Rule is a trusted global leader in submersible bilge pumps and accessories for both recreational and small commercial boats. Their range of high-quality products includes submersible bilge pumps, ventilation blowers, rule mate automatic bilge pumps, switches, and alternative energy with rechargeable bilge pumps.
Rule Pumps: The Industry Standard for Quality and Reliability
With a reputation for quality, assurance, and exceptional customer care built over 35 years, Rule has become the industry standard for both manual and automatic submersible bilge pumps. These automatic computerized sump pumps are used for draining pools, pool covers, basements, garages, utility rooms, sumps, boats, and other utility applications.As part of Xylem, Rule remains the top choice for boaters and manufacturers worldwide—often paired with reliable Bilge Pump Float Switches for complete bilge management.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Rule 59 straight thru-hull fitting is a high-impact plastic marine plumbing component designed for use with Rule pumps. It is corrosion-resistant and will not rust, corrode, or discolor, and it includes a 38 mm hose connection with a 1 1/2-inch skin passage diameter for installation. |
$ 22.80
-
+
|
|
1-2 weeks delivery time The Rule 59407-1000 air belt kit is a replacement component for bilge pump switches, intended to support efficient airflow and reliable pump operation in marine environments. Order Number: 00304543. |
$ 23.05
-
+
|
|
1-2 weeks delivery time The Rule 60 thru-hull fitting is a high-impact plastic marine fitting with a 29 mm (1-1/8 inch) hose connection diameter. It is designed to work with Rule pumps and is built to resist rust and corrosion. Order number 00304490, supplier code 60, barcode 042237083852. |
$ 19.42
-
+
|
|
1-2 weeks delivery time The Rule 601C is an angled thru-hull component for a Livewell 500 setup. |
$ 104.50
-
+
|
|
1-2 weeks delivery time The Rule 601FC straight seacock is a Livewell 500 component intended for use as a straight-through seacock connection in a livewell setup. |
$ 97.02
-
+
|
|
1-2 weeks delivery time The Rule 601STC straight thruhull component is specified for the Livewell 500 configuration and is supplied as a straight-style thruhull part. |
$ 104.50
-
+
|
|
1-2 weeks delivery time The Rule 603C is an angled thru-hull component listed for the Livewell 800. |
$ 127.39
-
+
|
|
1-2 weeks delivery time The Rule 603FC is a straight seacock intended for Livewell 800 applications. |
$ 100.74
-
+
|
|
1-2 weeks delivery time The Rule 603STC straight thru-hull component is specified for the Livewell 800 setup. |
$ 100.74
-
+
|
|
1-2 weeks delivery time The Rule 605C is an angled thru-hull fitting listed for Livewell 1100 use. |
$ 135.42
-
+
|
|
1-2 weeks delivery time The Rule 605FC is a straight seacock specified for Livewell 1100 applications. |
$ 104.50
-
+
|
|
1-2 weeks delivery time The Rule 605STC is a Livewell 1100 straight thru-hull component specified as a straight-through thru-hull unit. |
$ 135.42
-
+
|
|
1-2 weeks delivery time The THRUHULL FITTING 3/4 90 is a 3/4-inch thru-hull fitting with a 90-degree configuration. |
$ 25.08
-
+
|
|
1-2 weeks delivery time The Rule 61S thru-hull fitting is a high-impact plastic pass-through connector with a 19 mm (3/4 inch) hose connection for use with Rule pumps. Order number 00304491; supplier code 61S; barcode 042237083876. |
$ 17.63
-
+
|
|
1-2 weeks delivery time The thru-hull fitting is a 5/8-inch 90-degree thru-hull connection component for routing a line through a hull or panel with an angled outlet. |
$ 25.59
-
+
|
|
1-2 weeks delivery time The Rule vertical mounting bracket is a wall-installation bracket intended for older bilge pump models 360, 500, 800 (round), and 1100. Product identifiers include order number 00304492, supplier code 66, and barcode 042237083920. |
$ 12.71
-
+
|
|
1-2 weeks delivery time The Rule 66A vertical mounting bracket is a compact mounting accessory for newer oval-style Rule bilge pumps from 360 to 1100 GPH (post-2017 models). It is made from high-impact, UV-resistant plastic with a UV-protected black finish, and is intended for vertical installation. Dimensions are 83 mm (W) x 50 mm (H) x 40 mm (D) with an approximate weight of 0.04 kg (approx. 0.24 kg packed), and it is suitable for temperatures from -20°C to +60°C. |
$ 30.36
-
+
|
|
1-2 weeks delivery time The Rule 70 stainless steel debris strainer is a corrosion-resistant intake strainer designed to help protect compatible Rule pumps by filtering debris before it enters the pump. It features a fine 0.5 mm mesh, 1-1/8 inch (29 mm) thread, 50 mm strainer diameter, and screw-on mounting, with a stated temperature range of -10°C to 80°C; item weight is 27.2 g (29 g packed). |
$ 5.80
-
+
|
For more bilge pump switch options, explore our Rule Bilge Pump Switch.
For enhanced bilge pump automation, explore our Rule Float Switch, designed for reliable water level control and pump activation. These solutions are especially effective when paired with Bilge Pumps for Small Boats, ensuring efficient operation in compact marine systems.
For marine use, the Rule Automatic Bilge Pump offers reliable, hands-free operation to keep bilges dry and vessels safe. Trusted by professionals and boat owners worldwide, Rule pumps are known for their durability, efficiency, and smart activation features.