Expanding the possibilities of what gearboxes can achieve, ZF Gearboxes continues to explore new market opportunities that would further elevate their technological leadership. This strategic focus ensures that ZF not only meets but exceeds the evolving needs of a dynamic global market, reinforcing their commitment to delivering top-tier solutions across various industries.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The ZF 3205302069 Thrust Washer is a 0.2 kg precision washer for ZF marine transmissions. Made of corrosion-resistant alloy steel, it measures Ø100 x 5 mm and ensures optimal load distribution under high mechanical stress. Features low-friction surface and vibration resistance. Operating range: -20°F to 200°F. |
$ 19.65
-
+
|
|
1-2 weeks delivery time The ZF 3207107041 Oil Cooler is a 12 lb aluminum unit for ZF 280-1A transmissions. Features 1” BSP connections, max pressure 10 bar, and 50 L/min flow. Designed for saltwater and freshwater use. Dimensions: 18" x 10" x 6". Operating range: -20°F to 180°F. |
$ 1,574.37
-
+
|
|
1-2 weeks delivery time The ZF 3207306002 Support Oil Pump is a 3.5 lb corrosion-resistant unit for ZF 220 and ZF 280 marine transmissions. Maintains oil pressure up to 90 psi (6.2 bar) to prevent overheating and wear. Dimensions: 12" x 8" x 6". Operating range: -20°F to 180°F. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 3209199037 Housing Adapter SAE 3 is a corrosion-resistant steel interface for Yanmar 6CX engines. Ensures precise engine-to-gearbox alignment with included spacer. Withstands up to 300 PSI and operates from -40°F to 185°F. Dimensions: 8.5" x 6.5" x 3". |
$ 1,781.41
-
+
|
|
1-2 weeks delivery time The ZF 3209204015 Shaft and Gear T = 43 is a precision-machined 15 lb steel component for ZF marine transmissions. Optimizes speed-torque balance with a T = 43 gear ratio. Handles up to 15 kNm torque. Dimensions: 22" x 3". Operating range: -40°F to 200°F. |
$ 4,777.05
-
+
|
|
1-2 weeks delivery time The ZF 3209206006 Oil Pump is a corrosion-resistant 2.5 kg electric pump for ZF285A gearboxes. Delivers 20 L/min at 3 bar pressure. Operates from -10°C to 100°C. Compact size: 240×160×130 mm. Ensures reliable gearbox lubrication in marine environments. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The ZF 3209304070 Plate is a corrosion-resistant 5.5 lb mounting plate for ZF 220, 280, and 280A marine transmissions. Made from high-strength steel, it supports smooth power transfer and reduces vibration. Dimensions: 8" x 8" x 1". Operating range: -20°F to 140°F. |
$ 3.98
-
+
|
|
1-2 weeks delivery time The ZF 3214118001 Rigid Brackets are corrosion-resistant mounting supports for ZF 220 and 280-1A transmissions. Built from marine-grade steel with powder coating, they reduce vibration and ensure precise gearbox alignment. Dimensions: 120 x 80 x 90 mm. Operating range: -20°F to 140°F. |
$ 529.54
-
+
|
|
1-2 weeks delivery time The ZF 3215199065 Oil Pump Kit is a corrosion-resistant lubrication unit for IRM350 transmissions. Ensures stable oil flow, prevents overheating, and extends gearbox life. Operating range: -20°F to 140°F. Includes all components for direct-fit installation. |
$ 960.88
-
+
|
|
1-2 weeks delivery time The ZF 3215199511 Bearing Kit is a corrosion-resistant replacement set for IRM350/350-1 transmissions. Includes all key bearings to restore smooth operation and reduce wear. Handles up to 35 bar, temperature range: -20°F to 180°F. |
$ 5,551.28
-
+
|
|
1-2 weeks delivery time The ZF 3215302023 Thrust Washer is a 0.15 kg steel component for ZF marine transmissions. Designed for high loads up to 2000 Nm and 150 bar. Rockwell hardness 55–60 HRC. Temperature range: -30°C to 120°C. |
$ 347.73
-
+
|
|
1-2 weeks delivery time The ZF 3216093001 is a 4.5 kg PTO mounting kit for SAE-J-744BPAD systems. Built from corrosion-resistant alloy, rated up to 300 bar and 500 Nm. Includes vibration-dampening pads. Temp. range: -40°C to +80°C. Noise level: <65 dB(A). |
$ 2,777.79
-
+
|
|
