Discover Victron Energy: A Leader in Reliable Power Solutions for Marine and Off-Grid Use
Explore the extensive range of Victron Energy products available at our site. As an authorized dealer, we proudly offer everything from robust 120v power systems to advanced lithium battery solutions. Our online shop features a comprehensive selection of Victron products, each designed to meet the rigorous demands of marine and off-grid environments. Discover reliable power conversion equipment that leads the industry in efficiency and sustainability. Whether you're a seasoned sailor or a cabin owner, our expert team is here to help you find the perfect Victron Energy setup for your specific needs.Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time Pair of VE.Can RJ45 terminators for correctly terminating VE.Can networks. Required at both ends of the VE.Can communication chain. Supplied as a set of two. Essential for proper CAN-bus operation and included with some Victron products such as CANUSB. |
€ 11,22
-
+
|
|
1-2 weeks delivery time Interface for integrating VE.Bus devices (such as Multis, Quattros, or Inverters) with a VE.Can network. Enables data exchange between VE.Bus systems and GX devices via VE.Can, simplifying system monitoring and control through VRM. |
€ 169,42
-
+
|
|
1-2 weeks delivery time Inverting remote on-off cable for Victron Phoenix Inverters (12/180, 24/180, 12/350, 24/350, and 48/350), compatible with VE.Bus BMS and MPPT chargers like 75/15 or 100/15. Enables active pull-down control where source signal is high when switching on is needed. Max input/output 70V. |
€ 17,95
-
+
|
|
1-2 weeks delivery time Non-inverting remote on-off cable for connecting Skylla-TG chargers and discontinued Battery Protect BP40i/BP60i/BP200i to the VE.Bus BMS. Converts remote signal logic to suit connected devices. Max voltage: 70V, pull-down current: ~30mA. |
€ 17,95
-
+
|
|
1-2 weeks delivery time The Victron Energy ASS030550320 VE.Direct Non-Inverting Remote On/Off Cable enables remote control of BlueSolar and SmartSolar MPPT charge controllers. It activates the charger when the signal is high and disables it when the signal is low or floating. This cable is ideal for small MPPT models without onboard Remote On/Off terminals and is not compatible with GX devices or Bluetooth dongles on the same VE.Direct port. |
€ 22,44
-
+
|
|
1-2 weeks delivery time The Victron Energy ASS030510120 cable enables integration between the VE.Bus BMS and the Smart BMS 12/200, activating alternator charge control in lithium battery systems. This connection allows the BMS 12/200 to regulate alternator current and stop charging during battery alarms, offering an added layer of safety for both the alternator and the battery. The setup is ideal for protecting sensitive lithium systems while using Victron’s coordinated battery management components. |
€ 37,03
-
+
|
|
1-2 weeks delivery time The Victron Energy Skylla-i Remote On-Off Cable (ASS030550400) enables precise control of Skylla-i chargers by external devices like the VE.Bus BMS. It activates the charger when the control signal is high and disables it when the signal is low or floating, ensuring optimal battery protection and automated system integration. |
€ 28,05
-
+
|
|
1-2 weeks delivery time The Victron Energy RJ45 Splitter (ASS030065510) allows for convenient expansion of VE.Bus communication by splitting a single RJ45 port into two. With one male and two female RJ45 connectors on a 15 cm cable, it's ideal for connecting MultiPlus 500VA–1600VA units in parallel or three-phase setups and other installations requiring multiple VE.Bus ports. |
€ 22,44
-
+
|
|
1-2 weeks delivery time The Victron Energy AC Current Sensor (CSE000100000) is a compact external sensor designed to monitor AC current, apparent power, and energy output of PV inverters when connected to Multi or Quattro inverter/chargers. With support for up to 9 sensors per system and compatibility with VE.Bus-connected GX devices, it ensures accurate real-time solar yield data both locally and on the VRM portal. |
€ 58,34
-
+
|
|
1-2 weeks delivery time The Victron Energy CTR110000500 is a 100A:50mA current transformer designed for MultiPlus-II and MultiGrid-II inverters. It enables advanced features like PowerControl and PowerAssist and helps optimize self-consumption by providing external current sensing. The 1-meter cable length ensures easy and efficient integration with your Victron system. |
€ 39,27
-
+
|
|
1-2 weeks delivery time The Victron Energy CTR110000550 is a 100A:50mA current transformer with a 5-meter cable, designed for use with MultiPlus-II and MultiGrid-II inverters. It enables PowerControl and PowerAssist features while enhancing self-consumption by providing precise external current sensing. Ideal for installations requiring flexible sensor placement. |
€ 44,88
-
+
|
|
1-2 weeks delivery time The Victron Energy CTR110002050 is a 100A:50mA current transformer with an extended 20-meter cable, designed for MultiPlus-II and MultiGrid-II inverter/chargers. It enables PowerControl and PowerAssist functions and improves energy self-consumption by providing accurate external current sensing — ideal for long-distance installations. |
€ 79,66
-
+
|
|
1-2 weeks delivery time The Victron Energy CTR120000500 is a 100A:50mA current transformer with a 1-meter wire-end cable, designed for use with MultiPlus-II and MultiGrid-II inverters. This external current sensor enables PowerControl and PowerAssist functionalities, helping to optimize self-consumption and protect energy systems through precise load monitoring. |
€ 39,27
-
+
|
|
