Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 970313196 oil drain pipe is a rigid transfer line used within the oil drain pump system and the oil sump and oil pump assembly on N2.14 marine engines. It supports clean, controlled oil evacuation and return routing during servicing or operation, helping maintain orderly lubrication-system flow with an OEM-correct fit. |
$ 201.74
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313218 starter motor assembly provides the cranking power needed for dependable engine starts on Nanni N3.21, N3.30, and N4.38 marine diesel engines. Used within the electrics and starter motor grouping and referenced around the flywheel, flywheel housing, and reverse gear flange, this complete starter unit is built for correct OEM fitment and consistent engagement with the engine’s ring gear in both standard and sail drive installations. |
$ 1,300.51
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313221 cylinder head cover sealing gasket is a precision-fit element for the cylinder head cover assembly on N2.14 engines. It helps maintain a tight seal at the cover-to-head joint, supporting clean, controlled lubrication and reducing the risk of oil seepage in marine operating conditions. |
$ 93.62
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313262 sealing gasket supports clean, leak-free assembly at the nozzle holder and glow plug interface on N4.115 engines. Installed within the nozzle holder and glow plug assembly, it helps maintain proper sealing where these components meet, protecting combustion and preventing unwanted gas or fluid seepage in demanding marine engine operation. |
$ 7.17
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313263 O-ring seal supports leak-free operation within the nozzle holder and glow plug assembly on N4.115 engines. Designed as an OEM-fit sealing element, it helps maintain proper sealing at the injector and glow plug area to protect fuel-system integrity and keep the engine running cleanly and reliably. |
$ 7.12
-
+
|
|
1-2 weeks delivery time Expansion component for Nanni Diesel N3.30 engines. Used within engine system assemblies. |
$ 10.28
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313275 water inlet cover is a heat-exchanger component that closes and protects the water inlet area, helping direct raw-water flow into the cooling circuit for stable engine temperature control. Used in the heat exchanger assembly (including the heat exchanger details section, and heat exchanger page 24 listings), it fits N2.14, N3.21, N3.21 Standard, N3.30, and N4.38 engines for clean, OEM-correct service replacement. |
$ 66.85
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313276 water inlet cover is a heat-exchanger housing component that closes and protects the inlet side of the cooling circuit to help maintain controlled coolant and sea-water flow through the exchanger. Used within the heat exchanger details assembly, it supports a secure, serviceable connection point on N2.14, N3.21, N3.21 Standard, N3.30, and N4.38 engines. |
$ 80.92
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313306 engine oil filter element helps maintain clean lubrication flow for dependable marine diesel operation. Used within the oil filter assembly and the oil and cooler filter assembly, it captures contaminants that can accelerate wear, supporting smooth oil circulation on T4.165, T4.180, T4.200, T4.270, T4.230, and T4.205 Standard engines. |
$ 32.76
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313309 flywheel fastener bolt is designed to secure key driveline mating points within the flywheel housing and gearbox flange assemblies. Built for OEM-style fitment, it helps keep alignment stable between the engine and transmission interface on N2.10, N2.14, N3.21, N3.21 Sail Drive, and N3.21 Standard engines. |
$ 26.73
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313311 fastening bolt is a versatile OEM replacement used across key engine assemblies including the cylinder head, oil sump and oil pump group, oil pan, camshaft injection pump area, and camshaft fuel system. Designed to restore secure clamping and reliable alignment of joined components, it supports dependable service on a wide range of Nanni diesel models such as 2.40HE, 2.45HE, 2.50HE, 3.100HE, 3.75HE, 4.150HE, 4.200HE, 4.200TD, 4.220HE, 5.250TDI, 5.280HE, and the N-series engines including N2.14 through N4.65. |
$ 2.78
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313313 complete flywheel unit is a flywheel assembly used within the flywheel housing and the transmission flange area on N3.21 marine diesel installations. It provides the rotating mass needed for smooth engine operation and stable power delivery, and it is listed for N3.21 and N3.21 Standard engines, with a machining release reference to 95312364B. |
$ 4,190.70
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313314 flywheel is a drivetrain rotating mass used within the flywheel housing and, on selected builds, at the gearbox flange to smooth engine pulses and deliver stable torque into the transmission line. This OEM replacement flywheel fits N2.10, N2.14, and N3.21 Sail Drive engines and is referenced as released under 95312364A for machining. |
$ 2,008.27
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313316 clamp is a securing fastener used in the turbo and exhaust mixer assembly to keep exhaust-side connections tightly joined under vibration and heat. Designed for marine-duty service, it supports a stable, leak-resistant joint on 4.200TD, N4.60, and N4.65 engines, helping maintain correct exhaust gas routing into the exhaust mixer. |
$ 49.87
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313324 union is a precision connection fitting used within the nozzle holder and glow plug assembly on N4.115 engines. It supports secure routing and sealing of the associated lines and components, helping maintain dependable starting and fuel-injection related serviceability with an OEM-correct fit. |
$ 40.26
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313325 fuse is a protective electrical element used in the Electrics assembly to help safeguard onboard engine circuits from overcurrent conditions. Designed for dependable OEM fit on Nanni Diesel T4.165, T4.180, and T4.200 engines, it supports reliable starting, charging, and instrumentation operation by maintaining proper circuit protection in the engine electrical system. |
$ 1.47
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313340 fresh water pump fastener bolt is designed to secure the fresh water pump assembly on Nanni marine diesel engines. Used within the fresh water pump system, it helps keep the pump correctly mounted and stable under vibration and thermal cycling on N3.30 and N4.38 engines. |
$ 7.69
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970313344 hex socket head fastener is a precision bolt used in the governor setting assembly on N3.30 engines and in the electric stop assembly on N4.85 and N4.100 engines. Designed for secure, vibration-resistant clamping, it helps keep critical control components firmly positioned for dependable engine operation. |
$ 2.49
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.