Zipwake specializes in the development and manufacturing of dynamic trim control systems for boats and yachts. Their product consists of highly efficient interceptors that automatically adjust the trim and pitch of the vessel, ensuring stability, improved comfort, and fuel efficiency.
Zipwake systems minimize roll and maintain optimal balance of the boat in various conditions, which is especially important when navigating through waves or executing sharp maneuvers.
Zipwake offers two main types of systems: the Series S, designed for smaller boats and vessels up to 50 feet, and the Series E, tailored for larger ships up to 100 feet in length. Each system is equipped with highly sensitive sensors and intelligent electronics, allowing it to respond quickly to changes in the boat’s position and make adjustments for the smoothest ride possible. Zipwake systems provide an ideal combination of high performance and ease of use, significantly enhancing the vessel's overall handling characteristics..
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Zipwake offers two main types of systems: the Series S, designed for smaller boats and vessels up to 50 feet, and the Series E, tailored for larger ships up to 100 feet in length. Each system is equipped with highly sensitive sensors and intelligent electronics, allowing it to respond quickly to changes in the boat’s position and make adjustments for the smoothest ride possible. Zipwake systems provide an ideal combination of high performance and ease of use, significantly enhancing the vessel's overall handling characteristics..
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Zipwake Interceptor 600E Front is a crucial part of the Zipwake interceptor system, designed for optimal performance and durability, especially under unexpected impacts. It features a product number of 2012045, operates between -40°C to +90°C, and is made of black plastic with dimensions of 600 mm in width and 51 mm in depth. This product is certified with CE and FCC, and is sold as a single piece. |
$ 785.51
-
+
|
|
1-2 weeks delivery time The Zipwake straight 600E interceptor is engineered for optimal performance in larger boats, featuring a 600 mm width and a 3-meter cable for seamless installation. It boasts a blade speed of 40 mm/s for fast response, a 60 mm blade stroke for improved lifting efficiency, and a 2.8-inch display for enhanced visibility. Compatible with Series E interceptors, it supports boats up to 30 m (100 ft) and includes a new distribution expansion unit and a Dynamic Trim Control System for advanced automatic trim management while reducing drag with its tunnel-shaped design. |
$ 3,810.03
-
+
|
|
1-2 weeks delivery time The Zipwake Interceptor 600E Tunnel R500 Back Plate is a durable and reliable marine product designed for exceptional performance. It features a plastic construction, is certified by CE and FCC, and is part of the E series. This black back plate operates effectively in temperatures ranging from -40° to +90°C, with dimensions of 600 mm in width, 275 mm in height, and 29 mm in depth. Its versatility and strength make it an essential component for various marine applications. |
$ 1,059.62
-
+
|
|
1-2 weeks delivery time The Zipwake Interceptor 600E Tunnel R500 Front is a durable solution designed to enhance vessel performance and stability while minimizing damage from collisions. Made of plastic with a black finish, it operates in temperatures ranging from -40° to +90°C. This product includes the front housing, blade, auxiliary roller blade, mounting screws, and small parts for linear blade movement. Certified by CE and FCC, the interceptor's design aims to protect against floating debris collisions, ensuring longevity and reliability. |
$ 1,152.45
-
+
|
|
1-2 weeks delivery time The Zipwake IT600-E R500 tunnel interceptor is a 600 mm long device designed to improve the performance of vessels with propeller tunnels. With a 500 mm radius, it generates lift by utilizing areas above the propeller tunnel, making it suitable for various hull designs. Available for new installations or retrofitting, it features an operating temperature range of -40° to +90°C, is certified to IP68 protection class, and supports speeds up to 110 km/h (60 knots). The interceptor is compatible with most large ship propeller tunnels and is made of plastic with a black color, powered by 12/24 VDC. |
$ 5,065.78
-
+
|
|
