Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 970500502 cylinder head cover sealing gasket is designed to restore a tight, oil-resistant seal at the cylinder head cover as part of the cylinder head cover assembly, and it is also supplied within the maintenance kit. Built for 3.90HE engines, it helps prevent oil seepage around the valve cover area and supports clean, stable engine operation in marine service. |
$ 64.65
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970500503 decompression shaft supports smooth manual decompression actuation within the cylinder head cover assembly on 3.90HE engines. Designed as an OEM replacement component, it helps ensure controlled valve operation during starting and service procedures, maintaining correct function and dependable fit in the cylinder head cover system. |
$ 1,603.23
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970501101 complete camshaft assembly is a precision timing component built for the camshaft system on 3.90HE engines. It drives accurate valve actuation through the engine’s valvetrain, helping maintain smooth power delivery and dependable running in demanding marine duty. |
$ 4,047.63
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970501140 camshaft is a precision valve-train drive component for the camshaft assembly on 3.90HE engines. It controls valve timing by actuating the engine’s valve gear in sync with crankshaft rotation, helping maintain smooth combustion, efficient breathing, and dependable marine-engine performance. |
$ 2,296.70
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970501541 main bearing assembly No. 3 supports stable crankshaft rotation within the crankshaft bearings assembly, helping maintain smooth operation and consistent alignment under marine engine loads. Built as an OEM replacement component, it is matched for Nanni 3.90HE and 4.110HE engines to restore proper bearing support during service or overhaul work. |
$ 745.98
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970502111 injection pump shim is a precision spacing element used within the injection and feed pump assembly on 3.90HE engines. Installed to support correct pump positioning and alignment, it helps maintain stable fuel system operation and consistent engine performance in marine duty. |
$ 19.93
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970502120 fuel injection pump is a complete pump unit for the injection and feed pump assembly on 3.90HE engines. It supports precise delivery of fuel to the injection system, helping maintain stable engine response, efficient combustion, and dependable starting and running under marine operating loads. |
$ 6,381.62
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970504001 sea water pump assembly provides the raw-water flow needed to support engine cooling on 2.60HE and 3.90HE marine diesel engines. Supplied as the FB4-9 pump used in the sea water pump system (including the detailed pump sub-assembly), it delivers dependable water circulation to help protect the cooling circuit and maintain stable operating temperatures underway. |
$ 530.91
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970504028 F4B-9 sealing gasket is a sea water pump service gasket used within the sea water pump details assembly and also supplied through selected spare parts and maintenance kits. It helps keep the raw-water cooling circuit tight and reliable during pump servicing on 2.40HE, 2.45HE, 2.50HE, 2.60HE, 3.75HE, 3.90HE, N2.14, N3.21, and N3.21 Standard engines. |
$ 5.27
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970504034 sea water pump cam F4B-9 is a pump internal wear element used in the sea water pump details assembly to support consistent impeller deformation and water flow. Designed as an OEM replacement part, it helps maintain dependable raw-water cooling performance on 2.40HE, 2.45HE, 2.50HE, 2.60HE, 3.75HE, 3.90HE, N2.14, N3.21, and N3.21 Standard engines. |
$ 54.08
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970510110 oil pan gasket is a sealing element for the oil sump and oil pump assembly on 4.110HE engines. Designed to sit between the oil pan and the engine mating surface, it helps maintain a tight oil seal to reduce the risk of leaks and support clean, reliable lubrication in demanding marine operation. |
$ 154.63
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970510905 complete cylinder head assembly for 4.110HE engines restores the core top-end structure within the cylinder head system, providing the foundation for proper combustion chamber sealing and valve train alignment. Built as an OEM replacement component, it is suited to marine duty where stable compression and dependable engine operation are essential. |
$ 10,139.13
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970511008 rocker arm shaft is a precision valvetrain support component for the valves and springs assembly on 4.110HE engines. It provides a stable mounting axis for the rocker arms, helping maintain accurate valve actuation and consistent top-end operation under marine running conditions. |
$ 153.57
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970511101 complete camshaft assembly provides precise valve-train timing as a core component within the camshaft system on 4.110HE marine diesel engines. Designed as a direct-fit replacement, it helps maintain correct valve actuation and stable engine operation under continuous marine loads. |
$ 4,047.63
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970511515 complete crankshaft assembly is the core rotating component within the crankshaft-pistons system, converting piston movement into smooth, usable output torque. Designed for Nanni Diesel 4.110HE engines, it supports stable engine balance and reliable power transmission throughout the operating range. |
$ 14,567.13
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970511542 main bearing assembly supports the crankshaft bearing set in the crankshaft-bearings group, helping the crankshaft run smoothly and stay correctly aligned under load. Specified as the N04 4.110 main bearing assembly, it is suited to Nanni Diesel 4.110HE engines where stable crankshaft support is critical to dependable marine operation. |
$ 718.68
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970512117 glow plug cable is a dedicated electrical lead that supports dependable preheating on 4.110HE engines. Installed within the injection nozzles and pipes assembly area, it connects the glow plug circuit to deliver consistent current during cold starts, helping the engine light off quickly and smoothly in marine operating conditions. |
$ 33.66
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970515101 intake manifold is a dedicated air-distribution component for the intake manifold assembly on 4.110HE engines. Designed to route intake air evenly to the cylinders, it supports stable combustion, responsive throttle behavior, and dependable marine engine operation with an OEM-correct fit. |
$ 929.96
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.