ZF Gearboxes, a brand under ZF Friedrichshafen AG, was established in 1915 in Friedrichshafen, Germany. With over a century of existence, ZF has solidified its reputation as a global leader in driveline and chassis technology as well as active and passive safety technology.
ZF Gearboxes offers a comprehensive range of highly efficient gearbox solutions suitable for a myriad of applications, including marine, automotive, and heavy industries. The brand is synonymous with advanced technology, superior quality, and exceptional performance, underpinning its commitment to innovation, sustainability, and customer satisfaction. ZF Gearboxes continues to set new standards in its field, providing reliable, durable, and efficient solutions worldwide.
Expanding the possibilities of what gearboxes can achieve, ZF Gearboxes continues to explore new market opportunities that would further elevate their technological leadership. This strategic focus ensures that ZF not only meets but exceeds the evolving needs of a dynamic global market, reinforcing their commitment to delivering top-tier solutions across various industries.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Expanding the possibilities of what gearboxes can achieve, ZF Gearboxes continues to explore new market opportunities that would further elevate their technological leadership. This strategic focus ensures that ZF not only meets but exceeds the evolving needs of a dynamic global market, reinforcing their commitment to delivering top-tier solutions across various industries.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The ZF 3315199003 is a complete seal and clutch kit for ZF 25 and ZF 25A marine gearboxes. Includes seal kit with piston rings, 6 inner discs, 8 outer discs, butting rings, snap rings, retainer rings, and more. Made of corrosion-resistant materials for marine use. Designed to prevent leaks, restore clutch function, and extend gearbox life. Temperature range: -20°C to 80°C. Weight: 1.5 kg. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 3315201001 Strainer Filter is a corrosion-resistant filter for ZF45C, ZF63C, and ZF88C gearboxes. Features >95% separation efficiency, compatible with diesel and biodiesel. Operating temperature: -20°C to +65°C. Differential pressure: 250 mbar (paper), 700 mbar (steel). Flow rate: 30 L/min at 3 bar. Port sizes: 3/8" BSP oil, 32 mm water. Dimensions: 120×80×50 mm. Weight: 1.2 kg. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 3315316004 is a CENTA CF-R-94 torsional coupling for ZF30M gearboxes and Yanmar JH engines. Torque capacity: 600 Nm. Dimensions: Ø220 × 150 mm. Weight: 6.5 kg. Reduces torsional vibrations, noise, and wear. Corrosion-resistant design for marine use. Operating temperature: -20°C to +70°C. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 3316116001 is an SAE 3 adapter housing for ZF 45A, ZF 63, ZF 63A, and ZF 63IV gearboxes. Made of corrosion-resistant aluminum alloy. Torque capacity: 500 Nm. Pressure rating: 300 psi. Temperature range: -29°C to +82°C. Weight: 8.5 kg. Features vibration dampening and high load capacity for marine use. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 3320107001 is a side-mount oil cooler for ZF 30M marine transmissions. Flow rate: 40 L/min. Oil ports: 3/8" BSP. Water port ID: 32 mm. Operating temperature: up to 85°C. Pressure: 150 psi. Compact, corrosion-resistant design. Made in Italy. Shipping weight: 5 lbs. |
Our managers will contact you and clarify the terms of the order
|
|
ZF 3321199016 – Gasket Kit for ZF Marine Transmissions 63/80/85/150 Series, 12-Piece, -40°F to 300°F
1-2 weeks delivery time The ZF 3321199016 Gasket Kit includes 12 precision-cut gaskets for ZF 63, 80, 85, and 150 marine transmissions. Made of corrosion-resistant rubber/metal composite. Operating temperature: -40°F to 300°F. Pressure rating: 150 psi. Ensures leak-free sealing in marine environments. Weight: 1.5 lbs. |
$ 171.21
-
+
|
|
1-2 weeks delivery time The ZF 3323199023 Seal & Clutch Kit is a complete service kit for ZF IV85 marine gearboxes. Includes fins, piston rings, gaskets, and clutch seals. Pressure rating: 15 bar (217 psi), temperature range: -20°C to 120°C. Corrosion-resistant. Weight: approx. 0.7 kg. Ensures leak-free operation and gearbox longevity. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 3329199017 is a 2-piece zinc anode kit for ZF SD10 and SD12 Saildrives (part no. 511034). Designed for corrosion protection in salt and freshwater. Each anode weighs 1.5 lbs and fits the latest SD10/12 models. Simple installation. Replace annually to maintain system integrity. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 3329199018 is a magnesium anode for ZF SD10 and SD12 Saildrives. Ideal for corrosion protection in salt, brackish, and freshwater. Measures approx. 