With nearly eight decades of heritage, Barton Marine has been consistently manufacturing and delivering high-quality sailing blocks, track and cars from its production site in Southeast England.
The company was established in 1948 in Whitstable, UK, a location well-known for its rich shipbuilding legacy. The founder, Ron Barton, was a pioneer in the utilization of a fabric-based laminated plastic known as Tufnol and stainless steel to create yachting blocks for leisure marine purposes. These were significantly lighter and more robust than their predecessors.
Being a company characterized by numerous firsts and adopting innovative manufacturing procedures, Barton Marine has established itself as a global frontrunner in the domain of modern, well-engineered sailing hardware and accessories.
One of the most comforting attributes of Barton Marine's offerings is the assurance they provide. With the purchase of Barton Marine equipment, customers are not merely acquiring a hardware piece, but rather making an investment in a company with a rich tradition, which has consistently prioritized innovation and quality.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Barton 60709 is a stainless steel S-hook with integrated spring latch, featuring 6 mm diameter, 73 mm length, and 19 mm width. Designed for secure and quick connections, it prevents accidental release while providing a durable and corrosion-resistant solution for marine applications. |
$ 52.61
-
+
|
|
1-2 weeks delivery time The Barton 60709 is a stainless steel S-hook with integrated spring latch, featuring 6 mm diameter, 73 mm length, and 19 mm width. Designed for secure and quick connections, it prevents accidental release while providing a durable and corrosion-resistant solution for marine applications. |
$ 74.06
-
+
|
|
1-2 weeks delivery time The Barton N64901 is a 30 mm ball bearing sheave with 13 mm thickness and 5 mm bore, moulded from acetal resin. Featuring a Delrin ball race system, it delivers ultra-low friction performance and smooth rotation for high-efficiency block and rigging systems. |
$ 10.19
-
+
|
|
1-2 weeks delivery time The Barton N64906 is a 38 mm ball bearing sheave with 18 mm thickness and 6 mm bore, moulded from acetal resin. Featuring a Delrin ball race system, it delivers ultra-low friction performance and smooth rotation for efficient block and rigging systems. |
$ 14.26
-
+
|
|
1-2 weeks delivery time The Barton 67170 clear wear pads are polyurethane protective films supplied in a pack of two, designed to prevent abrasion, scuffs, and damage on decks and superstructures. Featuring high-performance 3M adhesive backing, they offer durable, UV-resistant, and non-yellowing protection without affecting appearance. |
$ 79.85
-
+
|
|
1-2 weeks delivery time The Barton 52000 Line Tamer is a grey nylon line storage device supplied as a pair, designed to keep cockpits tidy by securing unused ropes and halyards up to 200 mm coil diameter. Featuring a smooth snag-free profile, it provides a practical and safe solution for onboard line management. |
$ 17.53
-
+
|
|
1-2 weeks delivery time The Barton 52001 Line Tamer is a white nylon line storage device supplied as a pair, designed to keep cockpits tidy by securing unused ropes and halyards up to 200 mm coil diameter. Its smooth snag-free profile ensures safe movement onboard while maintaining clean deck organisation. |
$ 17.53
-
+
|
|
1-2 weeks delivery time The Barton 60010 Fuel Whistle is a patented device that provides an audible warning when a fuel tank approaches full, preventing spills during refuelling. Simple to install and eco-friendly, it helps protect decks, reduce fuel waste, and prevent marine pollution. |
$ 78.18
-
+
|
|
1-2 weeks delivery time The Barton 62050 Easy Splice is a lightweight rope splicing tool designed for lines up to 5 mm, supplied with 4 needles. Featuring a balanced construction and simple operation, it enables fast, precise splicing without the need for advanced skills. |
$ 89.76
-
+
|
|
1-2 weeks delivery time The Barton 62053 Baby Splice is a 4 mm splicing tool designed for quick and precise rope splicing, including Dyneema. It enables knot-free splicing with a lightweight and easy-to-use design. |
$ 84.12
-
+
|
|
1-2 weeks delivery time The Barton 60001 ClamSeal™ is a patented, glue-free repair system designed to instantly fix tears in inflatables up to 90 mm, even when wet. Reusable and tool-free, it provides a fast, reliable, and airtight emergency repair above or below the waterline. |
