Yacht-supply24.com supplies a wide range of Jabsco products, including water pump systems, engine cooling pumps, searchlights, blowers, marine wc waste systems, toilets, impellers, and more. Whether you need reliable and efficient pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction, or top-quality marine equipment, Jabsco has got you covered.
Jabsco, a brand under Xylem, is a renowned manufacturer of products for the leisure marine market, with a rich history of over 80 years in servicing general industrial, marine, and sanitary markets. Shop our selection of Jabsco products and enjoy prompt delivery and competitive prices.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco 8963-0005B neoprene impeller is a food-quality, FDA- and 3A Hygienic-certified replacement component built for reliable water and simple media transfer in marine and industrial pump systems. Its 9-blade design, 118 mm diameter, 89 mm width, and 25 mm shaft diameter support efficient flow in medium-pressure applications, while the double flat hub helps maintain a secure drive connection. Rated for approximately 4°C to 70°C operation and suitable for freshwater and saltwater use, it is a strong choice where long-term durability and hygiene are essential. |
$ 637.23
-
+
|
|
1-2 weeks delivery time The Jabsco 8980-0005B flexible impeller is a high-pressure, food-grade Neoprene rubber component built for sanitary pump duties in food, beverage, and pharmaceutical applications. Its 10-blade design with a double flat drive hub (5/8 inch epoxy plastic) supports smooth, steady, pulsation-free flow while gently handling liquids, gels, and pastes with minimal damage to suspended solids. Certified to FDA and 3A requirements, it offers strong chemical resistance and operates within a stated temperature range of 45°F (7°C) to 165°F (73.9°C). |
$ 223.36
-
+
|
|
1-2 weeks delivery time The Jabsco 8980-0021B neoprene impeller is a high pressure replacement component for flexible impeller pumps, built to handle simple fluids such as water. It supports reliable operation in an approximate temperature range of 4°C to 80°C and is widely used both on board and in industrial pumping applications. With a 57 mm diameter, 32 mm depth, 16 mm shaft diameter, double flat drive hub, 10 blades, and a plastic insert, it delivers consistent pumping performance in demanding service. |
$ 129.93
-
+
|
|
1-2 weeks delivery time The Jabsco 8980-0022B neoprene impeller is a durable replacement component built for efficient oil and water transfer. Its flat drive design and ten-blade geometry help deliver reliable pumping performance, while the 2 1/4 in (57 mm) diameter, 1 1/4 in (32 mm) width, and 5/8 in (16 mm) shaft diameter support dependable fit and operation in demanding applications. |
$ 241.24
-
+
|
|
1-2 weeks delivery time The Jabsco 8980-0023B flexible pump impeller delivers efficient fluid movement with a nitrile rubber construction, a plastic core, and a double flat drive hub. It features a 2-1/4 inch (57 mm) outer diameter, 1-1/4 inch (32 mm) depth, and fits a 5/8 inch (16 mm) shaft, using 10 blades for consistent pumping performance. Suitable for water, oily water, light oils, diesel, and beverages such as beer, wine, whiskey, and cider, it is not recommended for brake fluid, and has a shipping weight of 0.10 kg. |
$ 199.52
-
+
|
|
1-2 weeks delivery time The Jabsco 8981-0002B EPDM impeller is a food-grade, high-performance rotor designed for sanitary pump applications in food processing, beverage, and pharmaceutical systems. FDA-approved EPDM material with 3A certification supports hygienic operation, while the 8-blade design promotes efficient fluid movement and smooth pump performance. A double flat drive with a 16 mm shaft diameter ensures a secure fit, and the 65 mm diameter by 51 mm depth sizing supports proper pump matching. Built with a plastic insert and rated for approximately 4°C to 120°C, it offers strong resistance to wear, chemicals, and corrosion for long-lasting reliability. |
$ 276.94
-
+
|
|
1-2 weeks delivery time The Jabsco 8981-0005B neoprene impeller is a flexible 8-blade replacement component designed for dependable pumping in both fresh and salt water. Its neoprene construction (food approved) and double flat drive hub support reliable operation in applications with minimal oil or diesel exposure, while the specified M profile helps ensure proper fit. Regular replacement (ideally annually) helps maintain consistent performance and extend pump service life across compatible Jabsco pump models. |
$ 172.76
-
+
|
|
1-2 weeks delivery time The Jabsco 8983-0002B impeller is a high-pressure EPDM replacement rotor designed for Jabsco hygienic impeller pump applications, including the 28 series. It supports an approximate operating temperature range from 4°C to 120°C and uses a double flat drive hub for the specified shaft size. Food-approved EPDM material and FDA and 3A certifications help support use in hygiene-focused fluid handling where material compatibility must be verified against the pumped medium. |
