|
1-2 weeks delivery time The Steyr 801890 glow-start switch assembly is an engine electrical control component supplied as a spare part for Steyr engines. It is identified as a glow-start switch unit, with an additional reference to old article number 2178761-3.
|
$ 572.71
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000005-0 protective cap component is a spare part for Steyr engines, specified as a protector cap with a size range of 11.3–12.8. It is identified in the input as a closure plug type component intended for engine-related service applications.
|
$ 2.40
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000158-0 4-contact plug assembly is a spare part for Steyr engines, supplied as a 4-pole socket housing type plug with four electrical contact positions.
|
$ 17.37
-
+
| ||
|
1-2 weeks delivery time The Steyr 900016 nut component is specified to ISO 4032 with M6 sizing and A4-70 classification. It is supplied as a spare part for Steyr engine applications under the Steyr Motors parts program.
|
$ 2.40
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000164-0 sealing plug is a spare part intended for electrical connector interfaces on Steyr engines. It is identified as a sealing plug for electrical connections and is supplied for service and replacement in Steyr engine electrical connection points.
|
$ 2.40
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000173-0 electrical contact socket is a socket-contact spare part for Steyr engines, specified for conductor cross-sections of 2.0–3.0 mm² and an equivalent wire range of 12–14 AWG.
|
$ 5.19
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000179-0 hex thin nut is a threaded fastener specified as 1 11/16-18UNEF-2B, supplied as a spare part for Steyr engine applications and intended for use where a low-profile hex nut is required.
|
$ 23.77
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000189-0 knurled thumb screw is a DIN 464 fastening component specified as M4x10 with CuZn material designation and a high-profile style. It is supplied as a spare part for Steyr engine applications.
|
$ 12.79
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000259-0 socket head cap screw is an ISO 4762 fastener specified as M10x65 with strength class 8.8 and designation A3. It is supplied as a spare part for Steyr engine applications and is intended for assemblies requiring an internal-hex cylindrical head screw to the stated ISO standard.
|
$ 6.38
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000286-2 DN10 pipe clamp is a pipe retention component supplied as a spare part for Steyr engine installations. It is specified as a DN10 clamp for securing associated pipework in Steyr engine systems.
|
$ 2.40
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000287-1 hex flange bolt is an EN 1665 fastener specified as M6x12 with strength class 8.8 and designation A3C-PR, supplied as a spare part for Steyr engines.
|
$ 2.59
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000299-0 two-pole fuse holder is an electrical system spare part for Steyr engines, intended to support fuse installation in a 2-pole configuration as part of the engine electrical protection circuit.
|
$ 7.20
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000300-0 fuse holder cover component is a lid cover intended for use on a fuse holder in Steyr engine electrical installations. It is supplied as a spare part for Steyr engines and is identified by Steyr Motors part number 9000300-0.
|
$ 2.40
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000307-1 electrical contact is an engine spare part specified for conductors with a cross-sectional range of 0.5 to 1.0 mm². It is supplied as a replacement component for Steyr engine electrical wiring and connection tasks where this conductor size is required.
|
$ 2.40
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 9000421-0 relay socket is an electrical spare part intended for use on Steyr engines and supplied as a relay socket component for engine electrical installations. It is listed as compatible with multiple Steyr SE and MO engine models and is provided as a spare part for Steyr engine applications.
|
$ 18.23
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000423-0 flange-head hex bolt is specified as an EN 1665 and DIN 6921 hex flange bolt in size M8x16 with strength class 10.9 and designation A2C. It is supplied as an original spare part for Steyr engine applications.
|
$ 8.80
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000425-0 pipe union adapter is a screw-in fitting specified as DIN 3901-L8A-M-ST-A3C, supplied as a spare part for Steyr engine installations. Identified in the source data as a Steyr Motors component, it is intended for pipe union adapter connections in Steyr engine systems.
|
$ 6
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000437-0 bearing component is a deep groove ball bearing manufactured to DIN 625, size 6203 with 2RSH sealing, supplied as a spare part for Steyr engines. It is specified as a DIN 625-6203 deep groove ball bearing for engine service applications.
|
$ 42.72
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000474-0 threaded screw plug is a spare part for Steyr engine applications, specified as an M30x1.5 plug and referenced for VSL applications. It is supplied as an original replacement component for Steyr Motors engine systems.
|
$ 19.77
-
+
| ||
|
1-2 weeks delivery time The Steyr 9000532-0 pipe union adapter is a screw-in fitting specified as DIN 3901-LL8B-M-ST-A3C for Steyr engine installations. Supplied as a spare part for Steyr engines, it is identified in the product information as a pipe union adapter for DIN 3901 applications.
|
$ 25.16
-
+
| ||