BEP Marine offers a comprehensive range of marine electrical products, including battery switches, VSR (Voltage Sensitive Relays), switch panels, and remote-operated battery switches. These products are designed to enhance the electrical systems of boats and yachts. The BEP Marine battery switch allows users to control power distribution, isolate batteries, and prevent electrical drain when the vessel is not in use. VSRs facilitate automatic charging and isolation of multiple battery banks, ensuring optimal battery health. The BEP Marine switch panels provide organized control for various onboard systems. These products collectively contribute to efficient energy management and improved safety on marine vessels.
|
1-2 weeks delivery time The BEP 902NMV is a vertical DC circuit breaker panel (no meter) designed for 12V DC systems and providing protected distribution for 12 loads. It is fitted with single pole circuit breakers in the following configuration: 3 x 5A, 4 x 10A, 4 x 15A, 1 x 25A, and is rated for 160A maximum amperage. The panel includes a 6-way negative bus, is supplied with label sheet (1), and has overall dimensions of 11.25" x 5" (285 x 127 mm).
|
$ 784.69
-
+
| ||
|
1-2 weeks delivery time The BEP 902V-AM is a DC circuit breaker panel with an analog meter, designed for 12V DC systems and supporting 12 loads. It is fitted with single pole circuit breakers in the following configuration: 3 x 5A, 4 x 10A, 4 x 15A, 1 x 25A, and is rated for 160A maximum amperage. The panel includes a 6-way negative bus, is supplied with label sheet (1), and has a mounting depth of 2.5" (64 mm). Overall panel size is 15" x 5" (380 x 127 mm).
|
$ 1,188.74
-
+
| ||
|
1-2 weeks delivery time The BEP 902V-DCSM is a DC circuit breaker panel with a digital meter, designed for 12V DC systems and supporting 12 loads. It uses single pole circuit breakers in the following configuration: 3 x 5A, 4 x 10A, 4 x 15A, 1 x 25A, and is rated for 160A maximum amperage. The panel includes a 6-way negative bus, is supplied with label sheet (1), and has a mounting depth of 2.5" (64 mm). Overall panel size is 15" x 5" (380 x 127 mm).
|
$ 1,627.10
-
+
| ||
|
1-2 weeks delivery time The BEP 903-AM is a vertical DC circuit breaker panel designed for 12V DC systems, featuring 20 single pole positions for organized circuit protection and switching. The panel is equipped with an analog meter for onboard electrical monitoring and provides a centralized layout for managing multiple DC circuits in marine installations, helping keep wiring and circuit control clean and structured.
|
$ 1,491.38
-
+
| ||
|
1-2 weeks delivery time The BEP 903-AM-24 is a vertical DC circuit breaker panel designed for 24V DC electrical systems and equipped with 20 single pole circuit breakers for centralized circuit control and protection. This panel provides an organized layout for managing multiple DC circuits on board and is intended for marine installations where a compact vertical format helps structure and simplify electrical distribution.
|
$ 1,550.66
-
+
| ||
|
1-2 weeks delivery time The BEP 903-DCSM is a DC circuit breaker panel with a digital meter, designed for 12V DC systems and supporting 20 loads. It is fitted with single pole circuit breakers in the following configuration: 5 x 5A, 6 x 10A, 7 x 15A, 1 x 20A, 1 x 30A, and features 160A/80A/160A buses. The panel includes a 12-way negative bus, is supplied with label sheets (1–3), and has a mounting depth of 2.5" (64 mm). Overall panel size is 7.9" x 13.9" (200 x 351 mm).
|
$ 2,132.54
-
+
| ||
|
1-2 weeks delivery time The BEP 903V-DCSM is a DC circuit breaker panel with a digital meter, designed for 12V DC systems and supporting 20 loads. It is fitted with single pole circuit breakers in the following configuration: 5 x 5A, 6 x 10A, 7 x 15A, 1 x 20A, 1 x 30A, and features 160A/80A/160A buses. The panel includes a 12-way negative bus, is supplied with label sheets (1–3), and has a mounting depth of 2.5" (64 mm). Overall panel size is 7.9" x 13.9" (200 x 351 mm).
