BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 008E7084 rear engine mount provides secure rear support for the marine engine installation on BUKH DV24RME, DV29RME, and DV32 engines, including applications with M 60 reversing gear mounting. Designed for the rear engine support position, it helps stabilize the powertrain, maintain alignment, and reduce unwanted movement in the engine mounting arrangement.
|
$ 322.20
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7086 rear engine mount provides secure aft support for BUKH DV24RME, DV29RME, and DV32 marine diesel installations. Used in the engine support arrangement and for mounting the M 60 reversing gear, it helps keep the powertrain properly supported and aligned to reduce vibration transfer and maintain dependable drivetrain operation onboard.
|
$ 322.20
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7310 air filter element supports clean, stable intake airflow across multiple BUKH marine diesel platforms, including DV24RME, DV32, DV36, DV48, EPA28, EPA36, and EPA48 engines. Positioned in the air intake system (and on some models serving the air inlet and turbocharger supply), it helps protect internal engine components by reducing airborne contamination before it enters the induction path.
|
$ 337.95
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7317 complete piston unit is a ready-to-install replacement component for the piston group on BUKH DV10 and DV20 marine diesel engines. Designed to restore proper compression and smooth combustion, it supports efficient power delivery and dependable operation under continuous marine load.
|
$ 890.14
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7347 diode plate is a rectifier component used in Bukh marine electrical charging circuits, helping convert alternator output into stable direct current for battery charging and onboard loads. Supplied as a dedicated diode plate unit, it supports reliable charging performance and clean electrical output in marine engine installations.
|
$ 141.38
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7523 pressure pipe screw is a fastening component used on the lubrication pump with pipes assembly for BUKH DV36 marine diesel engines. It helps secure the pressure pipe connection so the lubrication system stays tight and dependable, supporting stable oil delivery where it matters most.
|
$ 291.70
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7679 complete piston unit with pin and rings is built for the reciprocating assembly in BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed in the crankshaft and connecting rod group, it helps restore proper compression, smooth power delivery, and dependable cylinder sealing during overhaul or replacement.
|
$ 1,037.44
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7805 complete camshaft unit is built for the camshaft drive group on BUKH DV24, DV29, DV29RME, and DV32 marine diesel engines. Designed to restore accurate valve timing, it supports smooth engine operation and dependable lubrication-system integration within the camshaft, lubricating oil pump, and lubricating oil filter assembly.
|
$ 2,444.57
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7900 vacuum bleeder valve assembly helps purge trapped air and stabilize system operation on BUKH DV24RME and DV29RME marine diesel engines. Used within the governor and regulating handle assembly and also on the DV24RME camshaft area with the lubricating oil pump and oil filter group, this complete valve supports smooth regulation and dependable oil-system serviceability during maintenance.
|
$ 528.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7903 high-pressure injection line for cylinder 1 is a fuel pressure pipe used in the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports accurate, reliable delivery of pressurized fuel within the injection system, helping maintain consistent engine performance and dependable starting under marine operating conditions.
|
$ 214.54
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7904 high-pressure injection line for cylinder 2 is a fuel pressure pipe used in the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assembly group on BUKH DV24RME, DV29RME, and DV32 engines. It routes pressurized fuel to the cylinder 2 injector with an OEM-style fit, supporting consistent injection performance and dependable running under marine operating conditions.
|
$ 214.54
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E7962 bleeder valve pipe provides a secure connection for venting and bleeding through the bleeder valve on BUKH DV24RME and DV29RME engines. Used across the governor and regulating handle assembly and the camshaft, lubricating oil pump, and lubricating oil filter assembly (DV24RME), this pipe helps support clean, controlled bleeding during service and reliable system operation.
|
$ 315.80
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E8052 rotating-weight guard is a protective cover used at the crankcase and front end cover area on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps shield rotating components from accidental contact and supports a safer, more protected engine front-end installation in service.
|
$ 315.80
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E8131 rocker arm oil feed pipe supports dependable top-end lubrication on BUKH DV29RME and DV32 marine diesel engines. Installed within the camshaft and lubrication system area alongside the lubricating oil pump and oil filter, it routes engine oil to the rocker arm gear to help maintain smooth valvetrain operation and reduce wear under continuous marine running.
|
$ 159.10
-
+
| ||
|
1-2 weeks delivery time The Bukh injection pipe is intended for marine diesel fuel injection line service applications.
|
$ 240.86
-
+
| ||
|
1-2 weeks delivery time The Bukh injection pipe is designed for marine diesel injector line replacement applications.
|
$ 240.86
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E8207 sacrificial zinc anode is designed for saildrive corrosion protection on BUKH DV8SME and DV10LSME installations. Fitted to the saildrive unit, it helps shield underwater metal components by sacrificing itself first, supporting longer service life and more reliable operation in harsh seawater environments.
|
$ 78.57
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E8219 turbocharger return pipe is a formed return-line component designed for the turbocharger system on Bukh marine engines. It helps route return flow away from the turbocharger in a controlled, secure way, supporting clean installation, dependable operation, and OEM-correct fit during service replacement.
|
$ 670.17
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E8223 turbocharger lubricating pipe provides a secure oil supply line within the air inlet and turbocharger assembly for BUKH DV48 marine diesel engines. Designed as an OEM-fit replacement, it supports dependable turbocharger lubrication to help maintain smooth operation and protect critical rotating components under continuous marine loads.
|
$ 412.24
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E8413 fuel supply pipe is designed to connect the lift pump to the fuel filter on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assembly, it supports clean, steady fuel delivery to the injection system for dependable starting and smooth running.
|
$ 226.03
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.