$ 780.20
-
+
|
|
1-2 weeks delivery time The Jabsco 8983-0005B neoprene impeller is a durable replacement component built for marine, industrial, and food-grade pump systems, delivering efficient water flow through a 10-blade design. Its double-flat, 2-flat drive hub and 25.4 mm shaft diameter help ensure a secure fit and smooth operation across a 4°C to 70°C temperature range. FDA and 3A certifications support use in food-related applications, and the neoprene construction provides strong wear resistance for long service life in freshwater, saltwater, and simple-fluid pumping duties. |
$ 472.66
-
+
|
|
1-2 weeks delivery time The Jabsco 8984-0005B neoprene impeller is a durable replacement component for impeller pumps used in marine and industrial circulation and transfer of simple media such as water. Its food-approved neoprene construction supports hygienic applications and is backed by FDA and 3A certifications, while the approximately 4°C to 70°C temperature range helps maintain dependable performance across varying operating conditions. Commonly used in Jabsco 28 series hygienic impeller pumps (28500-XXXX, 28520-XXXX, 28530-XXXX, 28540-XXXX), it features a double flat drive hub, 9 blades, and a plastic insert for a secure fit in compatible pump designs. |
$ 610.46
-
+
|
|
1-2 weeks delivery time The Jabsco 90058-0001 maintenance service kit is made for the Jabsco 6050-0001 model and supplies key replacement components to support ongoing system functionality. It includes a seal, an O-ring and gasket, and a neoprene impeller to help maintain efficiency and extend equipment service life through regular replacement. |
$ 228.05
-
+
|
|
1-2 weeks delivery time The Jabsco 90061-0031 minor service kit is a maintenance kit for Jabsco equipment that helps support smooth, reliable operation through routine servicing. Supplied with replacement seals, gaskets, and O-rings, it is intended to reduce unexpected downtime, help prevent costly repairs, and promote longer equipment service life for both commercial and recreational use. |
$ 88.47
-
+
|
|
1-2 weeks delivery time The Jabsco 90061-0053 oil changer service kit is a complete maintenance set for later-design 17800-2000 series oil changers with the larger pump and motor introduced around 2002. It includes a food-grade nitrile impeller plus key sealing and hardware parts (shaft seal, cover O-ring, gasket, and end cover screws) to help restore reliable performance, prevent leaks, and extend service life in marine and industrial use, with compatibility for both freshwater and saltwater applications. |
$ 98.02
-
+
|
|
1-2 weeks delivery time The Jabsco 90071-0001 service kit (18770 reference) supports routine maintenance to help keep Jabsco equipment operating smoothly and reliably. Described as a comprehensive kit made with durable materials, it is intended to maintain peak performance, extend service life, and reduce the risk of unexpected downtime. |
$ 1,190.55
-
+
|
|
1-2 weeks delivery time The Jabsco 90105-0003 impeller service kit is a complete maintenance set for Jabsco pump models 11810-0003 and 11810-0013, combining a nitrile impeller with a mechanical seal, O-ring, and gasket to support fast repairs and restored pump efficiency. Built around a durable, wear-resistant 6-blade nitrile impeller and designed for easy installation, it helps reduce downtime in marine, industrial, and food-grade pump systems and is suited for pumping water and food-grade liquids across a 4°C to 70°C operating range. |
$ 366.84
-
+
|
|
1-2 weeks delivery time The Jabsco 90118-0001 service kit is a maintenance and repair kit made for the Jabsco 777-9001 model, supplying key replacement parts to keep the system operating smoothly. It includes a seal, an O-ring and gasket, and a Neoprene impeller to support reliable performance and help extend equipment service life with genuine replacement components. |
$ 140.38
-
+
|
|
1-2 weeks delivery time The Jabsco 90135-0001 minor service kit is a spare-part kit for revitalizing a Jabsco marine pump, helping keep the pump operating smoothly at optimal performance. It is designed for seamless compatibility and easy installation, and it is made with durable materials to support longevity and reliability in demanding marine environments. |
$ 459
-
+
|
|
1-2 weeks delivery time The Jabsco 90197-0000 maintenance kit is a replacement seal and gasket set for Jabsco Quiet Flush and Designer Style electric toilets, designed to restore hygiene, prevent leaks, and keep the system operating efficiently. It is specified for models 37045 and 245 and is also listed as compatible with the 37045, 37245, 37055, 37255, 37075, and 37275 series, with OEM-quality components such as a Joker valve, O-rings, seals, and washers for a proper fit and easy installation. |
$ 40.35
-
+
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.