Yacht-supply24.com supplies a wide range of Jabsco products, including water pump systems, engine cooling pumps, searchlights, blowers, marine wc waste systems, toilets, impellers, and more. Whether you need reliable and efficient pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction, or top-quality marine equipment, Jabsco has got you covered.
Jabsco, a brand under Xylem, is a renowned manufacturer of products for the leisure marine market, with a rich history of over 80 years in servicing general industrial, marine, and sanitary markets. Shop our selection of Jabsco products and enjoy prompt delivery and competitive prices.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco VR050-1022 self-priming diesel transfer pump delivers heavy-duty, continuously rated refuelling performance on 12V DC power, with output listed up to 50 litres/minute (also stated up to 52 litres/minute at 3 m head). Its robust cast iron body with bronze sliding vanes and an IP55 motor enclosure support reliable operation in demanding environments, while self-priming from dry up to 3 m vertical lift and a maximum recommended total head of 10 m help maintain consistent flow through the system. |
$ 685.59
-
+
|
|
1-2 weeks delivery time The Jabsco VR050-1122 self-priming diesel transfer pump and motor unit delivers reliable fuel transfer for industrial, marine, and agricultural use, combining a cast iron construction with bronze sliding vanes and a 24V DC drive for continuous-duty operation. It provides up to 52 liters per minute flow and dry self-priming up to 3 meters to simplify setup on mobile or stationary systems, while the IP55-rated motor enclosure and wide -30°C to +40°C operating range support demanding environments. Supplied with a switch, fuseholder, and 1-inch hose adapters, it integrates easily with 1-inch hose connections and offers a listed maximum head of 10 meters. |
$ 685.59
-
+
|
|
1-2 weeks delivery time The Jabsco VR050-2022 diesel refuelling pump delivers durable 12 Vdc fuel transfer performance with a cast iron body, sintered bronze vanes, a steel shaft, and a nitrile lip seal. It supports continuous operation with self-priming up to 3 meters and high head capability up to 10 meters, backed by an IP55-protected, corrosion-resistant permanent magnet motor and operation across -22 to +104 °F. The design is vibration tested and includes ISO8846 marine ignition protection, plus access to installation accessories and customized OEM kits. |
$ 617.75
-
+
|
|
1-2 weeks delivery time The Jabsco VR050-2122 diesel transfer pump is a self-priming fuel transfer unit built for efficient, reliable diesel handling. Powered by 24V DC, it delivers a smooth and consistent transfer process with a flow rate up to 50 litres per minute, making it well-suited for applications that require dependable diesel fuel movement. |
$ 617.75
-
+
|
|
1-2 weeks delivery time The Jabsco VR100-1122 self-priming diesel transfer pump delivers high-flow 24V DC fuel transfer for demanding continuous-duty use, with output stated up to 105 litres per minute and robust sliding-vane construction in a cast iron body. Its self-priming capability (from dry up to 5 m vertical lift), IP55 motor enclosure, and operating range of -30°C to +50°C support reliable performance in harsh environments. With 1" BSP threaded ports, compatibility with minimum 32 mm bore hoses via 1-1/4" adapters, and included switch/fuseholder and circuit breaker, it is well equipped for professional refuelling and transfer tasks. |
$ 1,373.85
-
+
|
|
1-2 weeks delivery time The Jabsco VR100-2120 self-priming diesel transfer pump delivers high-flow refuelling performance on 24V DC, with output stated up to 100 litres/minute (and also listed as 105 litres/minute at a 3-meter head). Its cast iron body and bronze sliding vanes support demanding outdoor use, backed by an IP55 motor enclosure and an operating temperature range of -30°C to +50°C. The pump is specified for a 32 mm bore hose and 1" BSP internal threaded ports, with self-priming stated up to 4 m head (also described as 5 m vertical lift from dry start) and a maximum head of 15 m. |
