BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 15734-18000 sealing cap is a cylinder head sealing component for BUKH S270J marine diesel engines. Installed on the cylinder head, it helps maintain a secure seal in the head assembly, supporting clean operation and dependable engine service in marine conditions.
|
$ 2.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 15734-20000 sealing cap is a dedicated sealing component used across multiple engine areas on BUKH R210J and S270J marine diesel engines. Applied on the R210J cylinder head and camshaft, and on the S270J cylinder block, it helps close off designated openings to maintain proper sealing and support clean, stable engine operation for engines from March 1, 2010 onward.
|
$ 3.45
-
+
| ||
|
1-2 weeks delivery time The Bukh 15734-25000 sealing cap is a cylinder head sealing component for BUKH R210J and S270J marine diesel engines. Designed to secure and seal the specified cylinder head cap location, it helps maintain a tight, leak-resistant closure where the cylinder head assembly requires a sealed cap interface for reliable engine operation.
|
$ 3.45
-
+
| ||
|
1-2 weeks delivery time The Bukh 15734-28000 sealing cap is a cylinder block sealing component for BUKH S270J marine diesel engines. Installed in the cylinder block assembly, it helps close off a machined opening to maintain proper sealing integrity and support clean, reliable engine operation.
|
$ 5.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 15734-30000 sealing cap is a cylinder block sealing component used on BUKH R210J and S270J marine diesel engines. Installed in the cylinder block assembly, it helps close off a machined opening to support proper sealing and dependable engine operation in marine service.
|
$ 5.47
-
+
| ||
|
1-2 weeks delivery time The Bukh 15734-35000 sealing cap is a dedicated sealing component for the cylinder block on BUKH R210J marine diesel engines. Designed to close off and seal a cylinder block port, it helps maintain proper internal sealing integrity and supports clean, reliable engine operation in marine service.
|
$ 6.86
-
+
| ||
|
1-2 weeks delivery time The Bukh 15841-4250-0 fuel leak-off pipe assembly routes injector overflow fuel in the nozzle holder and glow plug area on BUKH EPA28 and EPA36 marine engines. Supplied as an assembly pipe for the leak-off circuit, it supports clean, controlled fuel return and helps keep the injection system installation tidy and service-friendly.
|
$ 42.40
-
+
| ||
|
1-2 weeks delivery time The Bukh 15841-5135-0 mini series bleed screw is a precision fastener used on the injection pump for BUKH EPA28 and EPA36 marine diesel engines. It supports clean, controlled bleeding of trapped air during service, helping restore consistent fuel delivery and reliable starting after filter changes or fuel system work.
|
$ 50.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 15841-9665-0 injection pump gasket with washer-style sealing profile is built to restore a tight seal in the injection pump assembly on BUKH EPA28 and EPA36 marine diesel engines. It helps prevent fuel seepage at the joint, supports stable injection system operation, and is suited for clean, reliable service after maintenance or overhaul.
|
$ 9.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 15841-9666-0 copper washer gasket for the injection pump bleed point helps seal the fuel system on BUKH EPA28 and EPA36 marine diesel engines. Installed within the injection pump assembly, it supports clean, leak-free bleeding and helps maintain stable fuel delivery by securing a tight seal at the bleed fitting.
|
$ 7.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 16011-12000 steel ball is a precision ball element used within the cylinder head assembly on BUKH R210J and BUKH S270J marine diesel engines. Designed to suit OEM fit and function, it supports correct operation of cylinder head mechanisms where a hardened ball component is required for reliable, repeatable movement and sealing action.
|
$ 5.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 16030-5132-0 joint bolt is a securing fastener used in the injection pump assembly on BUKH EPA28 and EPA36 marine diesel engines. It helps keep the injection pump joint firmly clamped, supporting stable alignment and dependable fuel system operation under marine vibration and load.
|
$ 98.79
-
+
| ||
|
1-2 weeks delivery time The Bukh 16060-5101-0 injection pump assembly is built for the fuel injection system on BUKH EPA36 marine diesel engines. This complete pump unit supports accurate fuel delivery to the engine, helping maintain dependable starting, stable running, and consistent performance under varying marine loads.
|
$ 10,371.63
-
+
| ||
|
1-2 weeks delivery time The Bukh 16222-7284-0 adapter is a precision-fit connection component for the water flange and thermostat assembly on BUKH EPA36 marine engines. It supports correct coolant routing through the thermostat housing area, helping the cooling system maintain stable engine operating temperature and dependable circulation in marine service.
|
$ 46.17
-
+
| ||
|
1-2 weeks delivery time The Bukh 16222-8304-0 thermal switch assembly is a temperature-activated control component used in the water flange and thermostat assembly on BUKH EPA28 and EPA36 marine diesel engines. It helps manage temperature-dependent signaling, supporting stable cooling-system operation and dependable engine protection in marine service.
|
$ 290.38
-
+
| ||
|
1-2 weeks delivery time The Bukh 16239-7343-0 water pump gasket is a sealing element for the water pump assembly on BUKH EPA28 and EPA36 marine engines. Designed to restore a tight joint at the pump interface, it helps prevent coolant leakage and supports stable cooling-system performance, and it is also used within the optional lower gasket kit and optional gasket kit arrangements.
|
$ 44.54
-
+
| ||
|
1-2 weeks delivery time The Bukh 16241-0345-0 cylinder head fastener is designed for securing the cylinder head assembly on BUKH EPA28 and EPA36 marine diesel engines. It supports correct clamping of the head to the engine block, helping maintain a stable seal under combustion loads and thermal cycling for dependable operation underway.
|
$ 72.54
-
+
| ||
|
1-2 weeks delivery time The Bukh 16241-0421-2 oil seal is a gearbox sealing component used on BUKH EPA28 and EPA36 gear case applications, also supplied within optional gasket kit and lower gasket kit assemblies. It helps retain lubricating oil where it belongs, reducing the risk of leaks and supporting clean, reliable operation of the gear case in marine service.
|
$ 46.68
-
+
| ||
|
1-2 weeks delivery time The Bukh 16241-2131-0 piston pin is a precision engine internal component used in the piston and crankshaft assembly on BUKH EPA28 and EPA36 marine diesel engines, and it is also used in the optional EPA36 piston kit. It connects the piston to the connecting rod, supporting smooth pivoting motion and dependable power transfer through each combustion cycle.
|
$ 85.10
-
+
| ||
|
1-2 weeks delivery time The Bukh 16241-2133-0 piston pin circlip is a retaining fastener used in the piston and crankshaft assembly of BUKH EPA28 and EPA36 marine diesel engines, and it is also specified for the optional EPA36 piston kit. It secures the piston pin in position, helping maintain correct piston-to-connecting-rod alignment and supporting reliable operation under continuous marine loads.
|
$ 12.76
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.