|
$ 2,388.39
-
+
| ||
|
1-2 weeks delivery time The BEP 904-AM is a DC circuit breaker panel with an analog meter, designed for 12V DC systems and supporting 16 loads. It uses single pole circuit breakers in the following configuration: 4 x 5A, 5 x 10A, 5 x 15A, 1 x 20A, 1 x 25A, and is rated for 160A per bus. The panel includes a 12-way negative bus, is supplied with label sheets (1–2), and has a mounting depth of 2.5" (64 mm). Overall panel size is 11.6" x 9.75" (295 x 239 mm).
|
$ 1,452.38
-
+
| ||
|
1-2 weeks delivery time The BEP 904-AM-24 is a DC circuit breaker panel designed for 24V DC systems and supporting 16 loads. It uses single pole circuit breakers in the following configuration: 4 x 5A, 5 x 10A, 5 x 15A, 1 x 20A, 1 x 25A, and is rated for 160A per bus. The panel includes a 12-way negative bus, is supplied with label sheets (1–2), and has a mounting depth of 2.5" (64 mm). Overall panel size is 11.6" x 9.75" (295 x 239 mm).
|
$ 1,884.50
-
+
| ||
|
1-2 weeks delivery time The BEP 904-DCSM is a DC circuit breaker panel with a digital meter, designed for 12V DC systems and supporting 16 loads. It is fitted with single pole circuit breakers in the following configuration: 4 x 5A, 5 x 10A, 5 x 15A, 1 x 20A, 1 x 25A, and is rated for 160A per bus. The panel includes a 12-way negative bus, is supplied with label sheets (1–2), and has a mounting depth of 2.5" (64 mm). Overall panel size is 11.6" x 9.75" (295 x 239 mm).
|
$ 2,140.35
-
+
| ||
|
1-2 weeks delivery time The BEP 904NM is a DC circuit breaker panel (no meter) designed for 12V DC systems and supporting 16 loads. It is fitted with single pole circuit breakers in the following configuration: 4 x 5A, 5 x 10A, 5 x 15A, 1 x 20A, 1 x 25A, and is rated for 160A per bus. The panel includes a 12-way negative bus, is supplied with 1 label sheet, and has a mounting depth of 2.5" (64 mm). Overall panel size is 7.9" x 9.75" (200 x 239 mm).
|
$ 993.74
-
+
| ||
|
1-2 weeks delivery time The BEP 904NM-DP is a DC circuit breaker panel (no meter) designed for 12V DC systems and configured with 8 double pole circuit breakers for protected power distribution. The panel includes a 12-way negative bus, is supplied with 1 label sheet, and has a mounting depth of 2.5" (64 mm). Overall panel size is 7.9" x 9.75" (200 x 239 mm).
|
$ 1,386.86
-
+
| ||
|
1-2 weeks delivery time The BEP 904NMH is a DC circuit breaker panel (no meter) designed for 12V DC systems and supporting 16 loads. It is equipped with single pole circuit breakers in the following configuration: 4 x 5A, 5 x 10A, 5 x 15A, 1 x 20A, 1 x 25A, and is rated for 80A per bus. The panel includes a 12-way negative bus, is supplied with 1 label sheet, and has a mounting depth of 2.5" (64 mm). Overall panel size is 4.5" x 18.25" (115 x 463 mm).
|
$ 1,024.94
-
+
| ||
|
1-2 weeks delivery time The BEP 904NMV is a DC circuit breaker panel (no meter) for 12V DC systems, providing 16 load positions with single pole circuit breakers in the following mix: 3 x 5A, 4 x 10A, 4 x 15A, and 1 x 25A. It is rated to 160A maximum amperage, includes a 6-way negative bus, and is supplied with 1 label sheet. Panel dimensions are 14.6" x 5" (370 x 127 mm) with a mounting depth of 2.5".
|
$ 995.29
-
+
| ||
|
1-2 weeks delivery time The BEP 905-AM is a 12V DC circuit breaker panel with an analog meter, designed for organized distribution and monitoring of onboard DC circuits. It provides 24 single pole (24SP) circuit positions, allowing multiple loads to be managed from one central panel. The integrated analog voltage measurement supports quick system checks during operation, making the panel suitable for structured DC power management in marine and other 12V installations.
