Yacht-supply24.com supplies a wide range of Jabsco products, including water pump systems, engine cooling pumps, searchlights, blowers, marine wc waste systems, toilets, impellers, and more. Whether you need reliable and efficient pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction, or top-quality marine equipment, Jabsco has got you covered.
Jabsco, a brand under Xylem, is a renowned manufacturer of products for the leisure marine market, with a rich history of over 80 years in servicing general industrial, marine, and sanitary markets. Shop our selection of Jabsco products and enjoy prompt delivery and competitive prices.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco 28220-4105H Pureflo flexible impeller motor pump unit delivers hygienic, self-priming transfer performance for demanding process duties. It combines a robust 400 V, 3-phase, 50 Hz, 1440 rpm, IP55 electric motor with AISI 316 stainless steel wetted parts and a neoprene impeller, providing up to 33 litres per minute at a 3 m head. Designed for food, dairy, cosmetic, pharmaceutical, and beverage applications, it supports clean-in-place procedures or can be stripped for cleaning, handles soft and hard solids, and manages viscosities up to 150 cP. |
$ 3,300.40
-
+
|
|
1-2 weeks delivery time The Jabsco 28220-4122 pump head kit is a hygienic, self-priming flexible impeller assembly built with AISI 316 stainless steel wetted parts and a food-grade EPDM impeller for safe, reliable handling in sensitive environments. It supports up to 33 litres per minute at a 3 m head, delivers a maximum differential pressure of 1.7 bar, and self-primes up to 4.5 m. Designed to fit IEC 71 standard D80 frame motors, it features 1 in RJT (BS1864) ports, clean-in-place or strip-to-clean maintenance, and a long-life mechanical shaft seal for easy upkeep across demanding process duties. |
$ 2,668.68
-
+
|
|
1-2 weeks delivery time The Jabsco 28220-7105 pump head kit is a 1" P40 Pureflo hygienic flexible impeller assembly built for IEC 71 standard D80 frame motors, combining AISI 316 stainless steel wetted parts with a neoprene impeller for reliable sanitary transfer. It delivers up to 33 litres/minute (at 3 m head @ 1500 rpm), self-primes up to 4.5 m, and handles viscosities up to 50,000 cP, making it well-suited to transfer, filling and emptying, and recirculating or mixing duties across food, dairy, cosmetic, pharmaceutical, and beverage applications. |
$ 2,487.87
-
+
|
|
1-2 weeks delivery time The Jabsco 28220-7125 hygienic flexible impeller pump head kit is built for IEC 71 standard D80 frame motors and uses AISI 316 stainless steel wetted parts with a high-pressure neoprene impeller for reliable transfer, filling, and recirculating duties. It delivers up to 33 liters per minute, self-primes up to 4.5 meters, handles viscosities up to 50,000 cP, and supports clean-in-place or strip-to-clean maintenance with a long-life mechanical shaft seal. The kit connects via 25 mm SMS 1145 ports, measures approximately 115 mm long by 120 mm wide, and weighs 2.51 kg (approximately 3.01 kg packed). |
$ 2,586.98
-
+
|
|
1-2 weeks delivery time The Jabsco 28227-0001 shaft extension component is a durable spare part engineered to support enhanced machinery performance, delivering a precision-built solution backed by Jabsco for reliable industrial use. |
$ 512.17
-
+
|
|
1-2 weeks delivery time The Jabsco 28230-2101 flexible impeller pedestal pump is a bare-shaft pump end (no motor) built for demanding transfer, filling, and mixing duties with abrasive or viscous fluids. AISI 316 stainless steel wetted parts, a standard-pressure neoprene impeller, and a nitrile/carbon/ceramic mechanical seal support chemical-resistant operation, while 3/4 in BSP ports simplify installation. Performance information in the provided text includes output up to 33 L/min at a 3 m head at 1500 rpm, self-priming up to 4.5 m, and stated viscosity handling up to 50,000 cP, with additional catalog data noting 10.6 GPM (40 L/min) flow and viscosities up to 4,000 cP. |
$ 2,584.09
-
+
|
|
1-2 weeks delivery time The Jabsco 28231-0103B mechanical seal assembly is a durable replacement sealing component for marine pumps and engines that helps prevent fluid leaks and supports efficient, reliable operation. Built for harsh marine environments with corrosion resistance against saltwater damage, it features a standard carbon/ceramic sealing pair and is specified with a 15 bar (218 psi) pressure rating and a -40°C to 150°C (-40°F to 302°F) temperature range. With a compact 30 mm outer diameter, 18 mm inner diameter, and 6 mm thickness, it is designed for straightforward installation and is noted as suitable for a wide range of Jabsco equipment, including Jabsco 28 series hygienic impeller pumps. |
$ 223.36
-
+
|
|
