BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh hydraulic gear is designed for marine propulsion transmission applications.
|
$ 9,057.31
-
+
| ||
|
1-2 weeks delivery time The Bukh hose set with fittings is designed for marine gear oil or hydraulic connection applications.
|
$ 514.71
-
+
| ||
|
1-2 weeks delivery time The Bukh 620H0202 coupling element is a drivetrain coupling component for BUKH DV10LME marine engines, designed to sit within the coupling assembly between the engine and the connected drive. It helps manage torsional vibration and load transitions, supporting smoother power transfer and protecting adjoining drivetrain components in marine operation.
|
$ 172.77
-
+
| ||
|
1-2 weeks delivery time The Bukh 620H0402 generator coupling element is a 100 mm diameter driveline component that supports smooth power transfer in BUKH generator installations. Positioned within the generator coupling, it helps manage torsional vibration and minor alignment movement, promoting quieter operation and protecting connected rotating parts under marine duty.
|
$ 431.28
-
+
| ||
|
1-2 weeks delivery time The Bukh 620H0502 clutch element is a clutch wear component used in Bukh marine drivetrain clutch systems, supplied as an updated replacement for the earlier part number 000E6036. Designed to restore dependable engagement and smooth power transfer, it helps keep propulsion response consistent and protects surrounding clutch components during marine operation.
|
$ 131.91
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0511 radial shaft seal ring is a precision sealing element designed to maintain a tight seal around a rotating shaft in BUKH marine engine applications. It helps retain lubricants where they belong while reducing the risk of leakage and limiting the ingress of water and contaminants, supporting cleaner operation and dependable service life.
|
$ 114.13
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0513 sealing element is designed for BUKH DV10LME marine diesel engines, helping close off mating surfaces to prevent fluid leakage and maintain stable operating conditions. Ideal for service and overhaul work, this seal supports a tight, reliable fit where the engine assembly depends on controlled sealing.
|
$ 8.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0514 sealing element is designed for BUKH DV10LME marine diesel engines, helping maintain tight joints where fluids or gases must be contained. As an OEM-grade replacement seal, it supports dependable operation by reducing the risk of leaks that can affect engine cleanliness, reliability, and service life.
|
$ 12.08
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0520 front cover gasket is a sealing element for the front cover area on BUKH DV10LSME marine diesel engines. It helps maintain a tight, leak-resistant joint at the front of the engine, supporting clean operation and protecting internal components by keeping fluids where they belong.
|
$ 37.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0526 sealing element is designed for BUKH DV10LME marine diesel engines, helping maintain a tight seal between mating components to prevent fluid leaks and support stable operation. As a direct replacement seal, it restores proper sealing integrity during maintenance and overhaul work.
|
$ 4.28
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0529 oil level dipstick provides a quick, accurate way to check engine oil level on BUKH DV10LME marine diesel engines. Designed for correct fit and clear level verification, it supports routine maintenance and helps protect the engine by ensuring the lubrication system is kept within the proper operating range.
|
$ 97.68
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0533 intermediate pipe is a connection pipe section for BUKH DV8 and DV10L marine diesel engines, used to link adjoining pipe runs into a secure, continuous flow path. Built as an OEM-fit replacement, it supports tidy routing and dependable system integrity in the engine’s installed pipework.
|
$ 67.75
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0534 complete cover is a protective engine cover unit for BUKH DV10LSME marine diesel engines. Designed to close and shield the relevant engine area, it helps keep internal components protected while supporting a secure, service-friendly assembly fit in marine operating conditions.
|
$ 196.29
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0542 sealing element is designed to create a tight, leak-resistant joint in the specified Poetry application. Used as a replacement seal, it helps maintain clean, reliable operation by preventing fluid or gas leakage across connected marine engine or system surfaces where proper sealing is critical.
|
$ 32.65
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0558 piston ring set is a standard-size 85 mm replacement designed for the piston assembly in BUKH DV10LME marine diesel engines. These rings help maintain strong cylinder sealing to support reliable compression and controlled oil film, contributing to efficient combustion and stable engine performance.
|
$ 888.47
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0561 E-valve guide is a precision-guiding component for the valve train on BUKH DV8 and DV10L marine diesel engines. Installed in the cylinder head, it supports accurate valve stem alignment for smooth operation, consistent seating, and dependable long-running performance at sea.
|
$ 115.71
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0566 valve plate is a precision component used within a Bukh valve assembly to support controlled flow and dependable sealing performance. Ideal for maintenance and rebuild work, it helps restore correct valve operation for reliable marine engine service.
|
$ 89.21
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0567 spring pin is a securing fastener used on BUKH DV10LME marine diesel engines to lock aligned components in position and resist vibration-related movement. Installed as a positive-retention pin, it helps keep assemblies correctly located for dependable operation in harsh marine conditions.
|
$ 3.21
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0568 spring plate is a precision engine component for BUKH DV10LME marine diesel engines, designed to support and retain a fitted spring in its seating position. It helps maintain correct spring alignment and consistent loading, supporting smooth, reliable operation in the associated engine assembly.
|
$ 56.25
-
+
| ||
|
1-2 weeks delivery time The Bukh 620L0570 exhaust valve is a precision engine valve for BUKH DV10LME marine diesel engines, supporting clean and controlled exhaust gas flow out of the combustion chamber. Installed in the cylinder head valve train, it helps maintain compression integrity and dependable running when servicing or rebuilding the top end.
|
$ 296.83
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.