1-2 weeks delivery time The Zipwake Interceptor 600E Tunnel R600 Back Plate is designed for optimal performance and durability in various marine applications, featuring a black plastic construction with CE and FCC certifications. It operates efficiently within a temperature range of -40° to +90°C and has dimensions of 600 mm in width, 255 mm in height, and 29 mm in depth. The Exalto product number is 2012085. |
$ 1,059.62
-
+
|
|
1-2 weeks delivery time The Zipwake 600E R600 Tunnel interceptor front plate, product number 2012049, is designed to improve the performance and longevity of your interceptor system while minimizing damage from floating debris. With an operating temperature range of -40°C to +90°C, this black plastic component measures 600 mm in width, 51 mm in depth, and 255 mm in height. It is sold as a single piece, and it carries CE and FCC certifications. |
$ 1,152.45
-
+
|
|
1-2 weeks delivery time The Zipwake IT600-E R600 Tunnel Interceptor is designed to enhance boat performance by providing optimal lift, measuring 600 mm in length with a radius of 600 mm, making it suitable for hulls with propeller tunnels. Its unique curved design allows for installation above the propeller tunnel, utilizing otherwise unused hull sections for lift generation. With three models available (R500, R600, and R800) to fit various vessel propeller tunnels, this product can be used for new installations or retrofitted to existing systems. Key specifications include an operating temperature range of -40° to +90°C, an IP68 protection class, and a product code of 2012022. |
$ 5,065.78
-
+
|
|
1-2 weeks delivery time The Zipwake Interceptor 600E Tunnel R800 Back Plate is a high-performance, durable product made from high-quality plastic, designed for reliable operation in extreme temperatures ranging from -40°C to +90°C. It measures 600mm in width, 132mm in height, and 29mm in depth, and is available in black. This product, which carries CE and FCC approvals, is part of the E series and has the product number 2012086. |
$ 1,059.62
-
+
|
|
1-2 weeks delivery time The Zipwake 600E R800 Tunnel interceptor front plate is a crucial component for optimal performance and protection of your interceptor unit. It features a product number of 2012050, operates within a temperature range of -40°C to +90°C, and is certified by CE and FCC. Made of black plastic, it measures 600 mm in width, 51 mm in depth, and 132 mm in height. This one-piece product, branded by Zipwake, is essential for your marine equipment setup. |
$ 1,152.45
-
+
|
|
1-2 weeks delivery time The Zipwake IT600-E R800 Tunnel Interceptor, designed to enhance vessel performance, features a length of 600 mm and a radius of 800 mm, allowing for effective lift generation above propeller tunnels. With a maximum speed of 110 km/h (60 knots) and a temperature range of -40° to +90°C, this interceptor is suitable for new installations or retrofitting in existing systems. It is IP68 rated, made of plastic, and comes with a 3-meter cable, certified by CE and FCC. The product dimensions are 600 mm in width, 80 mm in depth, and 233 mm in height, with an input voltage of 12 or 24 VDC. |
$ 5,065.78
-
+
|
|
1-2 weeks delivery time The Zipwake Interceptor 600S Back Plate (Product Number: 2011403) is a durable replacement part designed for the Zipwake Series S interceptors. It operates within a temperature range of -40°C to +90°C, is sold individually (excluding servo), and features a black plastic construction with dimensions of 600 mm in width, 15 mm in depth, and 115 mm in height. The product is certified with CE and FCC markings. |
$ 338.25
-
+
|
|
1-2 weeks delivery time The Zipwake Interceptor 600S Front is a high-performance replacement front plate designed for the 600S model. It operates within a temperature range of -40° to +90°C, features IP68 protection, and is made of durable plastic in black. This product, identified by the code 2011254, is certified with CE and FCC and has dimensions of 600 mm in width, 33 mm in depth, and 115 mm in height. |
$ 377.62
-
+
|
|
1-2 weeks delivery time The Zipwake 600S interceptor, with a width of 600 mm, includes a 3-meter cable and cable covers. It is part of a modular system designed for planing and semi-planing boats between 6 and 15 meters (20-50 ft). This durable and affordable product features shock-resistant components, a calibration-free electric servo unit, and natural water cooling for optimal performance. With a quick response time of 1.5 seconds, it significantly outperforms conventional trim tabs and offers easy installation options. |
