BEP Marine offers a comprehensive range of marine electrical products, including battery switches, VSR (Voltage Sensitive Relays), switch panels, and remote-operated battery switches. These products are designed to enhance the electrical systems of boats and yachts. The BEP Marine battery switch allows users to control power distribution, isolate batteries, and prevent electrical drain when the vessel is not in use. VSRs facilitate automatic charging and isolation of multiple battery banks, ensuring optimal battery health. The BEP Marine switch panels provide organized control for various onboard systems. These products collectively contribute to efficient energy management and improved safety on marine vessels.
|
1-2 weeks delivery time The BEP 1002017 is a DPST (Double Pole Single Throw) toggle switch for 12V DC systems, designed for simple Off/On control of two circuits simultaneously. It is rated at 25A at 12V DC and features #6-32 screw terminals for secure electrical connections. The switch has a chrome-plated actuator, non-illuminated design, and is suitable for marine and industrial control panels where reliable dual-circuit switching is required.
|
$ 20.05
-
+
| ||
|
1-2 weeks delivery time The BEP 1002018 is a DPDT chrome plated toggle switch for 12V/24V DC electrical systems, with an On-Off-On action for multi-circuit control. It is rated at 25A at 12V DC and 15A at 24V DC, and uses #6-32 screw terminals for secure wiring connections. Designed for harsh marine and industrial environments, this switch is ideal for applications such as interior/exterior lighting, horns, wipers, trim tabs, and power hatches.
|
$ 23.98
-
+
| ||
|
1-2 weeks delivery time The BEP 1002019 is a tipless toggle switch boot designed to improve weather protection for toggle switch installations. It is UV resistant and helps resist cracking and discoloration. The tipless design increases weather resistance while keeping the look of a stainless actuator, making it a practical solution for marine and outdoor electrical panels.
|
$ 32.01
-
+
| ||
|
1-2 weeks delivery time The BEP 1002020 is a full toggle switch boot designed to provide maximum protection for toggle switch installations in harsh marine and industrial environments. It is UV resistant and helps resist cracking and discoloration. Rated IP67, this full boot will withstand saltwater and fresh water immersion up to 30 minutes, making it ideal for protected and long-lasting panel installations.
|
$ 28.02
-
+
| ||
|
1-2 weeks delivery time The BEP 1002021 is an SPST chrome plated toggle switch for 12V DC electrical systems with a simple Off/On action. It is rated 10A at 12V DC and uses #6-32 screw terminals for secure wiring connections, making it a practical choice for marine and industrial panels where a compact and reliable on/off switch is required.
|
$ 18.02
-
+
| ||
|
1-2 weeks delivery time The BEP 1002022 is an SPST chrome plated toggle switch for 12V DC systems with a simple Off/On switching action. It is rated 10A at 12V DC and features #6-32 screw terminals for secure wiring, making it a practical choice for marine and industrial switch panels requiring compact and reliable on/off circuit control.
|
$ 20.05
-
+
| ||
|
1-2 weeks delivery time The BEP 1002023 is an SPST toggle switch designed for 12V DC systems with a simple Off/On action. It is rated 10A at 12V DC and comes pre-wired with 18 AWG wire leads (6"), providing a practical solution for quick installation where screw or blade terminals are not required.
|
$ 18.02
-
+
| ||
|
1-2 weeks delivery time The BEP 1002201 is a motor reversing solenoid designed for 12V DC systems. It supports motor reversing control and is rated 75A at 12V DC, making it suitable for applications where a low-current switch is used to remotely control higher current motor loads.
|
$ 177.84
-
+
| ||
|
1-2 weeks delivery time The BEP 1002206 is an engine starting solenoid designed for 12V DC electrical systems. It is rated 100A at 12V DC and is intended for remotely switching high-amperage loads using a low-amperage on/off control circuit. The solenoid uses 5/16-24 thread termination for secure electrical connections.
|
$ 79.97
-
+
| ||
|
1-2 weeks delivery time The BEP 1002301 is a compact 12V alarm module designed to add warning functionality to a dash or panel. It features an audible buzzer and a bright red warning light that illuminates when voltage is present. Built for 12V DC systems, it uses #8-32 screw terminals for connection and is suitable for use with temperature, oil pressure, and engine warning alarm kits.
|
$ 73.33
-
+
| ||
|
1-2 weeks delivery time The BEP 100A-50MV is a shunt for ammeter designed for accurate current monitoring in electrical systems. It is rated for 100A with a 50mV output signal, allowing an ammeter to measure current flow through the circuit. This shunt provides a simple and reliable solution for tracking electrical load in marine applications.
|
$ 82.45
-
+
| ||
|
1-2 weeks delivery time The BEP 1100-BK is a Contour 1100 Series single interior switch designed for surface or recess mounting. It is rated at 10A DC and can be rotated 90° for horizontal mounting. Dimensions are 2.4" x 1.2" x 0.75" (60 x 30 x 18 mm). The switch is supplied with a label set for clear circuit identification.