1-2 weeks delivery time The ZF 3216199512 is a 2.0 kg repair kit for ZF 4HP, 5HP, and 6HP transmissions. Includes seals, gaskets, washers, bearings, and O-rings. Operates from -30°C to +100°C. Corrosion- and vibration-resistant for marine and industrial use. |
$ 3,161.68
-
+
|
|
1-2 weeks delivery time The ZF 3216199514 is a 0.8 kg repair kit for ZF 63A and ZF 63IV gearboxes. Includes seals, O-rings, and gaskets made of corrosion-resistant materials. Withstands up to 250 psi and operates in -29°C to +121°C. Ideal for marine maintenance and leak prevention. |
$ 230.42
-
+
|
|
1-2 weeks delivery time The ZF 3216302031 Feder is a 0.3 kg compression spring for ZF 360 and ZF 500 marine transmissions. Made from corrosion-resistant high-strength steel, it supports loads up to 2000 N. Ensures smooth shifting and long-term reliability in saltwater environments. Dimensions: 120 × 15 × 5 mm. Operating range: -20°C to +80°C. |
$ 135.12
-
+
|
|
1-2 weeks delivery time The ZF 3217107017 Oil Cooler is a 2.5 kg corrosion-resistant unit for ZF550V marine gearboxes. Handles up to 300 psi pressure and operates from -29°C to +121°C. Compact size: 31.75 × 12.7 × 10.2 cm. Ensures stable oil temperature and protects transmission in saltwater environments. |
$ 3,049.54
-
+
|
|
1-2 weeks delivery time The ZF 3217108018 MB30-1 is a compact (200 × 120 × 80 mm), lightweight (0.11 kg) mechanical control valve for ZF marine transmissions. Operates at 10–20 bar and from -10°C to +80°C. Ensures precise fluid regulation and smooth shifting in recreational and commercial vessels. |
$ 2,136.76
-
+
|
|
1-2 weeks delivery time The ZF 3217208006 MB30-1 is a 1.4 kg mechanical control valve for marine and industrial systems. Operates from 20 bar to +1 bar, supports up to 60 L/min flow. Corrosion-resistant, compact (150 × 80 × 60 mm), with operating range from -30°C to +120°C. Suitable for vertical or horizontal mounting. |
$ 2,182.56
-
+
|
What electronic components are integrated into ZF Marine Gearboxes for enhanced functionality?
ZF Marine Gearboxes are equipped with advanced electronic components designed to enhance functionality and optimize performance. These components may include electronic control units (ECUs) that regulate engine speed, clutch engagement, and gear shifting for seamless operation. Additionally, some ZF Marine Gearboxes feature electronic sensors and monitoring systems to provide real-time data on oil temperature, pressure, and gearbox status, ensuring smooth and efficient drive operation. By integrating these electronic elements into their gearbox designs, ZF Marine ensures compatibility with a wide range of engine models and vessel types, including hybrid propulsion systems and crew boats designed for high-activity operations.
Are there any specific design features in ZF Marine Gearboxes that enable continuous operation in demanding marine environments?
ZF Marine Gearboxes are designed for use in demanding marine environments, featuring a robust product range that ensures continuous operation. The gearboxes are equipped with high-strength, lightweight materials and a unique cooling system to handle long durations of activity without overheating. Each series is compatible with a variety of propeller and shaft configurations, making them a versatile choice for any marine application. Please contact us for more details on how our ZF Marine products can meet your specific needs.
How do the materials used in ZF Marine Gearboxes contribute to their durability and performance?
The materials used in ZF Marine Gearboxes are selected to ensure high durability and optimal performance, enabling them to operate continuously in demanding marine conditions. These materials include high-grade alloys and advanced composites that withstand extreme mechanical stresses and corrosive environments. The rigorous material selection process is integral to the market-leading performance of ZF gearboxes, drawing from continuous research and development to enhance their robustness and longevity.