Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
$ 1,524.66
-
+
| |
|
$ 1.53
-
+
| |
|
1-2 weeks delivery time The Nanni Diesel 970313940 injection nozzle seat is a precision seating element used in the injection system to support correct injector-to-cylinder head positioning and sealing. Supplied for use within the gasket set and also referenced under the injection lines and nozzles assembly, it helps maintain stable fuel delivery and combustion performance on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines. |
$ 41.08
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314051 fuel injection or supply pump assembly is a complete pump unit for the injection and fuel pump system, delivering the controlled fuel flow needed for stable starting, smooth running, and dependable power output. Designed as an OEM-fit replacement for T4.165, T4.180, and T4.200 engines, it supports consistent fuel delivery to the engine’s injection circuit under marine operating conditions. |
$ 21,099.34
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314054 sealing gasket for the fuel filter warning switch helps maintain a tight, leak-resistant interface at the warning switch connection on the fuel filter assembly. Designed for dependable service in marine fuel systems, it supports clean, secure sealing on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines. |
$ 55.72
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314056 hollow injector screw is a dedicated fastener for the fuel injection lines and nozzle assembly on Nanni T4 series marine diesel engines. Designed to secure and support proper fuel delivery at the injector connection point, it helps maintain a stable, leak-resistant joint on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines. |
$ 57.61
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314059 nozzle holder clamp is a securing fastener used within the injection lines and nozzles assembly to удерж firm positioning of the injector nozzle holder under engine vibration. Designed for OEM-correct fit on T4.165, T4.180, and T4.200 engines, it supports stable fuel delivery by keeping injection components properly aligned. |
$ 149.69
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314060 No. 1 fuel injection pipe assembly supports accurate fuel delivery from the injection and fuel pump system to the engine’s injection circuit. Built as a direct-fit replacement within the Injection & fuel pump assembly, it helps maintain clean routing and consistent injection performance on T4.165, T4.180, and T4.200 engines. |
$ 804.65
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314061 injection pipe sub-assembly No. 2 is a dedicated fuel line element within the injection and fuel pump assembly, designed to route high-pressure fuel with secure, leak-tight connections. Built for OEM-correct fit on Nanni T4.165, T4.180, and T4.200 engines, it supports clean, consistent injection delivery for dependable starting, smooth running, and efficient combustion underway. |
$ 804.65
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314062 No. 3 injection pipe sub-assembly ensures clean, accurate high-pressure fuel delivery within the injection and fuel pump system on T4.165, T4.180, and T4.200 marine diesel engines. Built for correct routing and secure connections, it supports stable injection performance and dependable engine operation under marine load. |
$ 804.65
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314063 No. 4 fuel injection pipe assembly routes high-pressure fuel within the injection and fuel pump system to support precise cylinder fueling on T4.165, T4.180, and T4.200 marine diesel engines. Built for OEM fit, it helps maintain accurate injection timing and stable engine performance under load. |
$ 804.65
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314064 injection pipe clamp is a dedicated retaining fastener used within the injection and fuel pump assembly to keep injection lines securely supported and correctly routed. By stabilizing the pipework against vibration, it helps maintain reliable fuel delivery on Nanni Diesel T4.165, T4.180, and T4.200 engines. |
$ 24.08
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314065 injection pipe clamp No. 3 is a dedicated line-retaining fastener used within the injection and fuel pump assembly to keep the injection pipe securely supported and correctly routed. By stabilizing the pipework, it helps reduce vibration-related fatigue and maintains clean, reliable fuel delivery on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard marine diesel engines. |
$ 63.75
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314066 nozzle leakage pipe assembly No. 1 is a dedicated return-line component within the injection lines and nozzles system, routing injector leak-off fuel back through the engine’s return circuit for clean, stable fuel system operation. Built for an OEM-style fit on Nanni T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines, it supports tidy installation and dependable injector drainage under marine duty cycles. |
$ 580.82
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314067 injector leak-off pipe assembly (No. 2) routes fuel return from the injector leakage circuit to keep the injection system operating cleanly and consistently. Installed within the injection lines and nozzles assembly, it supports proper fuel management on Nanni Diesel T4.165, T4.180, and T4.200 marine engines. |
$ 1,008.64
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314068 fuel inlet pipe sub-assembly routes fuel cleanly into the injection and fuel pump system to support stable supply and dependable engine operation. Used within the injection and fuel pump assembly on T4.165, T4.180, and T4.200 engines, it provides an OEM-correct replacement for maintaining proper fuel feed to the high-pressure side of the fuel system. |
$ 382.49
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314088 fuel temperature sensing element supports accurate fuel temperature monitoring on T4.165, T4.180, and T4.200 engines. Used within the electrics system and the injection and fuel pump assembly, it helps the engine management and fuel delivery system maintain stable running and dependable performance under changing operating conditions. |
$ 514.71
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314090 flange bolt is a dedicated fastener for securing components within the injection lines and nozzles assembly on T4 series marine diesel engines. Designed for a stable, vibration-resistant hold in the fuel injection area, it supports consistent injector line positioning and dependable service on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines. |
$ 22.66
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.