Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 43320334 spacer (22 x 11 mm, height 23 mm) is a precision stand-off element used within the PONAM/SARD heat exchanger assembly to maintain correct spacing and alignment of mounted components. Designed for Nanni Diesel T4.270 and T4.230 engines, it supports secure assembly and helps preserve proper heat exchanger fit-up under marine engine vibration and thermal cycling. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 48100885 Torflex 630 damper is a drivetrain damping element used in the damper assembly to help smooth torsional pulses and protect connected components under changing load. Identified as “Torflex 630 - 6.420 TDI”, it is specified for Nanni Diesel T6.420TDI and T6.300 engines to support quieter operation and more controlled power transmission. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Coupling for SD Technic N3.30 configuration. |
$ 1,313.50
-
+
|
|
1-2 weeks delivery time Sea water pump model F5B-9 for marine cooling. |
$ 1,791.98
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48190033 engine mount isolator is a SIM 200 anti-vibration mount element used in the engine mount assembly to help support the engine and reduce transmitted vibration into the hull. Supplied in the 40SH version and configured without an installed stud, it is specified for N2.10 and N2.14 engines to maintain stable alignment and smoother operation under load. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 48201002 revolution counter is a dedicated engine speed gauge for the instrument panel assembly, helping you monitor RPM clearly and accurately while underway. Built to integrate into Nanni instrument panels, it supports confident throttle and load management on 4.340TDI engines for smoother operation and better engine protection. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 48201106 engine stop solenoid valve is an electrical shutoff component used in the engine electrics system to command reliable engine stopping. Installed within the electrics assembly, it actuates the stop function to support controlled shutdown on T4.155 and 4.380TDI engines (including stern drive versions), as well as T6.420TDI and T6.300 engines. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time 100A MIDI fuse for circuit protection. |
$ 27.48
-
+
|
|
1-2 weeks delivery time Pressure switch for engine monitoring. |
$ 279.66
-
+
|
|
1-2 weeks delivery time 30A DC circuit breaker for electrical system protection. |
$ 68.02
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48300397 exhaust manifold heat exchanger is a combined cooling component built into the exhaust manifold heat exchanger system, helping transfer engine heat into the raw-water circuit to maintain stable operating temperature. Specified within the heat exchanger exhaust manifold assembly and also listed under heat exchanger spare parts, it is a correct-fit replacement for T4.165, T4.180, and T4.200 engines. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 48300465 charge air cooler M1KD-240 is a dedicated intercooler component that helps reduce intake air temperature for stable combustion and efficient power delivery. Installed within the intercooler system, it supports dependable charge-air cooling on T4.270, T4.230, and T4.205 Standard engines, making it a smart OEM replacement when restoring boost-air temperature control. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 48300467 intercooler water inlet cap is a dedicated cover component for the air cooler details assembly, guiding cooling water into the intercooler circuit to support stable charge-air cooling. Designed for Nanni Diesel N4.85 and N4.100 engines, it helps maintain proper water routing at the intercooler inlet for reliable temperature control under marine operating loads. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 48300468 intercooler water outlet cap is a dedicated cooling-system component for the charge air cooler assembly details, guiding cooling-water flow out of the intercooler on N4.85 and N4.100 engines. Built as an OEM replacement part, it supports stable charge-air cooling performance by maintaining a secure outlet connection within the intercooler circuit. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 48300469 heat exchanger water inlet cap is a sealing cover component used in the heat exchanger detail assembly to manage raw-water entry into the exchanger body. Designed for N4.85 and N4.100 engines, it supports proper coolant circuit flow control and helps maintain a secure, leak-resistant connection at the exchanger inlet during marine engine operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 48300470 heat exchanger water outlet cap is a cooling-system cover component used in the heat exchanger details assembly to close and protect the exchanger’s outlet section for controlled coolant flow. Designed for N4.85 and N4.100 engines, it supports a secure, reliable interface at the heat exchanger outlet to help maintain stable engine cooling performance. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 48328276 seawater pump assembly part is an OEM replacement component used within the seawater pump assemblies identified as PONAM and SARD on T4.270 and T4.230 engines. Installed in the raw-water cooling circuit, it supports dependable seawater pump operation to keep engine cooling water flowing correctly under continuous marine load. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Hose for intercooler water inlet. |
$ 101.38
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.