$ 949.07
-
+
|
|
1-2 weeks delivery time The Jabsco X3001-147F fastening screw (M5 x 10mm) is a high-quality spare part built to provide secure, reliable fastening in various applications. Its precise dimensions and durable construction support dependable installation, and the listed shipping weight is 0.10 kg. |
$ 15.02
-
+
|
|
1-2 weeks delivery time The Jabsco X3001-176FB stainless-steel hexagon head fastener set (M6 x 10 mm) provides secure, reliable fastening for various applications while supporting long service life. Supplied as a 3-piece pack, it is listed as an alternative reference to Jabsco X3001-176F (1 pc.), Jabsco X3001-176FB (3 pcs.), and VW 065.121.953 / 065 121 953 / 065121953, with a shipping weight of 0.10 kg. |
$ 21.73
-
+
|
|
1-2 weeks delivery time The Jabsco X3001-180F stainless steel hexagon head screw is an M6x16 fastening component built for strength and corrosion resistance. Supplied as a Jabsco spare part, it supports reliable service replacement where durable hardware is required. |
$ 11.57
-
+
|
|
1-2 weeks delivery time The Jabsco X3002-147F cam screw is a durable M5x8 slotted fastener made from stainless steel to provide corrosion resistance and dependable holding power in demanding marine and high-stress environments. Its robust construction supports long-lasting performance where reliability and wear resistance matter most. |
$ 11.85
-
+
|
|
1-2 weeks delivery time The Jabsco X3003-176F-P stainless steel screw set provides durable fastening hardware in a 10-piece pack, using a cross recess drive and a half round head design. Each screw is sized M6 x 10 for consistent fitment where this specification is required, and the stainless steel construction supports long-lasting service as a Jabsco spare part. |
$ 24.59
-
+
|
|
1-2 weeks delivery time The Jabsco X3004-095G brass fastening screw in size M4-8 delivers secure, reliable assembly for marine and industrial applications. Built for durability in demanding environments, it supports both repairs and new projects with strength and long service life, making it a practical Jabsco spare part for dependable fastening. |
$ 11.85
-
+
|
|
1-2 weeks delivery time The Jabsco X3004-174F stainless steel slotted cylinder head screw delivers secure, corrosion-resistant fastening with an M6 x 8 mm size suited to marine and industrial applications. Its robust construction supports long service life in demanding environments, and it is listed as an alternative to several VW reference part numbers for easier cross-matching. |
$ 11.85
-
+
|
|
1-2 weeks delivery time The Jabsco X3009-176A replacement component is listed as a Jabsco spare part for service and maintenance needs where this part number is required. |
$ 15.02
-
+
|
|
1-2 weeks delivery time The Jabsco X4000-567A precision key is a durable spare part with 8x7x40 dimensions, built for applications where strength, accuracy, and reliable fit matter. Designed as a high-quality Jabsco replacement component, it supports precise assembly work across various uses. |
$ 14.39
-
+
|
|
1-2 weeks delivery time The Jabsco X4020-105A O-ring sealing component is a NIT-material spare part sized 1.6 x 5.1 inches to provide a tight, leak-free seal across various applications. Its durable construction supports long-lasting performance, and the 0.10 kg shipping weight helps keep handling and stocking straightforward. |
$ 11.85
-
+
|
|
1-2 weeks delivery time The Jabsco X4020-106A sealing O-ring is a genuine spare part for Jabsco manual clutch-driven flexible impeller pumps, supporting a secure seal for reliable pump performance. It is specified as an O-ring 1.6 x 6.1 NIT and is designed to fit between screw X3003-176F and the pump body on compatible pump models including 17810-1300, 51580-2001, and 51580-9001. |
$ 11.85
-
+
|
|
1-2 weeks delivery time The Jabsco X4020-210A sealing O-ring is a durable nitrile component sized 2.4 x 10.6 for reliable sealing in a wide range of applications. Built as a genuine Jabsco spare part, it supports dependable fit and performance where consistent sealing is required. |
$ 11.85
-
+
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.