BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 00800-BS131 power steering oil return hose is designed for the power steering system on BUKH S270J marine diesel engines, providing a secure return path for hydraulic oil back to the reservoir. Built as an OEM-fit replacement, it supports clean, dependable oil circulation and helps maintain consistent steering assist underway.
|
$ 64.17
-
+
| ||
|
1-2 weeks delivery time The Bukh 00800-BS132 power steering oil suction hose is a dedicated suction-line component for the power steering system on BUKH S270J marine engines. It helps deliver a steady supply of hydraulic oil to the power steering circuit, supporting smooth steering response and dependable operation in marine use.
|
$ 77.06
-
+
| ||
|
1-2 weeks delivery time The Bukh 008D8879 fuel pump governor arm is a regulator lever used in the governor and regulating handle system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports precise control of the fuel pump governing linkage for stable speed regulation, and it is also used within the DV24RME camshaft, lubricating oil pump, and lubricating oil filter assembly grouping.
|
$ 107.82
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E0407 front engine support console is a marine engine mounting component that stabilizes the front support point on BUKH DV24RME, DV29RME, and DV32 diesel engines. Designed to keep the engine securely supported in the bed, it helps maintain alignment and reduces unwanted movement and vibration transfer to the hull under load.
|
$ 132.76
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E0409 front engine support console secures the engine in its marine mounting arrangement as the Front Engine Support II configuration for BUKH DV24RME, DV29RME, and DV32 engines. Built to provide stable support at the forward mounting point, it helps maintain alignment and reduces unwanted movement for dependable operation underway.
|
$ 132.76
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E0451 zinc anode with screw connection is a complete sacrificial anode rod designed for the crankcase and front end cover area on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps reduce galvanic corrosion in wetted cooling passages, protecting critical engine components and supporting long-term reliability in harsh seawater operation.
|
$ 77.16
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E1589 intermediate bearing hub assembly is a complete intermediate bearing unit used within the crankshaft and bearing group on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports stable shaft alignment and smooth rotation in the engine’s lower-end assembly, helping reduce vibration and maintaining dependable operation under continuous marine loading.
|
$ 764.20
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E2347 stop solenoid mounting bracket provides a secure, correctly aligned mounting point for the stop solenoid on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Built to support reliable shutdown operation, it helps keep the solenoid stable against vibration so the fuel shutoff mechanism operates consistently when commanded.
|
$ 131.88
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E2434 return pipe is a dedicated return line for BUKH DV10 marine engines, designed to route returning fluid cleanly back into the system. Built for proper fit within the DV10 installation, it supports tidy hose routing and dependable operation in the engine’s return circuit.
|
$ 170.10
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E2435 return hose is a dedicated return-line hose for BUKH DV20 marine diesel engines, designed to route returning fluid back through the system with a secure, OEM-style fit. It supports clean, reliable plumbing in the engine installation and is ideal for maintenance replacements where dependable hose routing matters onboard.
|
$ 207.92
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E2560 dipstick kit with seal, tube, and fittings is a complete assembly for checking and maintaining correct engine oil level on BUKH marine diesel installations. Supplied as a matched set, it supports clean, accurate oil-level monitoring and helps keep the dipstick mounting point properly sealed; it replaces the earlier article number 008E2449.
|
$ 212.59
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E2780 ring terminal connector is a reliable electrical connection component for Bukh marine engine wiring and onboard electrical installations. Designed to secure a solid terminal-to-stud connection, it helps maintain dependable continuity in vibration-prone marine environments and supports clean, service-friendly electrical assembly.
|
$ 78.77
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E2922 complete stop magnet is a ready-to-install shutdown solenoid unit for BUKH DV8-32 marine diesel engines. It actuates the engine stop function for controlled shutdown, helping ensure dependable operation and straightforward service replacement, and it is listed as replacing 032D0702, 031D0702, and 612E0060.
|
$ 1,021.57
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E3025 chain-and-gearwheel shaft assembly supports the raised hand starting mechanism on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Built around a sprocket with axle design, it transmits manual starting motion through the start-drive linkage to help ensure positive engagement and dependable mechanical operation when hand starting is required.
|
$ 690.91
-
+
| ||
|
1-2 weeks delivery time The Bukh shaft with sprocket is intended for marine engine drive and mechanical transmission applications.
|
$ 1,578.50
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E3656 hose nipple with throttle is a keel-cooling connection fitting used on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed to join cooling hoses securely while incorporating a built-in flow restriction, it helps regulate coolant circulation through the keel-cooling system for stable operating temperatures and dependable onboard performance.
|
$ 152.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E4336 water pipe is a genuine-fit replacement component used to route water through the engine’s water circuit. Designed for marine-duty service, it supports stable coolant or raw-water flow between connected cooling components to help maintain dependable temperature control onboard.
|
$ 1,281.97
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E4392 water-cooled elbow hose is a cooling-system connection hose designed for 2-circuit water-cooled elbow installations. It supports secure coolant and seawater circuit routing at the elbow, helping maintain dependable flow and stable operating temperatures in marine engine service.
|
$ 171.96
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E4476 vent valve is a compact ventilation component used to release trapped air from a marine engine system, helping maintain stable flow and consistent operation. Designed as a Bukh replacement part, it supports reliable service by allowing proper venting where air pockets could otherwise affect performance.
|
$ 500.60
-
+
| ||
|
1-2 weeks delivery time The Bukh 008E4795 rear counterweight is a rotating weight component for the rear-end rotating weight and fuel lift pump assembly on BUKH DV36 and BUKH DV48 marine diesel engines. It helps balance rotating forces for smoother operation, supporting stable running and reducing vibration-related stress on connected components.
|
$ 1,372.43
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.