excavators
- Cranes
- Road rollers (compactors)
- Pavers
- Agricultural machines
- Generators
- Helicopters
Compatibility
- Suitable fluids: Diesel fuel, kerosene, paraffin, hydraulic oils
- Oil viscosity: Oils up to 150 centiStokes (750 Saybolt Universal)
- Not suitable: Gasoline, solvents, thinners, or other flammable liquids (explosion hazard)
Technical Specifications
Maximum Capacity Up to 35 litres/minute Maximum Output (Alternate Listing) 35 litres per minute (7.7 gallons per minute) Flow Rate (Alternate Listing) 35 litres/minute (9.5 US gallons/minute) Voltage 12 V DC Amperage 15 A Fuse Size 20 A Self-Priming Lift Up to 2.8 m (also listed as up to 2.4 m from dry) Head Capability 3 m head (maximum recommended total head: 6 m) Temperature Range –30°C to +40°C (also listed as 22°F to 104°F) Ports / Connections Vertical 1/2 inch BSP or 19 mm (3/4 inch) ID hose; ports also listed as 3/4 inch hose adaptors Minimum Hose Requirement 19 mm (3/4 inch) bore hose Pump Dimensions (L × W × H) 180 mm × 110 mm × 140 mm Dimensions (Alternate Listing) Length 19.5 cm; width 10.3 cm (feet); height 12.7 cm (including ports) Packaged Dimensions 23.00 cm (L) × 21.00 cm (W) × 17.00 cm (H) Weight (Actual) 2.62 kg Weight (Packed) Approximately 3.12 kg Shipping Weight 4.10 kg
Product Details
- Pump type: Self-priming sliding vane pump
- Construction: Aluminium body
- Pump head: Cast iron
- Shaft seal: Nitrile lip seal
- Motor: Close coupled to a 12 V DC motor
- Protection: IP55 protected motor
- Included: Integral fused switch and hose adapters
- Duty guidance (as listed): Max 45 minutes continuous running; also listed as not continuous duty rated with duty of 25 minutes
- Product portfolio: Diesel transfer pumps
Features
- Fast refuelling performance up to 35 litres/minute
- High head capability up to 6 meters
- Self-priming lift up to 2.8 meters
- Vibration tested
- Installation accessories available (full range listed)
-
Popular products
- Similar Items
-
-
1-2 weeks delivery timeBy Request
-