$ 30.83
-
+
|
|
1-2 weeks delivery time The Barton 41201 SkyDock is a 4:1 purchase storage hoist system designed to lift loads up to 80 kg to ceilings up to 4 m high. Supplied as a complete kit with ropes, blocks, straps, and fittings, it enables single-person operation and secure locking for efficient overhead storage. |
$ 763.70
-
+
|
|
1-2 weeks delivery time The Barton 40061 is a round screw inspection cover with a 155 mm aperture, designed for a 165 mm cut-out and 215 mm overall diameter. Manufactured from high-impact polycarbonate, it features an easy-start thread and integrated O-ring seal for secure and watertight access. With a lightweight construction of 169 g and Ø4 mm fastening points, it is suitable for inspection and access panels in marine and technical installations. |
$ 37.08
-
+
|
|
1-2 weeks delivery time The Barton 88000 is a complete outboard motor lifting sling designed for safe handling of engines up to 15 hp, with a maximum load of 50 kg (110 lbs). Made from durable webbing with stainless steel buckles and carabiners, it provides secure lifting and stable positioning of the engine, while allowing quick removal once installed. Adjustable configuration ensures proper balance and fit for a wide range of outboard motors. |
$ 107.94
-
+
|
|
1-2 weeks delivery time The Barton 19101 is a 4-wheel traveller car for 19 mm I-track systems, featuring control line eyes and captive ball bearing wheels. It provides smooth movement with a SWL of 600 kg and break load of 1200 kg. |
$ 204.19
-
+
|
|
1-2 weeks delivery time The Barton 19102 is a 4-wheel traveller car for 19 mm I-track systems, equipped with control line sheaves for smooth and efficient adjustment. It features captive ball bearing wheels for low-friction operation. |
$ 179.68
-
+
|
|
Barton 25100 – Genoa Car with Plunger Stop for 25mm T Track, Ø40mm Sheave, Max Rope 12mm, SWL 1140kg
1-2 weeks delivery time The Barton 25100 is a genoa car with plunger stop designed for 25 mm T track systems, featuring a 40 mm plain bearing sheave for ropes up to 12 mm. Manufactured from marine-grade anodised aluminium with nylon inserts for smooth operation, it delivers high load capacity with SWL 1140 kg and break load 2280 kg. The positive-action stainless steel plunger with easy-grip knob ensures secure and precise positioning under load. |
$ 171.09
-
+
|
|
1-2 weeks delivery time The Barton 25220 is a towable genoa car with 2:1 purchase system for 25 mm T track, designed for remote sail adjustment directly from the cockpit. Featuring integrated control line sheaves within the car body, it provides compact, low-friction operation with reduced risk of line fouling. With a SWL of 1140 kg and break load of 2280 kg, it is suitable for yachts from approximately 6 to 12 meters. |
$ 237.60
-
+
|
What materials are used in the production of Barton Marine cleats and cams?
Barton Marine cleats and cams are produced using high-quality materials to ensure durability and longevity in marine environments. The cleats and cams often utilize materials such as fabric-based laminated plastic called Tufnol, which offers greater protection against salt and wear. Additionally, components made from stainless steel and advanced composites provide strength and resistance, ensuring they last through demanding conditions at sea.
What are the primary functions of Barton Marine blocks on sailboats?
Barton Marine blocks are essential components in sailboat rigging, designed to manage and control lines efficiently. These blocks offer performance advantages by providing smooth handling of sheets, control lines, and other sailing equipment. Made with high-quality materials like carbon fibre and tufnol, they ensure durability and reliability in demanding marine conditions, supporting sailors with excellent control and longevity on deck.
What role do k cams play in Barton Marine's deck hardware systems?
K cams in Barton Marine's deck hardware systems play a crucial role in controlling and securing lines with precision and ease. They are designed to complement genoa cars and travellers, offering sailors enhanced control over sail adjustments. Built to last, Barton Marine’s K cams are part of a trusted range of marine deck hardware, known for durability and reliability around the world.