The Jabsco Parts Catalog provides a comprehensive range of service parts and accessories for maintaining and repairing marine pumps and sanitation systems. It includes essential components such as macerator pumps, nitrile impellers, gaskets, and o-rings, designed for use in waste management and fluid transfer applications.
|
1-2 weeks delivery time The Jabsco 31800-7095 general purpose pump delivers dependable fluid transfer with 24V operation and a 4 gallons per minute (GPM) flow rate. Built as a Non-Self-Priming General Purpose Pump (B1N), it provides consistent performance across marine, industrial, and other application settings where reliable circulation or transfer is required.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31801-0092 diaphragm pump and motor unit delivers 12V DC fluid transfer with flow up to 15 L/min (4 GPM) for mildly aggressive chemicals. A pressure switch provides automatic control (on at 1.4 bar/20 psi, off at 2.8 bar/40 psi), while the thermal-overload protected permanent-magnet motor supports reliable operation. Self-priming performance reaches 1.5 m when dry (3 m when wet), and the pump can run dry without damage; it also handles liquid temperatures from 7°C to 54°C and viscosities up to 250 cP in a compact glass-filled polypropylene build with a Santoprene diaphragm and Viton check valves.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31801-0115 self-priming diaphragm pump unit delivers dependable 115V AC pumping for industrial and marine duties, with flow up to 12 liters per minute (3 GPM) and pressure up to 40 PSI (2.75 bar). It is designed to run dry without damage and uses a thermally overload-protected motor for continuous-duty operation. Chemical-resistant construction—glass-filled polypropylene body with a Santoprene diaphragm and Viton or EPDM valves—helps support demanding fluid handling, while snap-in port adapters, quiet 60 dB operation, and low 1.8 amp draw improve installation and long-term efficiency.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31801-1305 industrial diaphragm pump and motor assembly delivers self-priming, sealless pumping for bulk transfer and recirculation applications using 115V AC single-phase power at 60 Hz. It features glass-filled polypropylene construction with a Santoprene diaphragm and EPDM check valves, 1/2 inch hose barb ports with snap-in adapters for easier installation and service, and a built-in pressure switch that shuts the pump off automatically when the discharge valve is closed. Designed for continuous operation at 70°F (21°C) while pumping against 30 psi (2 bar), it also offers run-dry capability and thermal overload motor protection for dependable industrial duty.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31810-B001 diaphragm pump unit delivers reliable, efficient pumping with a durable diaphragm design that helps ensure smooth, consistent operation. Its 12V power supply makes it suitable for both marine and industrial use where dependable performance and long-lasting durability are required.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31810-B003 industrial diaphragm pumping unit delivers reliable 12V operation for industrial applications on a yacht. Built for durability and consistent performance in demanding environments, it supports liquid transfer and other industrial processes while handling a diverse range of fluids. With a robust design and 2.76 kg weight, it provides a dependable solution for smooth onboard operations.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31820-0494 diaphragm pump is a 24V DC industrial unit built with a Santoprene diaphragm and Viton valves to deliver up to 12 liters per minute while handling mildly aggressive chemicals. It self-primes up to 1.5 meters, supports continuous duty at 2.8 bar (40 psi) head, and includes thermal overload protection for dependable operation. Compact dimensions, a glass-filled polypropylene body, and the ability to run dry without damage help it perform reliably across 7°C to 54°C liquid temperature conditions and viscosities up to 250 cP.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31820-7014 general purpose pump delivers reliable water transfer performance with 12V operation and a 3 gallons per minute flow rate. This Non-Self-Priming B1N model is designed for straightforward system integration, making it a practical choice for water movement on boats and fluid handling in industrial applications.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31820-7016 general purpose pump (B1N) delivers reliable, efficient pumping with 12V operation and a 3 gallons per minute flow rate. As a non-self-priming design, it supports consistent performance across various applications, backed by durable construction and a versatile layout for dependable day-to-day use.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31821-0494 industrial diaphragm pump is built for 24V direct current operation and supports reliable, efficient fluid transfer in industrial processes. With a rated flow of 12 LPM and 2.8 bar pressure, it delivers performance-focused pumping in demanding environments, backed by a robust design and a 4.10 kg shipping weight.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31910-3115 side-mount hose provides a dependable 15-foot run for marine projects and industrial uses, combining durable construction with the flexibility needed for demanding environments. Its blue finish offers an attractive, easy-to-identify hose option where reliable performance is required.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 31911-0001 deck fitting is an OEM flush-mount stainless steel component built for durable, precise marine installations. Its flush mount design supports a secure, reliable connection, making it a trusted option for upgrading or replacing existing deck hardware in demanding marine environments.