1-2 weeks delivery time The Victron Energy CTR120000550 is a 100A:50mA current transformer with a 5-meter wire-end cable, designed for use with MultiPlus-II and MultiGrid-II inverters. This sensor enables PowerControl and PowerAssist functionalities, helping optimize system self-consumption and prevent input overload by monitoring external current with precision. |
€ 44,88
-
+
|
|
1-2 weeks delivery time The Victron Energy CTR120002050 is a 100A:50mA current transformer with a 20-meter wire-end cable, ideal for use with MultiPlus-II and MultiGrid-II systems. It enables accurate external current sensing to support PowerControl and PowerAssist features and helps optimize energy self-consumption in solar hybrid and off-grid installations. |
€ 79,66
-
+
|
|
1-2 weeks delivery time The Victron Energy ASS000020000 is a replacement Type C temperature sensor designed specifically for use with the Inverter RS Smart Solar. It ensures accurate battery temperature monitoring and charge compensation. The cable length can be modified if needed, but excessive resistance should be avoided to maintain accuracy. |
€ 24,68
-
+
|
|
1-2 weeks delivery time The Victron Energy ASS000100000 is an optional temperature sensor designed for the BMV-702 and BMV-712 battery monitors, as well as the SmartShunt and VE.Bus Smart Dongle. It enables accurate monitoring of the main battery temperature, supports charge optimization, and allows configurable high/low temperature alarms. Compatible with VRM and VE.Smart Networking. |
€ 37,03
-
+
|
|
1-2 weeks delivery time The Victron Energy ADA500100100 DIN35 Adapter Small (supplied per pair) allows for easy and secure DIN-rail mounting of compatible Victron devices such as the Cerbo GX. This robust and compact adapter ensures reliable integration into control cabinets and enclosures, supporting structured installations in marine, automotive, and off-grid power systems. |
€ 16,83
-
+
|
How do Victron inverters contribute to the energy management of marine and RV systems?
Victron inverters are integral components in the energy management of marine and RV systems. These inverters, such as the Victron Phoenix inverter and Victron MultiPlus, are designed to efficiently convert DC power from batteries into AC power, ensuring a stable and reliable energy source for various onboard appliances and systems. They work in tandem with Victron MPPT charge controllers, battery monitors, and battery balancers to optimize power generation, storage, and distribution, making them essential for maintaining electrical autonomy and reliability in such environments.
Victron Energy, a trusted brand since 1975, extends its expertise beyond marine and RV systems to cater to residential and industrial energy solutions. Renowned for their technical innovation and quality, Victron products like the SmartSolar MPPT and the Victron BMV-712 SmartShunt integrate seamlessly with Lifepo4 batteries and solar energy systems, offering reliable power conversion across a wide range of applications. Each device, from their advanced inverters to the Lynx distribution system, comes equipped with Bluetooth capabilities, USB interfaces, and robust NEMA-rated enclosures, ensuring that they withstand the demanding conditions they are subjected to. Victron continues to play a vital role in global energy management with its extensive and diverse product offerings.
To explore high-performance inverter options tailored for marine environments, browse our complete selection of Boat Inverter models.
How does a Victron MPPT controller optimize solar power generation for off-grid systems?
The Victron MPPT (Maximum Power Point Tracking) controller is an essential component in optimizing solar power generation for off-grid systems. It efficiently manages the charging process by continuously tracking the maximum power point of the solar panels, ensuring that the energy is harvested at its highest potential. This technology maximizes the efficiency of energy conversion, enabling the system to harness more solar power and store it in a Victron Lithium Battery for later use, ultimately enhancing the energy autonomy and sustainability of marine and RV systems.
Victron Energy’s extensive range of products — including advanced solutions like Bluetooth-enabled monitoring, 120V support, and MK3-USB interfaces — is designed for flexible integration and smart control. These tools work seamlessly with larger system components such as the Victron Quattro, enabling powerful hybrid energy setups that adapt to diverse conditions.
What is the purpose of a Victron battery monitor and how does it work?
A Victron battery monitor serves the critical role of providing real-time data and insights into the condition and performance of batteries in marine and RV systems. It monitors parameters like voltage, current, state of charge, and more to ensure optimal battery health. By displaying this information, users can make informed decisions to prevent overcharging, undercharging, or other issues, ultimately prolonging the life of their batteries and enhancing the reliability of their energy systems.
Victron Energy, renowned for its leadership in developing battery-based power solutions, offers a broad array of battery monitors that are essential for maintaining the longevity and efficiency of battery systems in RVs and marine environments. These monitors are often used alongside systems powered by a Marine Inverter to ensure seamless energy management. With features like Bluetooth built-in and the versatile interface MK3-USB, Victron's battery monitors cater to a wide range of needs, adhering to NEMA standards for quality and durability. Proudly based in the Netherlands, Victron continues to be a common choice among those seeking dependable energy management products.
To explore more smart monitoring solutions, visit our Victron Energy Blue Power section.