BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 620A1278 O-ring sealing element is designed to create a tight, leak-resistant seal in Bukh marine engine and system connections. By maintaining sealing integrity at joined surfaces, it helps protect against fluid leakage and supports dependable operation in a marine environment.
|
$ 28.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A1280 sealing O-ring is designed for the BW7 dipstick (30653), helping maintain a tight seal at the dipstick interface. By reducing the risk of oil seepage and keeping contaminants out, it supports clean, reliable service during routine level checks and onboard maintenance.
|
$ 12.08
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A1287 locking ring is a retaining fastener used to secure fitted components in place within marine engine assemblies. It helps prevent unwanted axial movement, supporting stable alignment and reliable operation in high-vibration marine environments.
|
$ 23.99
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A2102 needle bearing is a precision bearing element for Bukh sail drive assemblies, supporting smooth shaft rotation under load. Designed as a direct-fit replacement, it helps maintain stable alignment and reduces friction in the drive train to support dependable propulsion performance.
|
$ 347.94
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A2103 thrust washer is a precision spacer element used to manage axial movement in rotating assemblies. Designed to help control end-float and handle thrust loads where shafts and bearings run under load, it supports smooth operation and helps protect adjacent components from wear in Bukh engine applications.
|
$ 290.89
-
+
| ||
|
1-2 weeks delivery time The Bukh clamping pin is intended for marine engine retaining and assembly applications.
|
$ 6.86
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A2114 O-ring is a sealing element for BUKH DV10LSME marine diesel engines, designed to help prevent fluid leakage at mating surfaces within the engine system. As an OEM-grade replacement seal, it supports secure assembly, reliable operation, and clean, leak-controlled service in marine conditions.
|
$ 15.29
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A2115 washer is a precision fastening element for the DV10LSME saildrive assembly, helping distribute clamping load and support secure, vibration-resistant joints in the drive installation. It’s suited for marine service where reliable fit and stable fastener retention are essential.
|
$ 154.27
-
+
| ||
|
1-2 weeks delivery time The Bukh key bolt is intended for marine engine fastening and mechanical locking applications.
|
$ 46.61
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A2120 fastening screw is a genuine Bukh hardware component used to secure parts within marine engine assemblies. It helps maintain a tight, reliable connection under vibration and continuous onboard operation, making it well-suited for service and replacement work on Bukh equipment.
|
$ 49.01
-
+
| ||
|
1-2 weeks delivery time The Bukh washer is intended for marine engine assembly and spacing applications.
|
$ 10.94
-
+
| ||
|
1-2 weeks delivery time The Bukh washer is intended for marine engine assembly and spacing applications.
|
$ 17.87
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A2153 disc is a precision-fit hardware component used within Bukh marine engine assemblies to support correct part positioning and secure component stack-up. Ideal for service replacements, it helps maintain reliable alignment and consistent mechanical retention where a disc-type spacer or bearing surface is required.
|
$ 13.32
-
+
| ||
|
1-2 weeks delivery time The Bukh washer is designed for marine engine assembly and spacing applications.
|
$ 33.54
-
+
| ||
|
1-2 weeks delivery time The Bukh washer is intended for marine engine assembly and spacing applications.
|
$ 38.55
-
+
| ||
|
1-2 weeks delivery time The Bukh 620A2158 adjusting shim 0.2 is a precision spacing element used to fine-tune clearances during assembly or service. Ideal for controlled adjustments where accurate positioning matters, this shim helps support correct component alignment and stable operation in Bukh marine engine systems.
|
$ 38.09
-
+
| ||
|
1-2 weeks delivery time The Bukh washer is intended for marine engine spacing and assembly applications.
|
$ 16.29
-
+
| ||
|
1-2 weeks delivery time The Bukh washer is designed for marine engine precision spacing applications.
|
$ 16.29
-
+
| ||
|
1-2 weeks delivery time The Bukh washer is intended for marine engine assembly and spacing applications.
|
$ 16.29
-
+
| ||
|
1-2 weeks delivery time The Bukh washer is designed for marine engine spacing and service applications.
|
$ 16.29
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.