ID
977787
$ 33.15
1-2 weeks delivery time
-
+
The Vetus CABLE05A is a 0.5-meter Type 33C mid-range control cable designed for shorter and simpler routing paths. It features a 130 mm minimum bending radius, a 76.2 mm stroke and standard 10-32 UNF threaded ends, making it suitable for throttle and shift applications with Vetus, Morse, Teleflex, Ultraflex and similar marine control systems. The specified length refers to the full end-to-end measurement.
- Description
- Ask a Question
-
Vetus CABLE05A Type 33C Control Cable, 0.5 m Length
The Vetus CABLE05A is a mid-range Type 33C push/pull control cable designed for shorter and straightforward marine installation routes. With a total end-to-end length of 0.5 meters, it is well suited for compact layouts where limited cable travel is required. Its construction includes a multi-strand core for dependable strength and a standard outer sheath designed for general-use applications. The cable provides consistent mechanical performance for throttle and gearshift systems across a variety of marine control platforms.
Main Features
- Type 33C marine control cable
- Total length: 0.5 m
- Designed for short and simple cable runs
- Compatible with Vetus, Morse, Teleflex, Ultraflex and other marine systems
- Standard 10-32 UNF threaded rod ends
- Recommended for throttle and shift applications
- Replaced in production by the LF-series “Low Friction” cables (available while stock lasts)
Technical Overview
Parameter Specification Cable Type Type 33C (Standard) Overall Length 0.5 m Thread 10-32 UNF Nominal Travel 75 mm Stroke 76.2 mm (3") Minimum Bend Radius 130 mm
Additional Information
- Suitable for simple or short-distance routing
- Lengths available from 0.5 m to 10 m in 0.5 m steps
- Lengths up to 15 m available by special order
- Standard construction with reliable performance for marine applications
- This “Red Jacket” series has been discontinued in favor of the Vetus CABLF low-friction cables
Application
The Vetus CABLE05A is intended for marine throttle and gearshift systems requiring a compact, short-length Type 33C cable. Its 130 mm minimum bending radius allows installation in tight routing spaces while maintaining reliable control movement. Recommended for simple mechanical layouts and available while remaining stock lasts.
-
Popular products