1-2 weeks delivery time The Jabsco 28231-0203B mechanical seal assembly uses a hard-faced tungsten carbide against ceramic sealing pair to deliver durable, reliable sealing, especially where abrasive or difficult fluids are involved. It is often used in Jabsco 28 series hygienic impeller pumps including 28200-XXXX, 28220-XXXX, 28230-XXXX, 28240-XXXX, 28250-XXXX, and 28260-XXXX, and is supplied as a Jabsco spare part with a shipping weight of 0.08 kg. |
$ 726.59
-
+
|
|
1-2 weeks delivery time The Jabsco 28234-2000 spare component is supplied as a Jabsco spare part identified by part number 28234-2000 for replacement and service needs. |
$ 1,366.81
-
+
|
|
1-2 weeks delivery time The Jabsco 28236-0000 wearplate is a precision-made spare part for the P40 Sanitary Series, built to support durable, reliable operation in sanitary system service. Designed with longevity in mind, it helps maintain consistent performance while meeting Jabsco expectations for quality and dependability. |
$ 461.58
-
+
|
|
Jabsco 28240-2101 - 3/4in S40 Industrial Flexible Impeller Pump Head Kit for IEC 71 D80 Frame Motors
1-2 weeks delivery time The Jabsco 28240-2101 flexible impeller pump head kit is built to fit IEC 71 standard D80 frame motors and supports demanding industrial transfer and circulation duties. AISI 316 stainless steel wetted parts, a neoprene impeller, and nitrile seal trim enhance chemical resistance and service life, while 3/4in BSP ports simplify installation. The kit delivers up to 33 litres/minute at 3 m head at 1500 rpm with a maximum differential pressure of 2 bar, handles viscosities up to 50,000 cP, and self-primes up to 4.5 m for reliable operation across varied applications. |
$ 2,167.01
-
+
|
|
1-2 weeks delivery time The Jabsco 28240-2101E flexible-impeller motor pump unit is built for industrial transferring, filling, emptying, recirculating, mixing, injecting, or sampling duties, combining a 400 V, 3-phase, 50 Hz, 960 rpm IP55 electric motor with chemical-resistant AISI 316 stainless steel wetted parts. It features a neoprene impeller, nitrile seal trim, long-life mechanical shaft seal, self-priming capability, and 3/4 in BSP ports, handling abrasive suspensions and slurries, soaps and foaming solutions, inks, dyes, paints, and viscous adhesives up to 700 cP with a maximum differential pressure of 1.4 bar in a compact approx. 370 x 220 x 180 mm footprint. |
$ 2,358.90
-
+
|
|
1-2 weeks delivery time The Jabsco 28240-2101H industrial flexible impeller motor pump unit combines a 400V 3-phase 50Hz 1440 rpm IP55 electric motor with AISI 316 stainless steel wetted parts to support demanding duties such as transfer, filling and emptying, recirculating and mixing, injection, or sampling. It uses a neoprene impeller with nitrile seal trim and a long-life mechanical shaft seal, and is suited to abrasive suspensions and slurries, soaps and foaming solutions, inks, dyes and paints, and viscous adhesives up to 150 cP. Self-priming up to 4 m and 3/4" BSP ports help simplify installation, while the approximate 370 x 220 x 180 mm envelope and 11.85 kg weight support practical handling. |
$ 2,327.46
-
+
|
|
1-2 weeks delivery time The Jabsco 28300-4105 Pureflo hygienic flexible impeller pedestal pump is built for demanding transfer and process duties in food, dairy, cosmetic, pharmaceutical, and beverage applications. AISI 316 stainless steel wetted parts with a neoprene impeller support durable, hygienic service, while self-priming up to 5 m helps simplify installation. It delivers up to 72 litres per minute at a 3 m head at 1500 rpm, offers a maximum differential pressure of 3.5 bar, and can handle soft and hard solids as well as viscosities up to 50,000 cP. |
$ 3,044.89
-
+
|
|
1-2 weeks delivery time The Jabsco 28303-0000 replacement component is a Jabsco spare part identified by its dedicated part number for service and maintenance needs where the correct OEM reference is required. |
$ 678.93
-
+
|
|
1-2 weeks delivery time The Jabsco 28305-0010 end cover component is a durable, high-quality spare part designed for industrial machinery, helping support reliable performance and efficient operation. Built with precision engineering and made to last, it is intended to enhance machinery performance with dependable Jabsco quality. |
$ 351.38
-
+
|
|
1-2 weeks delivery time The Jabsco 28305-0020 end cover is a spare part built for P80 Series marine pump systems, supporting durable and reliable service in marine applications. Designed specifically as an end cover component, it helps maintain proper pump assembly integrity for continued operation. |
$ 384.13
-
+
|
|
1-2 weeks delivery time The Jabsco 28306-0000 PureFlo 080 wearplate spare part is a durable wear component built to withstand heavy usage while helping protect equipment and support consistent machinery performance. Designed as a reliable replacement wearplate, it provides dependable protection for the intended PureFlo 080 application. |
$ 431.77
-
+
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.