BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 12441-05167B hex head screw is a dependable fastening component for securing the ECU and case on BUKH S270J marine diesel engines. Designed for a confident, service-friendly hold, it helps keep electronic control hardware properly mounted and protected against vibration in marine operation.
|
$ 2.89
-
+
| ||
|
1-2 weeks delivery time The Bukh 132 314 000 double-lock straight quick connector provides a secure, vibration-resistant fuel line connection for BUKH R210J and BUKH S270J marine diesel engines. Used in the fuel system—listed for the R210J fuel filter assembly and the S270J fuel circuit—this straight connector supports fast, dependable service work while helping maintain tight, leak-resistant joints underway.
|
$ 35.05
-
+
| ||
|
1-2 weeks delivery time The Bukh 132 923 000 double-lock 90° quick connector elbow provides a secure, space-saving right-angle connection in the fuel system, supporting clean and reliable hose routing. Used on the BUKH R210J fuel filter installation and within the fuel system on BUKH S270J engines, it helps maintain a dependable connection designed for marine engine service.
|
$ 35.05
-
+
| ||
|
1-2 weeks delivery time The Bukh 13271-04007K groove nut is a retaining fastener used on the glow plug assembly of BUKH R210J marine diesel engines. It helps secure the glow plug in place for dependable preheating performance, supporting easier cold starts and consistent combustion during engine warm-up.
|
$ 5.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 13385-06007K flange nut is a securing fastener used on BUKH S270J engines across the oil pan, timing chain cover, and turbocharger assemblies. Its integrated flange helps spread clamping load to support stable retention in vibrating marine engine environments, making it a dependable choice for service replacement and rebuild work.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 13386-08007K glow plug nut is a dedicated fastening component for the glow plug assembly on BUKH S270J marine diesel engines. It helps secure the glow plug connection so the starting-aid system remains stable and dependable for consistent cold starting performance.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 13396-08007B flange nut is a dedicated intake-manifold fastener for BUKH R210J marine diesel engines. Designed to hold intake manifold hardware securely under vibration and thermal cycling, it helps maintain a stable, leak-resistant air intake assembly for dependable engine performance.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 13397-12007K flanged nut is a secure, OEM-style fastener used across key BUKH engine assemblies, including the R210J ECU and case and the S270J bell housing for sterndrive as well as shaft and jet configurations. Its integrated flange helps distribute clamping load for stable retention where vibration resistance and consistent fastening are essential in marine service.
|
$ 2.89
-
+
| ||
|
1-2 weeks delivery time The Bukh 13602-04001 M4 spring washer is a locking fastener element used on BUKH S270J marine diesel engines in both the fuel system assembly and the ECU and case assembly. Its spring action helps maintain clamp load under vibration and thermal cycling, supporting secure, reliable fastening where small M4 hardware is used onboard.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 13602-05001 spring washer is an M5 locking fastener element used on BUKH R210J and S270J marine engines across the ECU and case area and the S270J fuel system. It helps maintain clamp load under vibration, supporting secure electrical/electronic housings and fuel-system fittings for dependable operation at sea.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 13602-06001 spring washer is a locking fastener element used on the main bracket of BUKH S270J marine diesel engines. Designed to help maintain clamp load under vibration, it supports secure bracket fastening and dependable alignment in typical marine engine operating conditions.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 13602-08001 spring washer is a locking fastener element used to maintain clamp load and resist loosening from vibration in key drivetrain mounting points. Suitable for BUKH R210J flywheel housing applications and for BUKH S270J bell housing and main bracket positions, it helps keep critical housing joints secure in stern drive, shaft, and jet installations.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 13602-10001 spring washer is a locking fastener element used to help maintain clamp load and resist loosening from vibration and heat cycling in key engine mounting points. Specified for BUKH R210J applications on the exhaust manifold and turbocharger, and for BUKH S270J use on the main bracket, it supports secure, stable assembly in demanding marine service.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 14303-04100 dowel pin is a precision locating component used in the cylinder head assembly on BUKH S270J marine diesel engines. It helps align the cylinder head accurately to maintain correct positioning during assembly, supporting reliable sealing and consistent engine operation in marine service.
|
$ 2.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 14303-06140 dowel pin provides precise alignment for key engine castings on BUKH R210J and S270J marine diesel engines. Used across the cylinder block, cylinder head, and oil pan assemblies, it helps maintain correct component positioning during assembly, supporting reliable sealing, consistent fit-up, and long-term service stability.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 14303-08140 dowel pin is a precision locating pin used to align key engine assemblies on BUKH R210J and S270J marine diesel engines. Installed in interfaces such as the cylinder block, cylinder head, and timing chain cover, it helps maintain accurate component positioning for dependable sealing, correct assembly alignment, and stable long-term operation.
|
$ 5.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 14303-08180 dowel pin is a precision alignment component for the cylinder block on BUKH S270J marine diesel engines. Installed to locate and register mating parts accurately, it helps maintain correct component positioning during assembly and service, supporting reliable sealing and long-term engine integrity.
|
$ 2.38
-
+
| ||
|
1-2 weeks delivery time The Bukh 14303-08240 dowel pin is a precision locating component used within the crankshaft and piston assembly on BUKH S270J marine diesel engines. It helps align mating parts during assembly, supporting correct positioning and stable operation under vibration and load in marine service.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 14331-08090 bushing is a versatile engine mounting and support component used across multiple assemblies on BUKH R210J and S270J marine diesel engines, including the cylinder block, oil pan, drive belt, and alternator. It helps maintain correct alignment, dampens vibration where fitted, and supports stable operation of connected components in the engine installation.
|
$ 2.58
-
+
| ||
|
1-2 weeks delivery time The Bukh 14331-08130 knock bush is a precision-fit bushing used in the cylinder head assembly of BUKH R210J marine diesel engines. It supports accurate alignment and secure location of mating components in the cylinder head, helping maintain reliable assembly fit and consistent service performance.
|
$ 5.18
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.