|
$ 39.23
-
+
| ||
|
1-2 weeks delivery time The BEP 1101-BK is a Contour 1100 Series double interior switch designed for surface or recess mounting. It is current rated at 10A DC and can be turned 90° for horizontal mounting. Overall size is 3.6" x 1.2" x 0.75" (91 x 30 x 18 mm), and the switch is supplied with a label set for circuit identification.
|
$ 44.85
-
+
| ||
|
1-2 weeks delivery time The BEP 121-710-1101/1 is a handle lock used on BEP battery management panels for essential circuit breakers (CBs). It helps prevent accidental or unintended actuation of essential circuits from either the “ON” or “OFF” position. Ordered separately.
|
$ 4.69
-
+
| ||
|
1-2 weeks delivery time The BEP 12VBR Trolling Motor Receptacle, a collaborative effort among Afi, Marinco, Guest, Nicro, and Bep Conn Pro, offers a dependable solution for seamless electrical connectivity between your trolling motor and power source. Built with durability in mind, it ensures optimal performance even in challenging marine conditions. Easy to install and reliably efficient, this receptacle allows you to focus on your water adventures without concerns about power interruptions.
|
$ 40.73
-
+
| ||
|
1-2 weeks delivery time The BEP 12VBRAD is a rugged 3-wire ConnectPro wire receptacle adapter tailored for marine and automotive use. Its sturdy design and compatibility with 6AWG wire ensure reliable power transmission, making it an ideal solution for upgrading or replacing electrical components. With the BEP 12VBRAD, you can trust in seamless connectivity and dependable performance for your electrical systems.
|
$ 33.16
-
+
| ||
|
1-2 weeks delivery time The BEP 150A-50MV is a marine-grade shunt for ammeters, designed to measure current up to 150A with a 50mV output. It is used for accurate current monitoring in marine electrical systems and is built from durable materials to withstand harsh onboard conditions.
|
$ 82.45
-
+
| ||
|
1-2 weeks delivery time The BEP 184050P-01-1 is a heavy-duty panel-mount circuit breaker rated at 50A, designed to protect electrical circuits from overloads and short circuits. It features a manual reset function for controlled circuit restoration and is built for industrial and automotive applications where durable, dependable circuit protection is required.
|
$ 100.23
-
+
| ||
|
1-2 weeks delivery time The BEP 184100F-01-1 is a high-amperage surface-mount circuit breaker rated at 100A for systems up to 42V DC, featuring a Type III manual reset mechanism for reliable circuit protection and controlled power restoration. Built from black UL-rated 94V0 thermoplastic, it is sealed and IP67 rated, making it suitable for harsh installation areas such as engine compartments and bilge spaces, and is typically used in auxiliary and accessory circuits in trucks, buses, RVs, and marine systems.
|
$ 100.23
-
+
| ||
|
1-2 weeks delivery time The BEP 184100P-01-1 is a heavy-duty panel mount circuit breaker rated at 100A, designed to provide reliable protection against overloads and electrical faults in demanding installations. It features a manual reset function for controlled restoration after a trip, and its panel mount design allows easy access and clean integration into dashboards, switch panels, and electrical control boards in marine, automotive, and industrial systems.
|
$ 100.23
-
+
| ||
What is the function of a BEP Marine battery switch and how does it contribute to efficient power management on boats and yachts?
A BEP Marine battery switch serves as a vital component for power management on boats and yachts. It allows users to control the connection between the battery and onboard systems, helping to prevent unnecessary battery drain during periods of inactivity. This contributes to efficient power utilization, extends battery life, and enhances safety. The BEP Marine Battery Switch, in conjunction with other products like VSRs (Voltage Sensitive Relays) and switch panels, provides boat owners with the ability to manage and distribute power effectively, ensuring optimal performance of electrical systems while maintaining a reliable power supply for various onboard equipment.
How does a BEP Marine VSR (Voltage Sensitive Relay) enhance battery charging and maintenance across multiple battery banks?
A BEP Marine VSR (Voltage Sensitive Relay) plays a crucial role in optimizing battery charging and maintenance across multiple battery banks on boats and yachts. This intelligent relay automatically detects the voltage levels of different battery banks and connects them for charging when the main engine is running or an external charging source is active. This enhances battery performance and extends their lifespan by ensuring that all batteries receive an appropriate charge without overloading or undercharging, thereby contributing to efficient energy distribution and reliable power supply on marine vessels.
For secure installation and durable storage, pair this kit with a reliable Marine Battery Box.
In what scenarios is the BEP Marine 701 MD commonly utilized, and what specific features does it offer for marine applications?
The BEP Marine 701 MD is commonly employed in scenarios requiring reliable battery monitoring and management on boats and yachts. This advanced module offers features like voltage, current, and temperature sensing, making it a valuable tool for assessing battery health and performance. It aids in preventing battery overdischarge and overheating, ensuring optimal battery conditions and contributing to safer and more efficient marine operations.