|
1-2 weeks delivery time The Steyr 703894 electrical power cable assembly is a 5 m twin-control cable supplied as a spare part for Steyr engine installations. It is intended for power connection use within twin control system configurations as identified in the provided part description.
|
$ 472.05
-
+
| ||
|
1-2 weeks delivery time The Steyr 703895 power cable assembly is a 10 m electrical lead intended for twin control system installations on Steyr engines. It is supplied as a spare part for Steyr engine applications and is explicitly not suitable for use with 12 V actuators.
|
$ 864.64
-
+
| ||
|
1-2 weeks delivery time The Steyr 703896 ignition plus input power cable is a 20 m electrical cable supplied as a spare part for Steyr engines. It is specified as a power cable for an ignition plus input connection within Steyr engine electrical systems.
|
$ 305.53
-
+
| ||
|
1-2 weeks delivery time The Steyr 703899 bus cable assembly is a 10 m station/propulsion communication cable supplied as a spare part for Steyr engine installations. It is specified as a station/propulsion bus cable and is intended for use within Steyr engine system wiring.
|
$ 279.57
-
+
| ||
|
1-2 weeks delivery time The Steyr 703903 adapter cable set is a J1939 interface cable kit supplied as a spare part for Steyr engines.
|
$ 393.39
-
+
| ||
|
1-2 weeks delivery time The Steyr 703904 bus cable connector is an electrical connection component intended for station and propulsion bus cabling in Steyr engine installations. Supplied as a spare part for Steyr engines, it is used to interface bus cable runs within the station/propulsion system configuration.
|
$ 203.08
-
+
| ||
|
1-2 weeks delivery time The Steyr 703905 termination resistor component is a spare part for Steyr engines intended for station and propulsion system installations, providing line termination within the associated electrical interface.
|
$ 47.91
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 704175 Marex ECS single commander unit is a spare part for Steyr engine installations using the Marex ECS control system. The component is identified in the product information as a single-command configuration intended for Steyr engines.
|
$ 5,731.13
-
+
| ||
|
1-2 weeks delivery time The Steyr 704177 Marex ECS control unit is an engine control module supplied as a spare part for Steyr engines. It is identified in the product information as a Marex ECS control unit under Steyr Motors part number 704177.
|
$ 2,721.35
-
+
| ||
|
1-2 weeks delivery time The Steyr 704178 electrical wiring harness assembly is a single Marex ECS cable harness supplied as a spare part for Steyr engine installations.
|
$ 1,997.50
-
+
| ||
|
1-2 weeks delivery time The Steyr 704181 actuator unit is a 12V DC Marex ECS control actuator supplied as a spare part for Steyr engines. It is specified as an actuator for the Marex ECS system and is intended for use in Steyr engine installations requiring a 12V DC actuator component.
|
$ 4,283.35
-
+
| ||
|
1-2 weeks delivery time The Steyr 704818 molded hose assembly is an engine hose spare part specified for Steyr DM22 marine engine applications. Supplied as an original replacement component for Steyr engines, it is provided as a molded hose for installation where the DM22 configuration requires a formed hose section.
|
$ 259.62
-
+
| ||
|
1-2 weeks delivery time The Steyr 705234 hose clamp assembly with spring is specified as a spare part for Steyr engines and is identified as type 16-27/9-W4. It is supplied under Steyr Motors part number 705234 for hose retention in engine-related installations.
|
$ 13.57
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 705237 spring-loaded hose clamp is an engine spare part specified as a Hose Clamp With Spring in size designation 40-60/12-W4. It is intended for use on Steyr engine installations where this clamp specification is required.
|
$ 15.97
-
+
| ||
|
1-2 weeks delivery time The Steyr 705282 sealing element is an original spare part intended for the water distribution bar on Steyr marine engines. It is supplied as a dedicated seal for Steyr engine service and replacement requirements.
|
$ 8.59
-
+
| ||
|
1-2 weeks delivery time The Steyr 800118 engine control unit is an engine electronics control module supplied as a spare part for Steyr engines, identified in the product information with control unit designation M160053-B.
|
$ 3,455.84
-
+
| ||
|
1-2 weeks delivery time The Steyr Motors 800233 idler pulley assembly is an engine spare part intended for Steyr engine applications, providing an idler pulley component within the accessory drive routing.
|
$ 1,706.15
-
+
| ||
|
1-2 weeks delivery time The Steyr 800458 engine control unit module is an original spare part specified as an engine control unit for Steyr engines. Supplied as a replacement component for Steyr engine systems, it is identified by Steyr Motors part number 800458.
|
$ 18,928.88
-
+
| ||
|
1-2 weeks delivery time The Steyr 801192 engine control unit module is an original spare part for Steyr engines, specified for 150 kW at 3600 rpm. It is supplied as an engine electronics control assembly for Steyr Motors engine applications.
|
$ 3,583.65
-
+
| ||
|
1-2 weeks delivery time The Steyr 801728 EG pressure relief valve is an engine spare part for Steyr engines, intended to function as a pressure-limiting valve within the engine system.
|
$ 1,190.16
-
+
| ||