Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Whale AS0556 piston and spring service kit is a component set for servicing the piston and spring mechanism in Whale Gusher Galley Mk.3 pumps. The kit includes 1 piston, 1 operating spring, 1 clamping cup, 1 clamping plate, 1 sealing washer, 1 M6 screw, and 1 M6 nut; packaging unit: piece. Suitable for models GP0550 and GP0551; article number: 17540056. |
$ 40.91
-
+
|
|
1-2 weeks delivery time The Whale AS0561 service kit is a genuine diaphragm plate and pivot arm kit for maintenance and repair of Whale Henderson MK5 pumps. The listed contents include 1 pivot arm, 2 diaphragm plates, 1 rocker arm nut, and 2 small circlips; it is also referenced as a clamp plate kit for Mk5 pumps with 1 clamping nut, 1 inner clamping plate, 1 outer plate, and 1 clamping screw. Article number: 17540047; manufacturer number: AS0561; shipping weight: 0.40 kg. |
$ 69.08
-
+
|
|
1-2 weeks delivery time The Whale AS1562 clamping ring replacement kit is designed to secure and clamp components on Whale Gulper pumps. The kit includes two clamp ring halves and two screws, has Article Number 17540057 and Manufacturer Number AK1562, and is specified to fit the Gulper 220. Listed compatibility includes Whale Gulper 220 pumps (BP1552, BP1554), Gulper 320 pumps (BP2052, BP2054), Gulper toilet waste pumps (BP2552B, BP2554B), and Gulper Grouper fishbox discharge pumps (BP4574, BP4672); shipping weight is 0.30 kg. |
$ 32.92
-
+
|
|
1-2 weeks delivery time The Whale AS3014 clamping plate kit is a clamp plate replacement set for Whale Gusher 30 pumps, designed to secure pump components for a stable setup. The kit includes 2 inner clamping plates, 2 outer plates, 2 clamping screws, and 2 buffers; article number 17540080. Listed shipping weight: 0.50 kg. |
$ 151.51
-
+
|
|
1-2 weeks delivery time The Whale lever assembly kit is a complete lever component set designed for the Whale Gusher 30 manual bilge pump. Manufacturer number AS3015 (article number 17540058), the kit includes the lever and associated hardware such as inserts, bushes, buffers, nuts, screws, bolts, and a connecting rod. Listed shipping weight is 0.70 kg. |
$ 306.72
-
+
|
|
1-2 weeks delivery time The Whale AS3020 conversion assembly is a through-deck deck plate conversion kit for adapting Whale Gusher 30 pumps to deck plate installation. It is listed as article/item number 17540059 (manufacturer number AS3020) and includes a deck plate with lid (metal), sealing components (O-ring/seal), gaiter/bellows, an underdeck bracket and mounting attachment, plus M6 fasteners (nuts, screws, and washers). Shipping weight is 1.30 kg. |
$ 230.96
-
+
|
|
1-2 weeks delivery time The Whale AS3095 handle and insertion lever assembly is a stainless-steel operating handle designed for Whale Gusher 30 pumps. It has a length of 450 mm, includes a safety line, and is listed with article number 17540081; shipping weight is 0.80 kg. |
$ 148.67
-
+
|
|
1-2 weeks delivery time The Whale AS3719 clamp plate and eyebolt assembly kit is a replacement hardware set for Whale Gusher 10 bilge pumps, including Gusher 10 MK2 and MK3 variants. It is supplied as a kit with 2 clamping plates, 1 nut, 1 fulcrum bush, 1 eyebolt, 1 buffer, and 1 label; article number 17540060, shipping weight 0.30 kg. |
$ 156.81
-
+
|
|
1-2 weeks delivery time The Whale AS3723 outlet valve plate assembly is a replacement valve plate kit for Whale Gusher 10 bilge pumps, used to regulate fluid flow and maintain proper valve functionality. It is specified for Gusher 10 models including BP3708 and BP3740, and includes a valve plate, gasket, valve, bridge piece, and screws. Article number: 17540082; shipping weight: 0.30 kg. |