150×85×30 mm, weighs 0.9 kg. Lasts 1–2 years depending on water conditions. Direct-fit, easy installation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 408388 is a corrosion-resistant control block basket for ZF marine transmissions (ZF 10, 12, 15, etc.). Ensures optimal fluid flow and pressure stability. Dimensions: 180×120×80 mm. Rated for 30 bar pressure. Weight: 2.3 kg. Direct-fit design for easy installation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 500149 is a high-efficiency filter insert for ZF45C, ZF63C, and ZF88C marine transmissions. Rated 99.98% efficient at 10 microns, it ensures clean fluid flow at 30–50 L/min. Dimensions: Ø160×130 mm. Operating range: -30°F to 250°F. Replace every 500 hours. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 500423 is a complete seal kit for ZF63IV, ZF63V, and HSW630V gearboxes. Includes shaft seals, piston rings, gaskets, and O-rings. Designed for full gearbox maintenance to prevent oil leaks and pressure loss. Made from marine-grade elastomeric materials. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 500427 is a complete gasket and seal kit for ZF10M and HBW100 marine gearboxes. Includes shaft seals, O-rings, and gaskets for input/output shafts, drain plug, and cover. Made from marine-grade materials for leak prevention and gearbox longevity. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 500428 is a complete gasket and seal kit for HBW10, HBW150, ZF 12M, 15M, and 15MA marine gearboxes. Includes input/output shaft seals, cover gaskets, and O-rings. Made from marine-grade elastomers for oil leak prevention and long service life. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 500430 gasket and seal kit fits HBW 20, HBW 250, ZF 25M, and ZF 25MA gearboxes. Includes shift cover, drain plug, input/output shaft seals, and cover gaskets. Replaces ZF 947.52.630.01 and DriveForce 107615. Built for leak-free marine performance. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 500881 is a corrosion-resistant pump nozzle with gaskets for ZF fuel injection and hydraulic systems. Features precision fluid delivery, operating up to 150 PSI. Includes heat-resistant seals. Dimensions: 120×25×12 mm. Ideal for marine and industrial use. |
$ 3,252.84
-
+
|
|
1-2 weeks delivery time The ZF 501003527 is a marine oil cooler for ZF transmissions, rated for 180°F (82°C) and 7 bar (101.5 psi). Ensures optimal oil temperature with a flow rate of 2.0 L/min. Dimensions: 39.1×25.9×10.4 cm. Corrosion-resistant and easy to install with brackets. |
$ 12,310.95
-
+
|
|
1-2 weeks delivery time The ZF 501175 Gasket & Seal Kit is a complete overhaul set for ZF 63A and Hurth HSW 630A gearboxes. Includes input/output shaft seals, O-rings, piston rings, and gaskets. Replaces ZF 3312 199 017 and 978.27.634.02. Made from marine-grade materials for durability and leak protection. |
Our managers will contact you and clarify the terms of the order
|
What electronic components are integrated into ZF Marine Gearboxes for enhanced functionality?
ZF Marine Gearboxes are equipped with advanced electronic components designed to enhance functionality and optimize performance. These components may include electronic control units (ECUs) that regulate engine speed, clutch engagement, and gear shifting for seamless operation. Additionally, some ZF Marine Gearboxes feature electronic sensors and monitoring systems to provide real-time data on oil temperature, pressure, and gearbox status, ensuring smooth and efficient drive operation. By integrating these electronic elements into their gearbox designs, ZF Marine ensures compatibility with a wide range of engine models and vessel types, including hybrid propulsion systems and crew boats designed for high-activity operations.
Are there any specific design features in ZF Marine Gearboxes that enable continuous operation in demanding marine environments?
ZF Marine Gearboxes are designed for use in demanding marine environments, featuring a robust product range that ensures continuous operation. The gearboxes are equipped with high-strength, lightweight materials and a unique cooling system to handle long durations of activity without overheating. Each series is compatible with a variety of propeller and shaft configurations, making them a versatile choice for any marine application. Please contact us for more details on how our ZF Marine products can meet your specific needs.
How do the materials used in ZF Marine Gearboxes contribute to their durability and performance?
The materials used in ZF Marine Gearboxes are selected to ensure high durability and optimal performance, enabling them to operate continuously in demanding marine conditions. These materials include high-grade alloys and advanced composites that withstand extreme mechanical stresses and corrosive environments. The rigorous material selection process is integral to the market-leading performance of ZF gearboxes, drawing from continuous research and development to enhance their robustness and longevity.