Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 970312877 alternator belt tensioning component is built for the 120A alternator within the standard alternator assembly, helping maintain stable belt tension and consistent alternator drive under changing engine loads. Designed for Nanni Diesel T6 series installations, it supports dependable charging performance on T6.420TDI and T6.300 engines. |
$ 131.27
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312879 cylinder head cover is a protective top-end component built for the cylinder head cover assembly, helping enclose the valve train area and support clean, controlled operation in the upper engine. Designed as an OEM replacement part, it fits Nanni 4.220HE, N4.40, and N4.50 marine diesel engines for dependable service and straightforward installation during routine maintenance or repairs. |
$ 1,460.45
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312935 engine oil cooler assembly helps regulate lubricating-oil temperature as a core element of the oil cooler system on T6.420TDI and T6.300 engines. By stabilizing oil temperatures under load, it supports consistent lubrication performance and helps protect critical engine components during sustained marine operation. |
$ 4,285.79
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312936 oil cooler gasket is a sealing element for the oil cooler assembly on T6.420TDI and T6.300 engines. Designed to maintain a tight joint at the cooler interface, it helps prevent oil leaks and supports stable lubrication temperature control for dependable marine operation. |
$ 37.78
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312937 fresh water pump assembly is a complete cooling-system unit built for the fresh water pump assembly on T6.420TDI and T6.300 marine diesel engines. It circulates coolant through the engine’s closed-loop cooling circuit, helping maintain stable operating temperature and dependable heat transfer under varying load conditions. |
$ 1,464.32
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312938 fresh water pump sealing gasket is designed to restore a tight, leak-resistant joint within the fresh water pump assembly. Used on T6.420TDI and T6.300 engines, it supports stable coolant circulation by helping maintain proper sealing between pump mating surfaces during service or pump refit. |
$ 123.72
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312939 flange bolt is a marine-grade fastening element used in the fresh water pump assembly to secure pump components under vibration and continuous thermal cycling. Designed for a correct OEM fit on Nanni T6.420TDI and T6.300 engines, it helps maintain stable pump mounting and dependable engine cooling system operation. |
$ 17.47
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312940 stud bolt is a dedicated fastening element for the fresh water pump assembly on T6.420TDI and T6.300 engines. It provides secure clamping of pump components to help maintain alignment and sealing under vibration and temperature cycling, making it a dependable choice for service and rebuild work on Nanni marine cooling systems. |
$ 24.08
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312941 fan-drive pulley is a belt-driven rotating element fitted to the fresh water pump assembly, helping transmit engine power to maintain steady coolant circulation. Designed for dependable OEM fit on Nanni T6 series applications, it supports consistent cooling performance on T6.420TDI and T6.300 engines. |
$ 741.85
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312947 intake manifold routes and distributes intake air evenly to the cylinders to support clean, stable combustion on Nanni marine diesel engines. Supplied as part of the intake manifold assembly, it is a direct-fit replacement for N4.40 and N4.50 engines, helping maintain proper airflow management and overall engine responsiveness. |
$ 593.96
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312950 plug is a sealing element used in the timing gear case assembly to close off a dedicated opening and help keep the gear-train area protected. Designed for N4.65 engines, it supports clean, reliable operation by maintaining the integrity of the timing gear case in a marine environment. |
$ 13
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312951 timing case O-ring is a precision sealing element for the timing gear case area, helping keep oil contained and protecting the timing gears from contamination in demanding marine engine service. Designed as an OEM-fit replacement, it is used on Nanni Diesel 4.200TD, N4.40, N4.50, and N4.60 engines to maintain a secure seal during routine servicing or rebuild work. |
$ 7.79
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312952 O-ring sealing element helps maintain a leak-tight joint within the timing gear case area on Nanni marine diesel engines. Used in the timing case assembly, it supports clean oil control and dependable timing-gear housing sealing on 4.200TD, N4.40, N4.50, and N4.60 engines. |
$ 4.88
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312953 timing gear case gasket is a sealing element for the timing gear case assembly, helping keep the gear case interface tight and protected against oil leakage. Designed as an OEM-style replacement, it supports clean, reliable operation on Nanni Diesel 4.200TD and N4 series engines including N4.40, N4.50, and N4.60. |
$ 114.03
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312954 timing gear case bolt is a dedicated fastening element used in the timing gear case assembly to keep the cover and mating components securely clamped under engine vibration and load. It is specified for Nanni Diesel 4.200TD and N4.60 marine engines, supporting a clean, stable installation and dependable timing case retention during service and operation. |
$ 6.74
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312955 timing gear case bolt is a dedicated fastener used within the timing gear case assembly to secure mating components and maintain correct alignment of the gear case on Nanni marine diesel engines. Designed for reliable service in engine front-end hardware, it fits 4.200TD and N4.60 engines for straightforward OEM replacement during timing cover or gear case work. |
$ 8.65
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312956 hour meter gasket is a sealing element for the timing gear case area, helping protect the timing case from oil mist and contamination around the hour meter mounting point. Designed for reliable OEM fit on Nanni marine diesel engines, it suits 4.200TD, N4.40, N4.50, N4.60, and N4.65 engine applications. |
$ 14.19
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970312958 flange bolt is a securing fastener used in the oil sump and oil pump assembly, also referenced within the oil pan assembly listings. Designed for a dependable OEM-style fit, it helps keep critical oil-system components firmly clamped under engine vibration on 4.200TD, N4.40, N4.50, N4.60, and N4.65 engines. |
$ 7.51
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.