Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
$ 313.95
-
+
| |
|
1-2 weeks delivery time Tachometer for engine speed monitoring. |
$ 1,265.80
-
+
|
|
$ 88.47
-
+
| |
|
1-2 weeks delivery time The Nanni Diesel 970140114 drain plug is a compact sealing fastener used on the engine block and crankcase and cylinder assemblies to close off a drain port for controlled fluid draining during maintenance. Installed in the lower casting areas where draining is required, it helps keep the engine tight and service-friendly on Nanni 3.100HE, 4.150HE, N3.30, and N4.38 marine diesel engines. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970140115 cylinder liner is a precision engine-block wear element designed for 2.40HE engines. Installed in the engine block assembly, it forms the working cylinder bore surface for the piston, supporting stable compression, controlled oil film, and long-lasting internal protection in demanding marine duty. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970140905 complete cylinder head assembly restores proper combustion-chamber sealing and valve-train alignment within the cylinder head system on 2.40HE engines. Supplied as a complete unit for straightforward replacement, it supports reliable compression, efficient gas flow, and stable engine operation under marine duty cycles. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970140913 cylinder head stud is a dedicated fastening element for the cylinder head assembly on 2.40HE engines. It helps clamp the cylinder head to the engine structure with stable, even load, supporting gasket sealing and reliable operation under marine-duty vibration and thermal cycling. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141008 rocker arm shaft is a valve train support component used in the valves and springs assembly to keep rocker arms aligned for smooth, accurate valve actuation. Designed for Nanni Diesel 2.40HE, 2.45HE, and 2.50HE engines, it provides a dependable OEM-fit replacement to maintain stable rocker motion and consistent engine breathing under marine operating loads. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141017 rocker arm spring is a valvetrain spring element used within the valves and springs assembly to support stable rocker arm operation and consistent valve motion. Designed as an OEM replacement part for Nanni HE series engines, it helps maintain correct valvetrain control on 2.40HE, 2.45HE, 2.50HE, and 3.75HE marine diesel engines. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141309 governor lever is a control linkage component used within the accelerator and governor assemblies to transmit throttle input to the engine speed governing mechanism. Designed for a precise OEM-style fit on Nanni 2.40HE, 2.45HE, 2.50HE, and 3.75HE engines, it helps maintain smooth, predictable engine response and stable speed control under changing load conditions. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141317 governor fork lever is a control linkage component used within the accelerator and governor assemblies to transmit throttle movement into precise governor actuation. Designed for OEM fit on Nanni HE series engines, it helps maintain smooth, predictable engine speed control on 2.40HE, 2.45HE, 2.50HE, and 3.75HE installations. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141321 governor support is a mounting component that stabilizes and positions the governor within the governor assembly on N3.21 engines. By keeping the governor securely supported, it helps maintain consistent control linkage alignment and dependable engine speed regulation in marine operating conditions. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141515 complete crankshaft assembly is the core rotating component that converts piston force into smooth, usable shaft power in 2.40HE engines. Supplied as part of the crankshaft and pistons assembly, it supports stable engine operation by delivering consistent rotational drive through the bottom end for reliable marine propulsion. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141538 main bearing case is a crankshaft bearing-housing component used within the crankshaft and bearings assembly on 2.40HE engines. Designed to support the crankshaft bearing location, it helps maintain correct bearing alignment and stable crankshaft operation for dependable marine engine performance. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141546 crankshaft bearing insert (code 1, 0.02) is a precision-fit engine bearing element used within the crankshaft and piston assembly. Designed for N3.21 engines, it supports smooth crankshaft rotation under load while helping maintain stable oil film control for dependable marine-engine performance. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141555 connecting rod bearing insert is a precision engine bearing element used within the crankshaft and pistons assembly to support smooth connecting rod movement on 2.40HE engines. Specified as 0.04 for the 2.40 application, it helps maintain stable oil film control and reliable bottom-end operation under marine duty cycles. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970141706 flywheel washer is a precision-fit fastening element used within the flywheel assembly on 2.40HE engines. Positioned under flywheel hardware to distribute load and support secure clamping, it helps maintain stable flywheel retention and dependable drivetrain alignment in demanding marine operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970142110 fuel line is a dedicated fuel delivery pipe for cylinder 1 on 2.40HE engines, installed within the injection nozzles and pipes assembly. Designed to maintain stable fuel supply to the injector circuit, it supports clean routing and dependable operation of the high-pressure injection system in marine duty. |
Our managers will contact you and clarify the terms of the order
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.