BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh complete idler wheel is intended for marine engine belt or gear drive service applications.
|
$ 373.64
-
+
| ||
|
1-2 weeks delivery time The Bukh O-ring is intended for marine engine sealing and service applications.
|
$ 17.11
-
+
| ||
|
1-2 weeks delivery time The Bukh E-2 zinc pencil anode is designed for marine engine corrosion protection applications.
|
$ 18.28
-
+
| ||
|
1-2 weeks delivery time The Bukh O-ring is designed for marine engine sealing and service applications.
|
$ 2.38
-
+
| ||
|
1-2 weeks delivery time The Bukh O-ring is designed for marine engine sealing and service applications.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh insulated assembly bolt is intended for marine engine insulated assembly fastening applications.
|
$ 38.90
-
+
| ||
|
1-2 weeks delivery time The Bukh insulated sleeve is intended for marine engine insulated assembly and electrical isolation applications.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh insulated sleeve is designed for marine engine insulated assembly and electrical isolation applications.
|
$ 1.73
-
+
| ||
|
1-2 weeks delivery time The Bukh insulated assembly bolt is designed for marine engine assembly and fastening applications.
|
$ 38.90
-
+
| ||
|
1-2 weeks delivery time The Bukh MACH C40 control cable is a C40-series push-pull cable for jet drive control systems, supplied in an 8 ft (244 cm) length. Designed for smooth, reliable mechanical actuation, it suits Textron Motors ETC and Textron Motors Jet applications where precise throttle or shift control is essential on board.
|
$ 134.49
-
+
| ||
|
1-2 weeks delivery time The Bukh MACH C48 Bowden-style control cable is a 13 ft (396.5 cm) cable intended for jet drive control on Textron Motors ETC and Jet applications. Built to provide smooth, reliable mechanical actuation, it supports precise throttle or shift control response in marine jet propulsion installations.
|
$ 312.02
-
+
| ||
|
1-2 weeks delivery time The Bukh MG004 magnesium anode is a 0.7 kg sacrificial anode for FX-3D/MG applications, designed to help protect underwater metal components from galvanic corrosion. By preferentially corroding, it supports longer service life for the protected assembly in harsh seawater conditions.
|
$ 51.51
-
+
| ||
|
1-2 weeks delivery time The Bukh OPT99-R0001 seawater pump unit is a factory-fitted cooling component for BUKH R210 marine engines, supplying seawater flow through the engine’s raw-water cooling circuit for dependable temperature control underway. This part is intended to be ordered together with a new engine; for separate supply, use the spare parts price list selection.
|
$ 2,246.95
-
+
| ||
|
1-2 weeks delivery time The Bukh OPT99-S0001 factory-fitted exhaust hi-riser is designed for the exhaust system on BUKH S270 marine engines, helping route exhaust gases safely with added height to support proper discharge routing in marine installations. This option is only available when ordered together with a new engine; for separate supply, refer to the spare parts price list.
|
$ 2,434.03
-
+
| ||
|
1-2 weeks delivery time The Bukh OPT99-S0004 seawater pump is a factory-mounted cooling component for BUKH S270 marine engines, supplying the raw-water flow needed for heat removal in the seawater cooling circuit. This option is only orderable together with a new engine; for separate supply, select the corresponding item from the spare parts price list.
|
$ 2,425.55
-
+
| ||
|
1-2 weeks delivery time The Bukh OPT99-S0008 power steering pump is a factory-installed unit for BUKH S270 marine engines, built to supply the hydraulic flow and pressure needed for assisted steering response. This pump is available only when ordered together with a new engine; for separate supply, refer to the Bukh spare parts price list.
|
$ 1,890.98
-
+
| ||
|
1-2 weeks delivery time The Bukh R030G1304 replacement kit is a service kit for the Lubricating Oil Filter G, built to support clean, well-regulated lubrication in your BUKH marine diesel installation. Renewing the oil filter service components helps protect critical engine internals by maintaining effective oil filtration during regular maintenance intervals.
|
$ 669.90
-
+
| ||
|
1-2 weeks delivery time The Bukh R6028 exhaust sealing gasket (G105) is designed to seal exhaust joint interfaces in BUKH marine engine exhaust assemblies. It helps maintain a tight, reliable connection to support safe exhaust gas routing and reduce the risk of leakage at the mating surfaces.
|
$ 50.13
-
+
| ||
|
1-2 weeks delivery time The Bukh R60435/2 fuel lift pump replacement kit provides a practical solution for restoring reliable low-pressure fuel supply from the tank to the engine’s fuel system. Designed as a dedicated replacement kit for the fuel transfer function, it helps support steady fuel delivery and dependable engine operation in marine service.
|
$ 1,048.16
-
+
| ||
|
1-2 weeks delivery time The Bukh R6087 fuel pressure pump is a dedicated fuel-system pumping unit designed to maintain stable fuel delivery under pressure for BUKH marine diesel engines. By supporting consistent fuel feed to the engine’s injection system, it helps promote dependable starting, smooth running, and reliable performance underway.
|
$ 751.95
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.