Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
$ 121.16
-
+
| |
|
1-2 weeks delivery time The Nanni Diesel 970307790 starter sealing gasket supports a clean, protected interface within the starter details assembly on Nanni marine diesel engines. Designed for reliable service in the starter area, it helps maintain proper sealing and reduces the risk of contamination around the starter installation on 5.250TDI and 5.280HE engines. |
Our managers will contact you and clarify the terms of the order
|
|
$ 703.67
-
+
| |
|
1-2 weeks delivery time The Nanni Diesel 970151125 governor adjustment assembly supports accurate speed control by setting and stabilizing the governor action within the camshaft assembly. Designed as an OEM-fit component for Nanni marine diesel engines, it helps maintain smooth engine response and consistent operating speed on 2.60HE, 3.90HE, and 4.110HE engines. |
$ 133.88
-
+
|
|
$ 3,722.05
-
+
| |
|
$ 1,453.43
-
+
| |
|
1-2 weeks delivery time The Nanni Diesel 32399010 sea water tube is a cooling-water line used within the N4.100 air cooler assembly, helping route raw seawater through the charge-air cooling circuit. Designed for Nanni Diesel N4.85 and N4.111 engines, it supports stable intake-air cooling performance and dependable operation in marine conditions. |
$ 62.02
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 32805120 hose is a dedicated line element used within the injection lines nozzles assembly to support clean, controlled fuel delivery at the injector/nozzle side of the system. Built for OEM-fit replacement on Nanni T4.270 and T4.230 engines, it helps maintain secure routing and dependable operation of the engine’s fuel injection circuit. |
$ 6.52
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 32806170 hose is a fuel-system line element used within the injection lines and nozzles assembly on T4.270 and T4.230 engines. Designed to suit OEM routing and connections, it supports clean, reliable fuel delivery to the injection hardware for stable engine operation underway. |
$ 7.55
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 32840001 pipe is a hard-line connection used within the heat exchanger exhaust manifold assembly to route fluid flow reliably under marine operating conditions. Designed for OEM fit on T4.155 and 4.380TDI engines, it also matches 4.380TDI stern drive configurations where the same heat exchanger exhaust manifold arrangement is used. |
$ 278.97
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 38261401 wood screw is a marine-grade fastening element used within the sail drive basement assembly to secure fitted components and keep the installation tight under vibration. It is a direct-fit replacement for 2.50 HE Sail Drive and 3.75 HE Sail Drive engines, supporting clean service work and dependable retention of sail drive hardware. |
$ 0.97
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 39020301 stud bolt is a marine-grade fastening element used across multiple engine assemblies to secure critical housings and mounted components with consistent clamping force. Installed in locations such as the gear box flange, flywheel housing, intercooler, heat exchanger groups, speed control, throttle control, ECU and circuit breaker assembly, and filter support, it supports reliable mechanical retention on applications including 4.390TDI Stern Drive, T4.155, 4.380TDI, T4.165, T4.180, T4.200 Rive, T4.212, T4.270, T4.230, T4.205 Standard, T6.420TDI, and T6.300 engines, with specific fitment noted up to Serial No. T203061009 for listed assemblies. |
$ 6.60
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 39020308 stud-type fastener secures critical joints within the exhaust elbow and intercooler assemblies, helping maintain dependable clamping force under marine engine vibration and thermal cycling. Used on N2.14 and N3.21 Standard engines for exhaust elbow mounting, it is also specified for intercooler fitment on T6.420TDI and T6.300 engines, including Stern Drive versions. |
$ 6.82
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 39020334 stud bolt is a dedicated fastener used in the intercooler assembly to secure mating components under vibration and thermal cycling. Designed for dependable OEM fit on T6.420TDI and T6.300 marine engines, it also suits the same models in stern drive configurations to help keep the charge-air cooling system firmly clamped and leak-resistant. |
$ 9.66
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 39020336 heat exchanger mounting stud is a threaded fastener used in the heat exchanger assembly to secure components and maintain a rigid, leak-resistant installation under marine engine vibration and thermal cycling. It is specified for Nanni Diesel 4.200TD, 4.220HE, N4.40, N4.50, and N4.60 engines. |
$ 14.54
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 39020339 heat exchanger stud bolt is a threaded fastening element used in the heat exchanger assembly to secure components and maintain a stable, leak-resistant cooling system installation. Designed as a direct-fit replacement, it supports dependable service on 4.200TD, 4.220HE, N4.40, N4.50, and N4.60 engines. |
$ 12.28
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 39020403 stud bolt is a threaded fastening element used across key engine and driveline interfaces, providing secure clamping and stable alignment in the gearbox flange, flywheel housing, and intercooler assemblies. This OEM-fit stud bolt is specified for 4.390TDI Stern Drive engines and multiple T4 series applications including T4.155, T4.165, T4.180, T4.200, and T4.212 engines, as well as 4.380TDI variants, with applicability up to serial number T103060522 where noted. |
$ 5.86
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 39020435 stud bolt is a precision fastening element used in the gearbox flange assembly, helping secure mating components for a stable, aligned drivetrain connection. Designed for Nanni Diesel 4.340TDI engines, it supports dependable clamping force in the transmission interface where vibration resistance and accurate fit are essential. |
$ 8.99
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.