Article
YSiveco_C13_ENTM83
1-2 weeks delivery time
Price incl. 19% VAT
Price incl. 19% VAT
Our managers will contact you and clarify the terms of the order
Marine engine Iveco C13 825/C13 ENTM83 825 hp/607 kW. Selection, technical calculation, certificates and equipment available on request.
- Description
- Ask a Question
-
Specifications
Thermodynamic cycle: 4-stroke diesel
Inlet: Cooled Turbocharged
Layout: 6 cylinders in a row
Diameter x Stroke: 135 x 150 mm
Engine size: 12.88 L
Valves per cylinder: 4
Injection System: Injector Pump
Cooling: Double Circuit System (Sea Water/Coolant)
Direction of flywheel rotation: Counterclockwise
Maximum power, depending on mode: 442 (600) to 607 (825) kW (HP)
At 2400 rpm
Maximum oil consumption% of fuel consumption ≤ 0.2
Oil and filter exchange interval: 600 h
Dry weight: 1400 kg
Overall dimensions (d x w x v): 2015x1064x1039 mm
Standard
Flywheel Crankcase: SAE 1
Flywheel size: 14 "
Turbine: 2 - Liquid cooled
Air Filter: Rear
Heat Exchanger: Tubular
Water tank: Included
Water Pump: Outer/Inner Loop
Fuel filter: 1-right
Fuel pre-filter: on, loose
Fuel Pump: On
Oil filter: 2-left
Pallet: Enabled
Oil heat exchanger: Enabled
Oil filling hole: On the head cover
Starter: 24V - 5.5kW
28 V - 90 A Recharge Generator
Stop Device: Electronic Control Unit
Wiring: 24V - Electrical Motor Harness
Advanced Options
Supports: Adjustable elastic 4 pcs.
Starter: 24V - Isolated
Recharge Generator: 24V - 90A - Isolated
Fuel tubes: Dual with leakage sensor to PC/PPP requirements
APS system: For instrumentation and emergency module under PC/PPP requirements
Dual fuel/oil filters: To be replaced when the engine is running under PC/PPP requirements
Shelf: Optional for power take-off
Connecting cable for digital control panel: 12-core - 3, 5, 7,10,15 meters
Pyrometer: For measurement of exhaust gas temperature
Instrumentation (loose): 12-24 B
Stop solenoid: 12-24 B
Control Panel: Analog/Digital 12-24 B
Duplicate Fly-Bridge Panel: Analog/Digital 12-24 B
Gas vent: Dry with compensator, wet
Gearbox T.Disc MG 5114A angle 7 °: gear ratio 1.92; 2,50
Gearbox ZF 360A angle 7 °: gear ratio 2,609; 1,964; 1,485
Gearbox ZF 325-1A angle 7 °: gear ratio 1.216; 1,485; 1,733; 2,037
Protective grille: For protection against moving elements (belt, pulley)
Calorifer/heating: Heat extraction system for interior/engine room heating
Protection of systems: Fuel pipes, oil
Certification: PPP/PMPC/IMO-MARPOL/RIVR/2003/44/EC
-
Ask a Question
Popular products