Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni 860020003 impeller kit is a genuine seawater pump maintenance kit designed for Nanni N4.50 marine diesel engines. Intended for routine cooling system servicing, the kit includes a replacement impeller and pump gasket to help maintain efficient seawater circulation and reliable engine cooling performance in demanding marine environments. |
$ 100.87
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970301403 thermostat cover is a cooling-system component that closes and protects the thermostat area within the heat exchanger assembly. Designed for a secure, OEM-style fit, it supports stable engine temperature control by properly housing the thermostat and maintaining correct coolant flow paths on 4.190HE, 4.195HE, 4.200HE, 4.220HE, 5.250TDI, and 5.280HE engines. |
Our managers will contact you and clarify the terms of the order
|
|
$ 76.19
-
+
| |
|
Our managers will contact you and clarify the terms of the order
| |
|
$ 466.62
-
+
| |
|
1-2 weeks delivery time The Nanni Diesel 970851725 engine temperature sender is a sensing element used to monitor engine temperature and feed an accurate signal to the vessel’s gauge and alarm circuits. Installed within the cylinder head and integrated with the electrical equipment and instrument panel circuits, it supports dependable temperature indication on 2.60HE, 3.90HE, 4.110HE, and 4.190HE engines. |
$ 58.92
-
+
|
|
$ 1,093.38
-
+
| |
|
1-2 weeks delivery time The Nanni QCY01338AP syphon breaker is a marine anti-siphon device designed to prevent seawater backflow into the engine cooling and exhaust system. Compatible with hose diameters from Ø13 to Ø38 mm, it ensures safe operation in installations where the injection point is near or below the waterline. |
Our managers will contact you and clarify the terms of the order
|
|
$ 58.91
-
+
| |
|
$ 589.57
-
+
| |
|
$ 16.12
-
+
| |
|
1-2 weeks delivery time The Nanni Diesel 970307712 heat exchanger housing is a core structural component within the heat exchanger assembly, supporting proper coolant flow and secure mounting of heat exchanger internals on Nanni marine diesel engines. Built as a direct replacement housing, it helps maintain stable operating temperatures and dependable closed-loop cooling performance on 4.190HE, 4.195HE, 4.200HE, and 4.220HE engines. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Heat exchanger replacing part 48300466A. |
$ 5,690.30
-
+
|
|
$ 257.90
-
+
| |
|
$ 115.14
-
+
| |
|
1-2 weeks delivery time The Nanni Diesel 970310517 medium rubber engine mounting element (CPL.45) helps isolate vibration and support proper engine alignment in the engine mount assembly on N4.40 and N4.50 marine diesel engines. This version corresponds to the engine mount modification introduced from number 363094, making it a dependable OEM replacement for restoring stable, quiet operation underway. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni Diesel 970310152 heat exchanger tube stack is a core cooling element inside the heat exchanger system, built to support efficient heat transfer for stable engine temperatures. Designed for use on 4.150HE engines, this replacement tube bundle helps maintain dependable closed-loop cooling performance under continuous marine load. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Nanni QRE30245GR Microbloc diesel filter cartridge is a 30-micron replacement element designed for the Nanni QFI00245GR diesel water separator filter. Developed for marine diesel fuel systems, the cartridge removes sediment, water-related contaminants, and coarse particles before fuel reaches injectors and fuel pumps. Its spin-on replacement configuration enables quick servicing and dependable filtration performance in onboard diesel engine installations operating in demanding marine environments. |
Our managers will contact you and clarify the terms of the order
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.