ID
1281679
$ 6.04
1-2 weeks delivery time
-
+
The Whale WX1587 stem adapter is a 1/2-inch BSP male thread connector supplied as a 2-piece pack for connecting to 15 mm piping (also described as a 12 mm stem to 1/2-inch BSP male thread connection). It is rated up to 6 bar (87 psi) at 65°C (150°F) for hot water and up to 12 bar (174 psi) at 20°C (68°F) for cold water, with article number 17540533 and manufacturer number WX1587.
- Description
- Ask a Question
-
Whale WX1587 1/2 Inch BSP Male Stem Adapter (2-Pack)
The Whale WX1587 is a stem adapter for making a threaded connection to pipework in a mobile plumbing system. It is supplied as a two-piece pack and is specified for connection to 15 mm piping, with an additional description listing a 12 mm stem connection to a 1/2 inch BSP male thread.
Technical Specifications
Brand Whale Article Number 17540533 Manufacturer Number WX1587 Adapter Type Stem adapter Thread 1/2 inch BSP male Pipe Connection (as described) 15 mm piping Stem Connection (as described) 12 mm stem to 1/2 inch BSP male thread Packing 2 units Max Pressure (Hot Water) 6 bar (87 psi) Max Temperature (Hot Water) 65 C (150 F) Max Pressure (Cold Water) 12 bar (174 psi) Max Temperature (Cold Water) 20 C (68 F)
Features
- Designed for use in mobile plumbing applications
- Two-step installation procedure that does not require special tools to make a watertight connection
- WX15 fitting and pipework design intended for easy installation and re-usability of components
- Double gripper design for pipework retention (as described)
- Cage collet design intended to reduce leaks where fittings are installed close to tight bends (as described)
- Collet with internal support ring intended to help keep the O-ring seal in position under pressure (as described)
- Single-piece molding intended to improve fitting strength (as described)
- Outer sleeve incorporates a collet cover to help prevent accidental pipework release (as described)
- No collet clips required, intended to reduce installation time (as described)
- Pipework measured cut marks described as a visual guide to ensure fittings are pushed fully home
Product Details
Installation (as described): Cut pipework to length by making a straight, clean cut using Whale cutters. Push the pipework length into the fitting to the second internal stop.
To release pipework (as described): Push back the grey collet into the fitting, hold the collet in, and pull out the pipework length.
-
Popular products
-
1-2 weeks delivery time$ 6.04 -
-
-
1-2 weeks delivery time$ 24.70 -
1-2 weeks delivery time$ 24.70 -
-
-
-
-