$ 1,433.88
-
+
|
|
1-2 weeks delivery time The Zipwake Interceptor 750S Back Plate (Product Number: 2011404) is a durable replacement component for the 750S model, featuring a black plastic design that operates between -40°C and +90°C. It is sold individually, excludes the servo, and is CE and FCC certified. With dimensions of 570 mm in width, 15 mm in depth, and 175 mm in height, it ensures optimal performance and reliability. |
$ 366.79
-
+
|
|
1-2 weeks delivery time The Zipwake Interceptor 750S Front Plate serves as a replacement for the front panels of the 750S series. It operates in extreme temperatures from -40°C to +90°C and features an IP68 protection class. With a sleek black plastic design, it measures 570 mm in width, 33 mm in depth, and 175 mm in height. The product is certified with CE and FCC and is identified by the product number 2011255. |
$ 448.87
-
+
|
|
1-2 weeks delivery time The Zipwake straight 750S interceptor features a width of 750 mm and includes a 3-meter cable with covers for easy installation. Part of a modular series with four sizes available, it is designed for planing or semi-planing boats between 6 and 15 meters (20-50 ft). This durable interceptor is built to withstand shocks and prevent water ingress, ensuring minimal maintenance. It operates via a calibration-free electric servo unit, has a quick response time of 1.5 seconds, and is easy to install with various cable entry options. |
$ 1,756.28
-
+
|
|
1-2 weeks delivery time The Zipwake Interceptor 800E Back Plate is a durable replacement component designed for the Interceptor 800E, excluding the servo. It operates within a temperature range of -40°C to +90°C and is sold individually. Key specifications include a width of 800 mm, depth of 29 mm, height of 175 mm, and it comes in black plastic. The product is certified with CE and FCC and has an EAN code of 8720193028729. |
$ 1,190.03
-
+
|
What is the main function of Zipwake interceptors in a boat's trim control system?
Zipwake interceptors are fast-acting devices installed along the boat's transom to dynamically adjust the vessel's trim, enhancing performance, fuel efficiency, and passenger comfort. Unlike conventional trim tabs, Zipwake's interceptors deploy vertically, allowing for quicker and more precise adjustments to the boat's pitch and roll. The system is fully automatic, utilizing advanced 3D controls to optimize running trim, thereby minimizing wave resistance and improving overall handling.
Zipwake Series interceptors are designed for seamless integration, featuring an intuitive control panel that allows for real-time adjustments to the vessel's trim. The system's fast response time—taking only 1.5 seconds for actuation—ensures optimal performance in various sea conditions. Actuation takes place by way of a calibration-free submersible electric servo, making operation precise and efficient. Installation is made easy with an integral mounting plate and the option of a concealed thru-hull cable fitting, reducing complexity. Each interceptor comes with a practical drill template for accurate placement, and the self-sealing design enhances durability in marine environments. Supported by Imtra, this product family provides a reliable trim control solution for both inboard and outboard vessels.
How does the Zipwake Trim Control System improve fuel efficiency?
Zipwake Trim Tabs provide automatic and precise trim adjustments in varying sea conditions, enhancing comfort and safety. The system’s fast-acting interceptors and gyro sensors continuously optimize the boat’s running angle, reducing pitch and roll for a smoother ride. With a state-of-the-art motion controller and a calibration-free submersible electric servo, the system ensures efficient performance, improved fuel economy, and better stability in rough waters.
What are the benefits of using Zipwake Trim Tabs in varying sea conditions?
Zipwake dynamic trim control system enhances stability and fuel efficiency by automatically adjusting the boat’s trim in varying sea conditions. The fast-acting interceptors, including four straight and four v-shaped options, ensure smooth adjustments with a blade stroke. The system's calibration-free submersible electric servo within the interceptor unit allows for precise control, improving handling and comfort in semi-planing and high-speed vessels.