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 32305-0392 Par-Max 3 diaphragm pump is a pressure-controlled, self-priming washdown unit built for efficient, reliable operation in marine and industrial use. It runs on 12V power and is listed with a 3.5 bar cut-off pressure and 11 l/min output (also shown as 11.4 LPM), delivering strong washdown performance with durable construction. This model is noted as no longer available, with Jabsco 32305-5012-3A provided as the alternative.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 32600-0094 Par Max 3.5 pressure-controlled diaphragm pump delivers on-demand freshwater flow for marine and recreational systems using 24V DC power. It provides 13 liters per minute (2.9 gallons per minute) open flow and uses an integrated pressure switch (cut-in 1.4 bar/20 psi, cut-out 2.8 bar/40 psi) for consistent, automatic operation. Self-priming lift up to 1.5 m (5 ft), dry-running capability, integrated bypass, and a sealed, protected motor help reduce cycling, noise, and pulsation in demanding installations; this model is listed as no longer available and replaced by Jabsco Q402J-115S-3A.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 32600-0294 Par Max 3.5 pressure-controlled water pump delivers consistent, on-demand water management with a compact, self-priming multi-diaphragm design. It supports multiple outlets, includes snap-in ports for hose or Hep20 push-fit connectors, and protects the motor with automatic thermal overload cut-out. Designed for 24V DC operation with a 7 A fuse, it provides pressure-switch control (0.7 bar cut-in to 1.7 bar cut-out) and is supplied as a pump and motor unit with polypropylene construction, a Santoprene diaphragm, and EPDM check valves; this model is listed as no longer available and replaced by Jabsco Q402J-112S-3A.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 32600-7006 PAR-MAX 3.5 pressurized water pump delivers 13.2 L/min output at 2 bar (30 PSI) on a 12V supply, supporting consistent onboard water pressure. It lists a cut-off pressure of 1.7 bar and a shipping weight of 3.20 kg. This model is no longer available, with the closest replacements noted as Jabsco Q401J-112S-3A and Jabsco Q401J-115S-3A.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 32605-0392 Par-Max 4' washdown diaphragm pump delivers pressure-controlled, self-priming performance for demanding marine and RV washdown use. It runs on 12V power and is rated at 15.1 LPM with 4.1 bar output, combining consistent operation with durable, corrosion-resistant construction for harsh environments. This model is listed as not available anymore, with Jabsco Q401J-118N-3A noted as an alternative.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 32605-0394 Par-Max 4 washdown diaphragm pump delivers pressure-controlled, self-priming performance in a compact, corrosion-resistant design suitable for both freshwater and saltwater use. Its diaphragm system supports dry running and a sealed motor helps protect reliability in demanding marine environments. Supplied with a Pump Guard strainer, port fittings, and a trigger nozzle, it also supports 13 mm (1/2 in) and 19 mm (3/4 in) bore hoses, includes a 7 amp fuse size specification, and is listed with 220 x 110 x 112 mm dimensions and a 2.1 kg weight, with self-priming up to a 2.5 m vertical lift.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 32605-7007 ParMax washdown pump kit delivers a compact, efficient washdown solution for yachts with a 3-chamber design for improved pumping efficiency. It comes as a complete kit with a Pumpgard intake strainer, pressure nozzle, and port fittings, and uses a corrosion-resistant sealed motor built for marine conditions. ISO 8846 MARINE ignition protection support, along with a 9 amp draw at 10 psi (0.7 bar) and a recommended 12 amp fuse size, helps ensure dependable washdown performance.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Jabsco 3270-241 bronze pump is a robust 3/4 in, 40-size unit with a flange-mounted design and BSP threaded ports for versatile fluid handling. Built for reliability and durability, its bronze construction supports smooth operation and long service life in both marine and industrial applications.
|
Our managers will contact you and clarify the terms of the order
| ||
What is the primary function of a Jabsco macerator pump in marine applications?
The primary function of a Jabsco macerator pump in marine applications is to efficiently handle waste by grinding solids into a slurry for easy discharge. This is achieved using a centrifugal mechanism that ensures smooth waste removal, supported by service kits and spare parts like o-rings and clutches for maintenance. With rotating ports and robust construction, these pumps adapt to various installation needs, enhancing waste management systems on boats.
What are the key benefits of using a centrifugal pump in marine systems?
Centrifugal pumps in marine systems provide efficient and continuous fluid flow, making them ideal for applications such as cooling, bilge pumping, and waste management. Their design minimizes wear due to fewer moving parts, which reduces maintenance needs and enhances longevity. With adaptable ports and compatibility with Jabsco spare parts, they ensure reliability and ease of service in demanding marine environments.
How are the components in the Jabsco Parts Catalog categorized for different marine applications?
Components in the Jabsco Parts Catalog are categorized based on their function and compatibility with various marine systems. Sections include parts for pumps like Par-Max, waste pumps, and centrifugal pumps, as well as detailed parts diagrams to help identify service kits and accessories. The catalog ensures clarity by grouping items such as impellers, ports, and lock mechanisms for easy reference across different Jabsco products and applications.