|
$ 2,017.11
-
+
| ||
|
1-2 weeks delivery time The BEP 905-AM-24 is a 24V DC circuit breaker panel designed for structured onboard power distribution and protection. It provides 24 single pole circuit positions, allowing multiple DC loads to be protected and controlled from one central panel. Built for 24V marine electrical systems, the BEP 905-AM-24 is a practical solution for clean circuit organization and reliable overload protection in professional and recreational installations.
|
$ 2,017.11
-
+
| ||
|
1-2 weeks delivery time The BEP 905-DCSM is a 12V DC circuit breaker panel with digital metering designed to manage and protect up to 24 individual loads. The panel includes 24 single pole circuit breakers configured as 5x 5A, 8x 10A, 8x 15A, 1x 20A, 1x 25A, and 1x 30A, with a maximum amperage of 160A per bus. It features a 12-way negative bus, compact installation depth, and overall dimensions of 11.6" x 13.9" (295 x 351 mm), making it a practical choice for structured onboard DC power distribution and monitoring.
|
$ 2,494.48
-
+
| ||
|
1-2 weeks delivery time The BEP 905NM is a 12V DC circuit breaker panel (no meter) designed for organized protection and distribution across 24 individual loads. It is supplied with 24 single pole circuit breakers configured as 5x 5A, 8x 10A, 8x 15A, 1x 20A, 1x 25A, and 1x 30A, and supports a maximum amperage of 160A per bus. The panel includes a 12-way negative bus and has overall dimensions of 7.9" x 13.9" (200 x 351 mm), making it a compact solution for multi-circuit DC installations where metering is not required.
|
$ 1,452.38
-
+
| ||
|
1-2 weeks delivery time The BEP 905V-AM is a 12V DC circuit breaker panel with an integrated analog meter for monitoring system voltage, designed to manage and protect up to 24 DC load circuits. It provides organized power distribution and individual overcurrent protection through single pole circuit breakers, making it a practical solution for multi-circuit DC installations where quick visual voltage monitoring is required.
|
$ 2,280.75
-
+
| ||
|
1-2 weeks delivery time The BEP 905V-AM-24 is a 24V DC circuit breaker panel with an integrated analog meter for quick voltage monitoring and control of up to 24 DC load circuits. It features 24 single pole circuit breakers for individual circuit protection and organized power distribution, making it a practical solution for larger DC electrical systems where clear circuit management and reliable overcurrent protection are required.
|
$ 2,299.47
-
+
| ||
What is the function of a BEP Marine battery switch and how does it contribute to efficient power management on boats and yachts?
A BEP Marine battery switch serves as a vital component for power management on boats and yachts. It allows users to control the connection between the battery and onboard systems, helping to prevent unnecessary battery drain during periods of inactivity. This contributes to efficient power utilization, extends battery life, and enhances safety. The BEP Marine Battery Switch, in conjunction with other products like VSRs (Voltage Sensitive Relays) and switch panels, provides boat owners with the ability to manage and distribute power effectively, ensuring optimal performance of electrical systems while maintaining a reliable power supply for various onboard equipment.
How does a BEP Marine VSR (Voltage Sensitive Relay) enhance battery charging and maintenance across multiple battery banks?
A BEP Marine VSR (Voltage Sensitive Relay) plays a crucial role in optimizing battery charging and maintenance across multiple battery banks on boats and yachts. This intelligent relay automatically detects the voltage levels of different battery banks and connects them for charging when the main engine is running or an external charging source is active. This enhances battery performance and extends their lifespan by ensuring that all batteries receive an appropriate charge without overloading or undercharging, thereby contributing to efficient energy distribution and reliable power supply on marine vessels.
For secure installation and durable storage, pair this kit with a reliable Marine Battery Box.
In what scenarios is the BEP Marine 701 MD commonly utilized, and what specific features does it offer for marine applications?
The BEP Marine 701 MD is commonly employed in scenarios requiring reliable battery monitoring and management on boats and yachts. This advanced module offers features like voltage, current, and temperature sensing, making it a valuable tool for assessing battery health and performance. It aids in preventing battery overdischarge and overheating, ensuring optimal battery conditions and contributing to safer and more efficient marine operations.