$ 117.40
-
+
|
|
1-2 weeks delivery time The Whale protective gaiter kit is designed to maintain a secure seal around deck plates in marine installations. Manufacturer number AS3725 (article number 17540061), it is compatible with Whale DP8904, DP3804, DP9906, and AS3020 cover plates for the Whale Gusher 10, Whale Gusher 30, Whale Gusher Urchin, Whale Gusher Titan, Whale/Henderson Mk5 Universal, and Whale/Henderson Mk5 Chimp pumps. Shipping weight: 0.30 kg. |
$ 25.94
-
+
|
|
1-2 weeks delivery time The Whale AS3780 fork assembly is a genuine replacement kit for Whale Gusher 10 pump models, intended to support stable and secure pump operation during maintenance or repair. The kit includes 1 fork, 1 insert fork, 2 bolts, 2 fulcrum sleeves, 2 nuts, 4 washers, and 2 fulcrum bushes; article number 17540083. Shipping weight: 0.50 kg. |
$ 208.30
-
+
|
|
1-2 weeks delivery time The Whale AS4406 lever service kit is designed for Whale Gusher Titan manual pumps to restore lever operation with the turndown function. The kit includes a pump lever head, 1 standard operating lever, 4 circlips, 2 lever fulcrum pins, and 2 locking bolts; listed article number is 17540084 and shipping weight is 0.40 kg. |
$ 50.59
-
+
|
|
1-2 weeks delivery time The Whale AS4407 standard clamping ring kit is a replacement component for the Whale Gusher Titan pump, intended to support secure assembly and proper sealing. The kit includes 2 clamping rings, 2 nuts, and 2 bolts; article number 17540063, shipping weight 0.60 kg. |
$ 89.82
-
+
|
|
1-2 weeks delivery time The Whale AS4409 underdeck clamping ring kit is designed for thru-deck/underdeck mounting and is compatible with the Whale Gusher Titan pump, including the Whale BP4410 Gusher Titan manual bilge pump. The kit includes an underdeck clamping ring, a top clamping ring, 2 nuts, 2 screws (bolts), 4 circlips, and 4 inserts for the underdeck clamping ring; article number 17540064 and shipping weight 1.00 kg are provided. |
$ 115.77
-
+
|
|
1-2 weeks delivery time The Whale AS4412 clamping plate kit is a replacement mounting and clamping component set for the Whale Gusher Titan pump, designed to provide secure support during installation. It includes inner and outer clamping plates, a clamping nut, a clamping bolt/screw, and four circlips; article number 17540065, shipping weight 0.30 kg. |
$ 61.47
-
+
|
|
1-2 weeks delivery time The Whale AS5020 replacement mixer tap outlet is a white short spout designed for Whale Elegance combo mixer taps. It uses a 12 mm male stem connection for straightforward replacement and is listed as article number 17540066 (manufacturer number AS5020, described as “Assy Combo Tap Outlet White”). Compatible models include RT1010, RT2007, RT2010, RT2035, RT2498, RT2500, RT7010, and RT7007. |
$ 42.33
-
+
|
|
1-2 weeks delivery time The Whale AS5122 upgrade kit is a white control knob set for Whale Elegance taps and deck shower setups, providing cold and hot water control using Elegance series components. The kit includes 2 control knobs, 1 blue O-ring, 1 red O-ring, and 2 drive spindles, and is listed under item/article number 17540067. |
$ 48.15
-
+
|
|
1-2 weeks delivery time The Whale AS5123 combo handset is a white replacement spout and shower handset for select Whale Elegance showers, designed for ergonomic water control. It uses a 12 mm connection and is constructed from marine-grade materials with a white acetal spout and neoprene seal. Article number: 17540068; manufacturer number: AS5123. |
$ 72.93
-
+
|
What are the primary uses of a Whale Bilge Pump and Pressure Pumps in marine applications?
