BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh R6162/3 cylinder head sealing gasket is designed for the cylinder head joint on BUKH G105 marine diesel engines. It helps maintain proper compression and protects the combustion chamber and coolant passages by creating a dependable seal between the cylinder head and engine block during operation.
|
$ 148.12
-
+
| ||
|
1-2 weeks delivery time The Bukh R6187/3 complete fuel valve is a replacement valve assembly for the fuel system on BUKH G105 marine engines. It helps control and shut off fuel flow as required, supporting safe operation, reliable starting, and consistent fuel delivery in marine service.
|
$ 1,503.92
-
+
| ||
|
1-2 weeks delivery time The Bukh DV24 RME marine diesel engine is designed for reliable propulsion performance in marine applications.
|
$ 32,411.20
-
+
| ||
|
1-2 weeks delivery time The Bukh S22D0188 DV29RME diesel engine package with hand start, starting pilot, and PTO is supplied with a PRM125 marine gearbox in a 3:1 ratio. Built for practical marine installations, this configuration supports straightforward manual starting capability, dependable starting assistance, and power take-off provision alongside matched reduction gearing.
|
$ 30,023.15
-
+
| ||
|
1-2 weeks delivery time The Bukh S22D0209 DV29 RME diesel engine package is a SOLAS lifeboat propulsion setup rated at 29 hp at 3600 rpm, supplied with keel cooling, an instrument panel, and a PRM125 gearbox with a 3:1 reduction. Designed as a complete marine engine configuration without manual start, it supports dependable lifeboat operation with an integrated drivetrain and operator controls.
|
$ 27,977.20
-
+
| ||
|
1-2 weeks delivery time The Bukh SOLAS kit is designed for Hyundai R210 marine engine configuration and service applications.
|
$ 2,240.01
-
+
| ||
|
1-2 weeks delivery time The Bukh SOLAS kit is intended for S270J marine engine configuration and service applications.
|
$ 2,239.65
-
+
| ||
|
1-2 weeks delivery time The Bukh cylinder block assembly is intended for marine diesel engine repair, rebuilding, and replacement applications.
|
$ 50,509.67
-
+
| ||
|
1-2 weeks delivery time The Bukh bellows clamp is designed for marine bellows and flexible connection fastening applications.
|
$ 11.11
-
+
| ||
|
1-2 weeks delivery time The Bukh clamp is intended for marine hose, pipe, or component fastening applications.
|
$ 6.33
-
+
| ||
|
1-2 weeks delivery time The Bukh sea water hose clamp is designed for marine raw water cooling hose fastening applications.
|
$ 8.02
-
+
| ||
|
1-2 weeks delivery time The Bukh air hose clamp is intended for marine diesel intake air hose fastening applications.
|
$ 8.02
-
+
| ||
|
1-2 weeks delivery time The Bukh air hose clamp is designed for marine diesel intake air hose fastening applications.
|
$ 8.50
-
+
| ||
|
1-2 weeks delivery time The Bukh clamp is designed for marine power steering reservoir tank fastening applications.
|
$ 8.70
-
+
| ||
|
1-2 weeks delivery time The Bukh cylinder head block bolt set is designed for V8 marine diesel engine assembly and service applications.
|
$ 1,022.20
-
+
| ||
|
1-2 weeks delivery time The Bukh turbocharger thermal coating is intended for V8P marine diesel turbocharger heat protection applications.
|
$ 795.14
-
+
| ||
|
1-2 weeks delivery time The Bukh V8P sea water pump impeller is designed for marine raw water cooling pump service applications.
|
$ 538
-
+
| ||
|
1-2 weeks delivery time The Bukh turbocharger outlet cone thermal coating is intended for V8P marine turbocharger heat protection applications.
|
$ 328.71
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7671 cylinder head gasket provides a dependable seal for BUKH DV24RME, DV29RME, and DV32 marine diesel engines, supporting stable compression and keeping coolant and oil passages properly separated. Installed within the crankcase and front end cover assembly grouping, it helps protect the engine from leaks and supports clean, reliable operation across the DV24 to DV32 engine range.
|
Our managers will contact you and clarify the terms of the order
| ||
|
1-2 weeks delivery time The Bukh 00112-5S104 30A relay is an electrical switching component for the wiring system on BUKH R210J and S270J marine engines. It allows a low-current control signal to safely switch higher-current loads, helping protect switches and wiring while delivering dependable operation in harsh marine engine-room conditions.
|
Our managers will contact you and clarify the terms of the order
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.