Whale bilge pumps, such as the Whale Gusher and Whale Supersub, are primarily used in marine applications to remove excess water from the bilge, ensuring the boat remains buoyant and safe. These pumps, including manual models like the Whale Gusher Titan Manual and electric options like the Whale Gulper 320 High Capacity, are essential for preventing water accumulation that can lead to instability or damage. Additionally, Whale Marine offers a range of replacement parts and pump service kits to maintain the efficiency and longevity of these vital systems, supporting various marine needs from sanitation to groundwater purging.
Whale water pumps also include specialized options like the Supersub bilge pump, Super Purger, and sanitation pumps designed for various marine applications. The Whale Quick Connect system and 12-volt automatic bilge pumps, such as the Whale Gulper Grouper MK 3, ensure reliable operation. Models like the MK 3 Manual and Whale Supersub Smart are designed for specific tasks like fishbox discharge and toilet pumping. The Whale Gusher 10 Manual and Whale Watermaster Automatic Pressure Pump are ideal for more demanding tasks, with the Gusher Galley and Titan Manual Pump making outdoor living easy and enjoyable. Whale's low voltage pumps, such as the Whale Orca, Whale Flipper, and Whale V pumps, offer versatile solutions for boats and RVs. With systems designed for easy maintenance and a wide range of applications, Whale pumps like the Gusher Galley MK 3 and electric field sensor models ensure optimal performance. Whale service kits and replacement parts, such as the Whale BP0510 MK5 Universal and AK4615 Babyfoot® Service Kit, support long-term use and reliability.
How does the Whale Foot Pump, MK3 Manual Pump and MK5 Universal Manual Pump operate in a boat's galley
The Whale foot pump operates in a boat's galley by providing a manual method to draw water from a tank to the sink, ensuring reliable water flow without the need for electricity. This type of galley pump, like the Whale Gusher urchin manual, is especially useful for boats without pressure pumps or when conserving battery power. The foot pump's simple design and durability make it an excellent choice for maintaining water and heating systems, enhancing convenience and functionality in the galley.
Additionally, the Whale foot pump's efficient design allows it to be used alongside other Whale water systems, such as the Whale Supersub bilge pump, Super Purger, and sanitation pumps, ensuring a cohesive and reliable water management system. The Whale Quick Connect system further simplifies installation and maintenance, while the low voltage and manual operation make it an energy-efficient option. With products like the Whale BP0510 MK5 Universal service kit and the Whale Gusher 10 MK3 manual bilge pump, maintaining the foot pump and other Whale systems is straightforward and hassle-free, making them ideal for both small boats and larger vessels.
What are the main applications of the Whale Gusher 10 Water Pump on boats?
The main applications of the Whale Gusher water pump on boats include bilge pumping, waste management, and freshwater transfer. The Whale Gusher pumps, such as the Gusher 10 and Gusher urchin manual bilge pumps, are highly reliable for removing water from the bilge area, ensuring the safety and stability of the vessel. Additionally, the Whale Gulper Grouper pumps are specifically designed for handling waste discharge, while the MK5 universal manual pump is versatile for various onboard water management tasks. These pumps are essential components in a pump kit for maintaining effective water and waste systems on boats.
Furthermore, Whale Gusher pumps, including the 12 volt fishbox discharge pump and Whale Gulper toilet pump, provide solutions for various specific needs on a boat. The MK3 Gusher Titan manual pump and Whale GP0550 electric bilge pump enhance functionality, ensuring that the vessel's water systems operate smoothly. Whale makes outdoor living easy with products like the Super Purge and Accumulator pump, offering reliable performance in different applications. Quick Connect plumbing and service kits, such as the MK3 manual and MK5 manual pumps, facilitate maintenance and integration of water systems designed for mobile applications, ensuring an enjoyable boating experience. Whether for shower and sink water management or waste discharge with the Gulper 220 shower pump, Whale pumps, like the Gusher Galley MK2, provide versatile and dependable solutions.